• 안전기술
• /
• 103호
• /
• pp.14-19
• /
• 2006

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• 디지털콘텐츠학회 논문지
• /
• 제10권1호
• /
• pp.121-127
• /
• 2009

자동차 ECU(Electronic Control Unit)는 날이 갈수록 더욱 복잡해지고 많은 기능을 요구하고 있다. 대표적으로 power windows switch, LCM(Light Control Module), mirror control system, seat memory등 운전자 편의 시스템이 개발되어 양산 중에 있다. 또한 현재 업계에서 많은 연구개발이 진행되고 있는 운전자 편의를 위한 DIS(Driver Information System)도 있다. 하지만 이러한 시스템을 운전 중 조작하게 되면 많은 위험이 따른다. 따라서 본 논문에서는 이러한 자동차 편의장치를 음성으로 조작 가능한 음성인식 시스템을 구현하였으며 자동차 잡음환경에서 인식률 향상을 위한 전처리 필터를 적용하여 양호한 인식결과 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.444-449
• /
• 2001

The purpose of the work is to improve comfort of a car seat, especially dynamic comfort which affects driver's discomfort during the long time driving. Definition of dynamic comfort was made before the investigation of which parameter affects seat comfort. In order to optimize design parameters so as to maximize seat comfort as well as to know the cause of discomfort, benchmarking on a target vehicle and competitive vehicles was performed, which showed both the vibration transmission characteristics and the compression set due to dynamic loading should be reduced. As a solution ball rebounds was increased by about 10％ of the original foam, which showed reduction of S.E.A.T. value by 10％ and of compression set by 60％.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.110-121
• /
• 2011

As car seat is the closest part between driver and rider, the interest of the security and comfort of the seat is increasing. This research discovered the best condition for dyeing and finishing to produce a fabric for car seat and also developed the design of fabrication to give the feeling from such a finishing. The best condition of coating finishing solution is aqueous PU 65%, dye resist reagent 20%, water 12%, thicker 3%, and knife thickness 2mm, tenter temperature $170^{\circ}C$, tenter speed 35yard/min, viscosity 12,000cps and stirring time 100kg * 30min. According to the processing time of knife coating upon stirring the change of resin and the uneven of coating quantity was shown. This problems will be solved by means of automatic temperature control apparatus for resin and sealing device through a coming research.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.47-54
• /
• 2017

This study analyzed air suspension seat frame structure and vibration for 50 - 180 kg mass driver to obtain optimum seat design parameter values for the equivalent spring constant and damping coefficient. Various air suspension seat frames were designed following WTS-003 and KS B 6839 standards, and then evaluated using finite elements analysis. Resonance and vibration tests were performed according to the 78/764/EEC standard.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.139-145
• /
• 1999

The design of driver's cab includes the structure of cab frame, the layout of driver's cab equipment and facilities, i.e. driver's desk, seat, windows, floor, interior equipment, cab partition etc. The concept applied to the detail design has to be based on the ergonomics to guarantee the safety, comfort, and easy operation for the driver. In the aspect of manufacture, one more factor 'modulization' has to be considered into the design of sub blocks for cost-down. The design has to be implemented in the space allocated for driver's cab, which space is directly determined by the cab frame, optimized for the layout of driver's cab. The design process and results of the driver's cab for KHST will be described in this paper.

• 분석과학
• /
• 제29권3호
• /
• pp.136-141
• /
• 2016

충남지역에서 운행되는 10대의 순찰차량에서 유리조각의 분포를 연구하였다. 각 차량의 앞좌석(운전석, 조수석)과 뒷좌석에서 유리조각을 채취하였다. 채취영역은 각 좌석에서 등이 접촉하는 부분(이하 등받이로 표기), 엉덩이가 접촉하는 부분(이하 아랫면으로 표기) 및 엉덩이와 등받이의 사이 공간(이하 모서리로 표기)으로 설정하여 채취하였다. 채취영역에서 접착테이프를 사용하여 전사한 뒤 입체현미경을 사용하여 접착테이프에 있는 유리조각을 찾았다. 발견된 유리조각의 총 개수는 679 개였다. 그 중에서 경찰들이 주로 사용하는 앞좌석에서 발견된 유리조각의 수는 471 개(운전석 293, 조수석 178)였다. 유리조각 대부분의 크기는 0.49 mm 이하였다. 이러한 결과는 유리조각의 대부분이 뒷좌석보다 앞좌석에서 주로 발견된다는 것을 보여준다. 이를 통해 앞좌석에 있던 유리조각이 차량을 사용하는 경찰에게 전이되고, 경찰관이 범죄자와 접촉할 경우 이 유리조각이 범죄자에게 2차전이 될 가능성이 높다는 것을 확인할 수 있었다. 따라서 2차전이로 인해 유리조각 증거가 오염되어 증거가치가 훼손될 수 있다. 그러므로 경찰은 순찰차량에서 발생할 수 있는 교차오염에 대한 방지대책을 강구해야 한다.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4751-4755
• /
• 2011

본 연구는 자동차용 시트 Back frame 내부에 설치하여 탑승자의 등부분을 지지하며 편안한 승차감을 제공하는 시트용 서스펜션 시스템에 대한 연구이다. 운전자의 등 전체를 고르게 지지하는 구조로 설계하고 시트 백 프레임과 플라스틱 서스펜션의 조립을 효과적으로 할 수 있는 구조로 개발 하고자 한다. 서스펜션 단품은 운전자의 체압 분포를 고려하여 설계하고 시뮬레이션 해석에 있어서는 실제 모델과 같은 크기를 가지고 하였다. 플라스틱 서스펜션의 해석결과가 실제 측정값에 근접함을 확인하였으며 기존 Wire Type에 비해 양호한 체압분포를 얻을 수 있었다.