• 제목/요약/키워드: Dried Layer

검색결과 233건 처리시간 0.025초

Integrating UAV Remote Sensing with GIS for Predicting Rice Grain Protein

  • Sarkar, Tapash Kumar;Ryu, Chan-Seok;Kang, Ye-Seong;Kim, Seong-Heon;Jeon, Sae-Rom;Jang, Si-Hyeong;Park, Jun-Woo;Kim, Suk-Gu;Kim, Hyun-Jin
    • Journal of Biosystems Engineering
    • /
    • 제43권2호
    • /
    • pp.148-159
    • /
    • 2018
  • Purpose: Unmanned air vehicle (UAV) remote sensing was applied to test various vegetation indices and make prediction models of protein content of rice for monitoring grain quality and proper management practice. Methods: Image acquisition was carried out by using NIR (Green, Red, NIR), RGB and RE (Blue, Green, Red-edge) camera mounted on UAV. Sampling was done synchronously at the geo-referenced points and GPS locations were recorded. Paddy samples were air-dried to 15% moisture content, and then dehulled and milled to 92% milling yield and measured the protein content by near-infrared spectroscopy. Results: Artificial neural network showed the better performance with $R^2$ (coefficient of determination) of 0.740, NSE (Nash-Sutcliffe model efficiency coefficient) of 0.733 and RMSE (root mean square error) of 0.187% considering all 54 samples than the models developed by PR (polynomial regression), SLR (simple linear regression), and PLSR (partial least square regression). PLSR calibration models showed almost similar result with PR as 0.663 ($R^2$) and 0.169% (RMSE) for cloud-free samples and 0.491 ($R^2$) and 0.217% (RMSE) for cloud-shadowed samples. However, the validation models performed poorly. This study revealed that there is a highly significant correlation between NDVI (normalized difference vegetation index) and protein content in rice. For the cloud-free samples, the SLR models showed $R^2=0.553$ and RMSE = 0.210%, and for cloud-shadowed samples showed 0.479 as $R^2$ and 0.225% as RMSE respectively. Conclusion: There is a significant correlation between spectral bands and grain protein content. Artificial neural networks have the strong advantages to fit the nonlinear problem when a sigmoid activation function is used in the hidden layer. Quantitatively, the neural network model obtained a higher precision result with a mean absolute relative error (MARE) of 2.18% and root mean square error (RMSE) of 0.187%.

용융탄산염 연료전지용 화이버 강화 $\gamma$-LiAlO$_2$ 매트릭스의 적층에 의한 강도 증진 (Strengthening of Fiber-Reinforced $\gamma$-LiAlO$_2$ Matrixes for Molten Carbonate Fuel Cell by Laminatin)

  • 현상훈;조성철;홍성안
    • 한국세라믹학회지
    • /
    • 제36권2호
    • /
    • pp.107-115
    • /
    • 1999
  • 용융탄산염 연료전지(Molten Carbonate Fuel Cell)용 알루미나 화이버 강화 ${\gamma}$-LiAlO2 매트릭스의 적층방법에 따른 미세구조 변화 및 강도 증진 효과에 대하여 연구하였다. 테이프 캐스팅법으로 제조한 green sheet 2장을 45$^{\circ}C$에서 1kg/$ extrm{cm}^2$의 압력으로 1분간 hot pressing 하여 제조한 적층 매트릭스와 double casting 시 1단계 캐스팅한 green sheet를 3.5 시간 정도 건조한 뒤 2 단계 캐스팅 하여 제조한 적층 매트릭스의 기공율은 모두 50% 이상이었다. 알루미나 화이버 강화 적층 매트릭스의 강도는 비적층 매트릭스(115gf/$ extrm{mm}^2$)에 비해 70% 이상 증진되었으며 적층에 의해 화이버 배향성에 따른 강도의 편향성을 제거할 수 있었다. Triple casting에 의한 적층 메트릭스의 강도는 double casting 시에 비해 약간 증진되었으나 캐스팅 방향에 따른 강도의 편향성이 존재할 뿐만 아니라 기공율도 50% 이하였다. Double casting에 의한 적층 매트릭스의 강도 (195 gf/$\textrm{mm}^2$)는 hot pressing 하여 제조한 매트릭스 (212gf/$\textrm{mm}^2$)에 비해 약간 낮지만 MCFC 매트릭스 제조공정 면에서 double casting 법이 효율적인 적층공정으로 평가되었다.

  • PDF

"굴비" 제조과정중의 지방의 이동에 대한 조직학적 관찰 (MICROSCOPIC OBSERVATIONS OF FAT TRANSLOCATION IN THE TISSUE OF YELLOW CORVENIA DURING SALTING AND DRYING)

  • 변재형;이응호
    • 한국수산과학회지
    • /
    • 제1권2호
    • /
    • pp.63-71
    • /
    • 1968
  • "굴비" 제조과정중 근섬유의 변화와 지방의 분포 및 이동상태를 조직학적으로 관찰하여 다음과 같은 결과를 얻었다. 생조기는 진피 밑에 피하지방층이 있으며, 혈합육이 지방조직으로 둘러 쌓여 있는 곳이 많다. 대부분의 지방질은 피하지방층에 축적되어 있고, 백색육에는 거의 지방이 분포하지 않았다. 또한 혈합육과 백색육간에 결체조직으로 경계가 이루어지지 않아, 어떤 부위에는 혈합육과 백색육의 경계가 뚜렷하지 않은것 등이 특징이었다. "굴비" 제조과정중 염장공정중에는 피하지방의 일부가 결체조직이나 근섬유간을 통로로하여 침투되어 들어간다. 그러나 건조공노중 침투된 지방은 결체조직을 따라 이동하여 복공을 통하여 외부로 유출한다고 볼 수 있다. 그러므로 "굴비"의 심부백색육에는 거이 지방이 분포하지 않았다 . BHA 처리 "굴비"는 지방의 이동속도가 늦어, 내부에 침투된 지방이 상당양 그대로 잔존하였다. 그리고 "굴비"의 근육조직은 각섬유가 씨로 밀착하여 경계가 뚜렷하지 않는 것을 관찰 할 수 있다. 또한 "굴비" 제품중에는 상당량 지방이 주로 피하지방층에 함유되어 있음을 알 수 있다. 끝으로 본실험에 있어, 조개표본을 제작하는데 편의를 보아주신 부대학교 의과대학 해부학교실 박 해춘하 재청 양교수 그리고 현징경 사진촬영을 도와 주신 국립수산진흥원 김 성준 연구관, 김 복원 연구교사 몇 많은 조언을 주신 부산수산대학 김장양 교수, 신필현 교수에게 심심한 사의를 표한다.

  • PDF

우분퇴비 처리에 따른 다층구조 토양내 음이온의 용출특성 변화 (Elution Patterns of Anions in Multi-layered Soils amended with Cow Manure Compost)

  • 김필주;정덕영;이병열
    • 한국토양환경학회지
    • /
    • 제2권2호
    • /
    • pp.25-33
    • /
    • 1997
  • 비점오염원으로 토양과 수환경에 영향을 미치는 우분퇴비의 영향을 조사하기 위하여 상부와 하부에 연결한 다층토양칼럼을 가지고 음이온의 토양으로부터 용출경향을 조사하였다. 상부 칼럼은 건조 우분 퇴비를 0, 2,4, 6%의 비율로 Ap토양에 처리한후 균일하게 채웠고 하부칼럼은 15, 30, 45cm의 길이의 아크릴칼럼에 B층 토양을 용적비중 1.3g/$\textrm{cm}^3$으로 채운 후 결합하였다. 이렇게 조합된 칼럼을 충분히 포화시킨 후 증류수를 칼럼의 상부에서 일정 수두높이를 유지하면서 칼럼의 하부에서 수집되는 용출수의 수리전도도와 용출된 음이온의 농도를 조사하였다. 상부와 하부의 각각의 수리전도도는 3$\times$$10^{-4}$cm/sec 와 1.6$\times$$10^{-3}$cm/sec 이었고 비특정흡착특성을 지니는 대부분의 수용성 염소와 황산이온은 90%가 0.2 공극수량에서 그리고 대부분의 음이온은 1 공극수량이내에 용출되는 경향을 보였는데 이는 이들 이온이 토양에 가해진 유기물에 의해 이동에 영향을 받지 않았음을 보여주는 것이다. 또한 이들 음이온이 통과하는 토양의 깊이도 이들 음이온의 이동에 영향을 주지 않았음을 알 수 있었다. 그러나 비특정과 특정 모두의 흡착특성을 가지는 황산이온의 경우 용출곡선이 오른쪽으로 약간 이동하여 용출이 지연되는 경향을 보여주고 있다. 그리고 인산이온의 경우 조사된 5 공극수량 이내에서 전혀 용출되지 않았다.

  • PDF

수종 치과용 복합레진의 가수분해 (HYDROLYTIC DEGRADATION OF DENIAL COMPOSITE RESINS)

  • 양규호;김정란
    • 대한소아치과학회지
    • /
    • 제27권2호
    • /
    • pp.370-378
    • /
    • 2000
  • 심미성 수복재로서 임상에서 널리 사용되는 복합레진은 구강내에서 장기간 유지되도록 하기 위하여 그 물성을 향상시킬 필요가 있다. 복합레진의 단점 중 하나로 낮은 마모저항성을 들수 있으며, 이와 관련된 하나의 인자로 수복물의 표면하 분해(subsurface degradation)가 고려되고 있다. 본 연구에서는 알카리성 용액(0.1N NaOH)에 현재 임상에서 많이 이용되는 Clearfil APX (CL, Kuraray). Heliomolar (H,Vivadent), Surefil (S, Dentsply), Tetric Ceram (TC, Vivadent), TPH (Dentsply), Z100 (3M)의 6종의 복합레진을 보관하였을 때 각 제품의 분해저항성을 평가하고자 하였다. 각 제품당 3개의 시편을 제작하여 무게측정을 한 후 0.1N NaOH용액에 저장하여 $60^{\circ}C$에서 보관하였다. 2주후 제거하여 HCl로 중화, 세척 후 $60^{\circ}C$에서 건조하였다. 무게손실, 분해층 깊이, Si 농도등을 기준으로 분해저항성을 평가하여 다음과 같은 결과를 얻었다. 1. 각 제품의 무게손실량은 $0.45\sim3.64%$ 까지 다양하며 Z100, TC, H, S, CL, TPH 순으로 많았다. 2. 각 제품의 표면하 분해층 깊이는 제품마다 다양하여, $10.85\sim73.38{\mu}m$의 범위였고, H, Z100, S, TC, TPH, CL 순으로 깊었다. 3. 각 제품으로부터 용출된 Si 양은 Z100군 2060ppm으로 가장 많고, H, TPH, CL, TC, S순으로 많았다. 4. 무게손실량과 표면하 분해층 깊이사이에 높은 상관관계를 보였다. (r=0.81, p,0.05) 5. 주사전자현미경하 관찰시 NaOH 용액에 보관한 후 레진기질과 필러사이의 결합의 파괴를 관찰할 수 있었다.

  • PDF

The Effect of High-Salted Mineral Water on Blood Pressure and Sodium Excretion

  • Park Seung Kyu;Lee Hae Jin;Kim Dong Heui;Deung Young Kun;Yang Eun Ju;Lim Soo Jung;Ryang Yong Suk;Kim Hyun Won;Lee Kyu Jae
    • 대한의생명과학회지
    • /
    • 제11권3호
    • /
    • pp.275-279
    • /
    • 2005
  • High-salted mineral water (Daehan Deep Water, Korea) that is pumped up from below the sedimentary rock layer of Dadaepo, Busan, Korea has a composition similar with that of deep sea water. Under the well-being boom, the mineral water is processed for various uses including washing or oral administration. However, high concentrations of various minerals in the mineral water are suspected to affect on the physiology of human body, especially on blood pressure (BP). Here, we examined the effect of Hot Mineral(R), dried powder of the mineral water, on the change of BP. Sprague­Dawley rats were grouped and orally administered $2.5\%$ Hot Mineral(R) (group M), $2.5\%$ NaCl (group S) or normal water (group C). Excreted urine was collected in metabolic cage for 24 hours. The systolic blood pressure (SBP) of the group S was remarkably increased (P<0.005) compared with that of the group M and the group C, which showed little changes of the SBP during 2 weeks. While average daily sodium intake were 0.32 mg in the group C, 6.64 mg in the group M and 4.07 mg in the group S, average daily sodium excretion were 11.37 mg, 53.70 mg and 7.75 mg, respectively. These results indicate that the sodium excretion in the group M was much higher than the other two groups. In this study, we suppose that the plenty amount of minerals such as calcium, potassium and magnesium in Hot Mineral? have an effect not to increase the SBP and to prompt sodium excretion out of the body. Therefore, these results suggest that oral administration of appropriate amount of Hot Mineral(R) for limited period does not induce increased SBP.

  • PDF

해부형태적 특징과 SCAR Marker를 이용한 백출의 기원식물 판별 (Discrimination of Atractylodes Rhizome White Using Anatomical Characteristics and SCAR Markers)

  • 방경환;성정숙;박충헌;김동순;박춘근;유홍섭;박희운;성낙술
    • 한국약용작물학회지
    • /
    • 제12권1호
    • /
    • pp.53-59
    • /
    • 2004
  • 국내 한약재 시장에서 유통되고 있는 백출 건재약재의 기원을 판별하고자 해부형태적 특징과 종 특이적인 SCAR 마커 (SAjR2, SAmR1)를 적용한 실험 결과는 다음과 같다. 해부형태적 특징으로 A. japonica에서는 주피에 코르크층이 매우 발달하여 있었고, 코르크층 내부 또는 아래에 석세포대가 연속적으로 발달하고 있었다. 유실은 A. japonica에서 뿌리횡단면에 전체적으로 다수 분포하여 잘 발달하고 있었으며 피충부분과 잘 발달된 방사조직 내에서도 목섬유다발이 다수 관찰됐다. 또한 유세포 내의 침상 결정물도 A. macrocephala보다 많이 함유하고 있었다. 이러한 특징들을 종합한 결과, 국내 유통 국산 및 수입 백출은 모두 A. japonica의 해부형태적 특징을 따르고 있어 A. japonica로 동정되었다. 한편 RAPD clone으로부터 개발된 A. japonica 특이적인 SAjR2를 이용하여 PCR 한 결과 모든 샘플에서 600bp 크기의 한국백출 특이적인 밴드가 형성되었으며, A. macrocephala 특이적인 SAmR1을 이 용한 결과에서는 작물시험장에서 재배중인 A. macrocephala에서만 1200 bp크기의 특이적인 밴드가 형성되어, 시중에서 유통되고 있는 한국백출과 중국백출은 모두 A. japonica로 동정되었다. 결론적으로 해부형태적 특성과 SCAR 마커는 A. japonica와 A. macrocephala 기원식물의 동정과 유통 건재 약재를 판별하기에 유용한 방법이었다.

경화된 상아질의 접합 양상에 관한 주사전자현미경적 연구 (A SCANNING ELECTRON MICROSCOPIC STUDY OF BONDING ASPECTS TO THE SCLEROTIC DENTIN)

  • 이린;이형일;이광원;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.228-243
    • /
    • 1997
  • The changes of microstructures, morphology of sclerotic dentin and bonding aspects generated by an adhesive resin was investigated. Incisors and premolars showing natural cervical abrasions were collected and conditioned with 10 % phosphoric acid or 10 % maleic acid. The sclerotic dentin specimens were then rinsed and blot-dried and applied with dentin adhesive (All Bond 2) to the conditioned dentin surface. To examine the morphologic change of the sclerotic dentin specimen after etching and bonding procedure, the treated specimens were examined by SEM. To analyze the chemical composition of sclerotic dentin and crystals occluding dentinal tubules, the sclerotic dentin specimen was powdered and examined with X-ray Diffractometer. To investigate the Ca/P weight percent ratio within the dentinal tubules, the sclerotic dentin specimen was fractured perpendicularly to the long axis of the tooth from the center of cervical abrasion lesion and then examined with EDX(Energy Dispersive X-ray) microanalyzer. The results were as follows : 1. The increased width of peritubular dentin and the depositions of the irregular amorphous materials within the dentinal tubules were showed in the sclerotic dentin specimens. 2. After the treatment of sclerotic dentin specimen with 10 % phosphoric acid or 10 % maleic acid, the lateral side of tubules rather than cross-sectional tubule openings was showed exclusively at the incisal and gingival incline of the specimens. 3. After the treatment of sclerotic dentin specimen with 10 % phosphoric acid or 10 % maleic acid, the hybrid layer was not formed evidently and the resin tag was not formed or shortly penetrated into the tubules with the thinner diameter. 4. According to the results of XRD analysis of the sclerotic dentin specimen, Hydroxyapatite and Octacalcium phosphate were predominent, however, Whitlockite crystals were rare. 5. The mean Ca/P weight percent ratio analysed from 5 fractured sclerotic dentin specimens was $2.322{\pm}0.170$ at the intertubular dentin, $1.826{\pm}0.051$ within the dentinal tubule.

  • PDF

천에 혈액이 침투되는 특성 및 침투된 혈액이 세탁되는 특성 연구 (The study on the penetration and washing features of blood on the surface of fabric)

  • 김연정;임재희;홍성욱
    • 분석과학
    • /
    • 제30권5호
    • /
    • pp.270-278
    • /
    • 2017
  • 흰색 면(cotton), 폴리에스터(polyester), 레이온(rayon), 나일론(nylon) 천(fabric)에 혈액이 흡수 및 침투되는 특성을 연구하였다. 두께와 직조방법(직물 및 편물)이 다양한 천을 두 번 접어서 천이 4개 층으로 되도록 한 후 여기에 $100{\mu}L$의 혈액을 떨어뜨리고, 이 혈액이 천으로 침투되는 특성을 관찰하였다. 그 결과 혈액이 침투되는 천의 층 수 및 혈액의 모양은 실험에 사용한 천의 섬유 성분, 두께, 직조방법에 따라 달라진다는 것을 알 수 있었다. 혈액을 묻힌 천을 3일 동안 건조한 후 수돗물을 이용해 손빨래하고, 천에 남아있는 잠재혈흔을 Lumiscene으로 증강하여 혈액이 천에 부착되었던 모습과 대조하였다. 그 결과 천의 종류에 따라 혈흔이 세탁되는 특성이 다르게 나타났다. 또한 혈액이 침투되었던 곳의 형광이 주변의 형광보다 강하게 나타나는 것을 확인할 수 있었다. 그러나 세탁 과정에서 혈액이 물리적으로 문질러져서 원래 혈액이 부착된 모습과 다른 모습의 형광을 관찰할 가능성이 있다는 것을 알 수 있었다. 천에 부착된 혈흔을 건조시키는 시간에 따른 세탁특성도 관찰하였다. 다양한 천에 $100{\mu}L$의 혈액을 떨어뜨린 후, 0, 1, 12, 24, 72시간 및 7일 동안 건조하고, 이 천을 세탁한 후 Lumiscene으로 혈흔을 증강하였다. 그 결과 폴리에스터를 제외한 모든 천에서 혈액을 건조하는 시간이 길어질수록 혈흔의 형광이 강하게 나타나는 것을 확인할 수 있었다. 또한 천에 따라서는 혈흔을 7일 동안 건조하면 혈액이 부착되었던 곳보다 그 주변에서 형광이 더 강하게 나타나는 현상을 관찰할 수 있었다.

Centrifugal Partition Chromatography에 의한 황백으로부터 Berberine의 분리 및 정제 (Isolation and Purification of Berberine in Cortex Phellodendri by Centrifugal Partition Chromatography)

  • 김중배;방병호
    • 한국식품영양학회지
    • /
    • 제27권3호
    • /
    • pp.532-537
    • /
    • 2014
  • 황백(Cortex Phellodendri: CP)은 황벽나무(Phellodendron amurense)의 건조된 수피로부터 얻어진다. 이 수피는 한국의 전통 한약제로서 설사, 황달, 무릎과 발의 통증, 요도관 및 피부 감염증에 폭넓게 사용되어 왔다. 이들 기능성 성분의 분리 및 정제는 박층 크로마토크래피, 컬럼 액체 크로마토크래피 및 HPLC와 같은 여러 분석법들이 동양의 약초연구에 이용되어 왔다. 본 연구는 CP로부터 berberine을 분리하기 위해 향류분배 크로마토크래피법(CPC)으로 효과적으로 수행하였다. 두 용매의 CPC 최적조성은 n-butanol: acetic acid: water(4:1:5 v/v/v)이었다. 이동상의 유속은 1,000 rpm 회전력에서 상승법으로 분당 3 mL 속도로 전개시켰다. CPC에서 분리된 분획분은 prep-HPLC로 정제하였다. $^1H$-NMR 스펙트럼은 4.10과 4.20 ppm에서 $3H(-OCH_3)$, 6.10 ppm에서 2H의 ($-OCH_2O-$) proton signal의 공명이 관찰되었다. 2개의 방향족 proton은 이중결합 패턴을 보였다. H-11과 H-12 doublet은 각각 7.98과 8.11에서 나타났다. $^{13}C$-NMR 스펙트럼에서는 C2와 C3의 methylenedioxy group($-OCH_2O-$), C9과 C10에 methoxy group($-OCH_3$)이 4개의 치환된 형태로 보였다. 분리 정제된 berberine의 화학구조는 $^1H$, $^{13}C$-NMR, ESI-MS 데이터 분석으로 확인하였다.