• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.139-145
• /
• 2004

This paper presents human-in-the-loop evaluations of vehicle stability control(VSC) system using a driving simulator. A driving simulator which contains full vehicle nonlinear model is evaluated by using actual vehicle test data on the same driving conditions. Braking control inputs for Vehicle Stability Control system have been directly derived from the sliding control law based on vehicle planar motion equations with differential braking. Closed-loop simulation results at realistic driving situations have shown that the proposed controller reduces driving effort of a driver and enhances stability of a vehicle.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.981-984
• /
• 1995

The feed system using ball screw is constructed by ball screw, support bering and LM guide, and servo system for driving ball screw. AC servo motr drives ball screw which was connected by coupling. In this study, a new axial direction dynamic modeling of ball screw driving system was developed, and forced vibraition test using the impact hammer was experimented. The simulation result is compared with experimental result, which defines the reliability of mathematical modeling.

• 인터넷정보학회논문지
• /
• 제11권4호
• /
• pp.59-72
• /
• 2010

WIM(Weigh-In-Motion) 시스템은 고속으로 이동 중인 차량의 무게를 측정하는 시스템이다. 기존의 WIM 시스템에서는 등속을 기준으로 차량의 무게를 측정하며 오차율이 10% 범위에 있다. 하지만 운전자의 가 감속 조작과 같은 비정상 주행패턴을 고려하고 있지 않으므로 실제 오차율은 더욱 크다. 이러한 오차를 최소화하기 위해서 비정상적인 주행패턴을 찾고 이를 적용한 개선된 WIM 시스템이 필요하다. 본 논문에서는 기존의 WIM 시스템의 오차율에 영향을 미치는 비정상 주행패턴을 분석하고 오차율을 최소화하는 개선된 WIM 시스템을 설계한다. 개선된 WIM 시스템은 기존의 시스템에 루프센서를 추가한 다단 루프 구조를 가진다. 또한 내부적으로 정의된 측정 함수를 개선하여 비정상 주행패턴별로 측정된 무게를 보정한다. 실험 분석 결과 개선된 WIM 시스템은 기존의 최대 평균 오차율 22.98% 에서 8% 미만으로 오차율이 감소한 사실을 알 수 있다.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.66-70
• /
• 2013

This study examined the relative effects of education and eco-IVIS(in-vehicle information system) to reduce fuel consumption and greenhouse gas emissions. Also the study investigated the increasing of driving workload when drivers interact with intervention technique. Thirty participants randomly assigned into two groups(training and eco-IVIS) and conducted driving before and after the each intervention technique. While driving, we observed three driving behaviors: Frequency of excessive RPM, percent of speeding, and mean fuel efficiency. Also the Driver Activity Load Index was used to rate participants' subjective ratings of driving workload. Although the results showed positive impact of both education and eco-IVIS to increasing the eco-driving behaviors, eco-IVIS was more effective than education. However, we found comparable level of driving workload in the education and eco-IVIS.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.569-578
• /
• 2008

The aim of this study is to propose economical safety driving speed index which those are geometric road status; examine the levels of which those cost-benefit of driving fuel expenditure; are search road safety design and operational technology for driving simulators. For the objective, we analyzed the current status of driving fuel expenditure and driving scenarios by the road alignments, and reviewed driving and technical specifications by the geometric types of road according to the implementation, and extended completion. Throughout the result of this study, diverse related driving information provision service, efficiently driving system is expected to be implemented in the national highway design system.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.60-69
• /
• 2022

Recently, the importance of simulation validation in a virtual environment for autonomous driving system validation is increasing. At the same time, interest in the advancement of the virtual driving environment is also increasing. To develop autonomous driving technology, a simulation environment similar to the real-world environment is needed. For this reason, not only the road model is configured in the virtual driving environment, but also the driving environment configuration that includes the surrounding environments -traffic, object, etc- is necessary. In this article, FMTC, which is a test bed for autonomous vehicles, is implemented in a virtual environment and advanced to form a virtual driving environment similar to that of real FMTC. In addition, the similarity of the virtual driving environment is verified through comparative analysis with the real FMTC.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.536-543
• /
• 2008

When the electric motor car was first introduced, an engineer, responsible for the work related to operation and a conductor for the announcement and management of entrances and the other services like as monitoring the passengers in the platforms used to take together the train for passengers' safe. As new technologies developed and the urban transit system had the automatic driving facilities, automatic door switch and broadcasting systems, to solve the financial problems, most subway systems introduced the one-man operation system. To curtail the operating expense through automatic control and operation for the economical efficiency, the crewless driving system was introduced abroad around 1970 on the light weight train and Japan started the crewless driving system in 2005, Germany started it in June 2008. We examine system requirements of the system and methods to construct safe systems that would be introduced, suitable for one-man operation system or crewless driving system through the surveys and analysis of driving state and the systems.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.603-608
• /
• 2006

As an important and relatively easy to implement technology for realizing Intelligent Transportation Systems(ITS), Adaptive Cruise Control(ACC) automatically adjusts vehicle speed and distance to a preceding vehicle, thus enhancing driver comfort and safety. One of the key issues associated with ACC development is usability and user acceptance. Control parameters in ACC should be optimized in such a way that the system does not conflict with driving behavior of the driver and further that the driver feels comfortable with ACC. A driving simulator is a comprehensive research tool that can be applied to various human factor studies and vehicle system development in a safe and controlled environment. This study investigated driving behavior with ACC for drivers with different driving styles using the driving simulator. The ACC simulation system was implemented on the simulator and its performance was evaluated first. The Driving Style Questionnaire(DSQ) was used to classify the driving styles of the drivers in the simulator experiment. The experiment results show that, when driving with ACC, preferred headway-time was 1.5 seconds regardless of the driving styles, implying consistency in driving speed and safe distance. However, the lane keeping ability reduced, showing the larger deviation in vehicle lateral position and larger head and eye movement. It is suggested that integration of ACC and lateral control can enhance driver safety and comfort even further.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.148-150
• /
• 2008

In this paper, we report the improved driving methode using planar-gate for field emission light source. Due to the cold cathode in field emission device, it has advantage for driving system in terms of high speed pulse driving with narrow duty ratio. This paper shows that our driving method offers the stable and reliable driving system without rapid electric field variation for field emission light source.