• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.28-34
• /
• 2014

A planetary gear train is more compact and endures greater amounts of transmission power compared to other gear systems. Although planetary gear systems operate in small volumes, they are capable of very high efficiency due to the compact combination of their gears in the planetary gear system. They also have outstanding efficiency of only 3% for power transmission, tantamount to the power loss that occurs in each of the shift stages. Given these advantages, planetary gear systems are used in the driving systems of, which are widely used in automobile transmissions, machine tools, semiconductor equipment, and in other areas in industrial fields. Current structural equipment requires higher efficiency and greater torque levels. According to these needs, we have designed a complex planetary gear system which creates higher levels of torque. In this paper, an evaluation of strength designs for the proposed planetary gear system was conducted to ensure the stability of the gear. In addition, a durability analysis based on Miner's rule was performed using RS B 0095 device.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.291-291
• /
• 2000

A vehicle driving simulator is a virtual reality device which a human being feels as if the one drives a vehicle actually. Driving Operation System acts as an interface between a driver and a driving simulator. This paper suggests the driving operation system for a driving simulator. This system consists of a controller, DC geared motor, MR brake, rotary encoders, steeping motor and bevel gear box. Reaction force and torque on the steering system were made by DC_Motor and MR_Brake. Reaction force and torque on the steering system were compare between real car and a driving simulator. The controller based on the 80C196KC micro processor that manage and transfer signal.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.102-109
• /
• 2009

A retarder, as a supplementary brake system that is not friction-based, is frequently used in heavy-duty vehicles generally to slow the vehicles down on inclines. The electric retarder mainly used in a heavy-duty bus is generally placed between the transmission and the axle. The rotor inside the retarder system is attached to the axle. The operation of the retarder within a driven vehicle generates reverse torque due to coast driving force on hypoid gears in the differential gear system. By the reverse torque, scoring or scuffing on the hypoid gear teeth may directly occur. The scoring may be generated due to excessive contact stresses on the tooth surface. In this study, tooth contact stresses and contact patterns were analysed in order to investigate on the tooth scoring phenomenon using a finite element analysis program T900 in which the Hertzian contact stress formula was taken. Backlash, wear and surface finish were considered in the finite element simulation on the scoring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.308-314
• /
• 2016

This paper proposes design guidances for noise reduction of a bank teller cash recycler(TCR). The operating noise of a TCR is required to be reduced because it bothers bank tellers and customers. The operating noise from a TCR is measured and the most influential driving system is examined. To find the main sources of the noise, the frequency spectra are analyzed by comparing with excitation frequencies of the driving system. From the analysis results, we reveals that the main sources of the noise are gear mesh frequency of a certain gear train and its side band frequencies, which is attributed by vulnerable support condition. Consequently, to reduce the operating noise, the structural modification for the gear train support is suggested and its effectiveness for the noise reduction is confirmed experimentally.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.63-71
• /
• 2000

A shift control algorithm of a newly developed two-speed gear shift system is proposed for electric vehicle applications. The algorithm is formulated according to the motor torque map and optimized to obtain the adequate propulsion characteristics for vehicle. Two speed gear system with shift control algorithm has proved greater efficiencies in terms of energy economy with its simplified hardware and software structures. The gear shifting is designed to be carried out by an actuator and the control signal from a vehicle control unit equipped with $\mu$-processor. The results of performances and efficiency of the algorithm by simulation and vehicle test are described.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.115-121
• /
• 1996

Multi-axes driving system is more suitable for FMS(Flexible Manufacturing System) compared with a conventional single-azis driving system. It has some merits such as flexibility in operation, improvement of net working rate, maintenance free because of no gear train, etc. However, studies on position synchronous control for high precision in the multi-axes driving system are not enough. In this paper, a new method of position synchronous control is suggested in order to apply to the multi- axes driving system. The proposed method is structured very simply using speed and position controller based on PID control law. Especially, the position controller is designed to keep position error to minimize by controlling either speed of two motors. The effectiveness of the proposed method is successfully confirmed through several experiments.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1999년도 추계공동학술대회 논문집:21세기지식경영과 정보기술
• /
• pp.477-483
• /
• 1999

이 연구는 인쇄기제어와 같은 기어를 포함한 직류전동기로 가동되는 회전계통 플랜트의 제어에 관해서 적분제어기와 전차수 상태관측기 및 영차홀드로 구성되는 데드비트제어시스템을 제안하고 있다. 샘플링된 연속데이터시스템의 응답은 샘플링사이에 리플이 발생치 않도록 보장할 수 없지만, 제안된 데드비트제어시스템의 응답은 MATLAB시뮬레이션을 통한 사례연구의 결과, 상태귀환형 최적제어나 출력귀환형 제어시스템응답 등에 비하여 정정시간이 횔씬 빠르고, 주어진 샘플링주기 후에 리플없는 출력응답을 얻을 수 있음을 보여준다.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.46-58
• /
• 2018

고해상도 관측위성의 대용량 영상 데이터 송신용인 2축 짐벌식 X-밴드 안테나는 궤도 임무수행 중 안테나 구동에 따라 미소진동을 유발하며, 이는 관측위성의 영상 품질을 저하시키는 요인 중 하나이기 때문에 반드시 절연되어야 할 대상이다. 본 논문에서는 상기 X-밴드 안테나의 방위각 구동에 따른 미소진동절연과 동시에 기존에 제안된 티타늄 블레이드 기어가 소성변형에 취약한 문제점을 보완하기 위해 초탄성 형상기억합금 (SMA)을 활용한 메쉬 와셔 기어를 제안하였다. 상기 SMA 메쉬 와셔 기어의 기본 특성을 파악하기 위해 SMA 메쉬 와셔 두께방향 정하중 시험과 SMA 메쉬 와셔 기어 수준의 회전방향정하중 시험을 실시하였다. 아울러 안테나 조립체 수준의 미소진동 측정시험을 통해 제안된 SMA 메쉬와셔 기어의 진동절연이 효과적임을 입증하였다.