• 융합정보논문지
• /
• 제9권2호
• /
• pp.172-179
• /
• 2019

최근 승강기 산업에서 설치도면과 설계요소에 대하여 설계자동화가 요구되고 있다. 이는 현장 적응성 확보와 설계오류의 감소 그리고 수출 경쟁력 강화에 중요한 역할로 인식되고 있다. 그러나 규모가 작은 기업의 경우 프로그램 개발에 투입할 자원이 충분하지 못해 도면 설계 자동화 프로그램을 개발에 어려움을 겪고 있다. 따라서 규모가 작은 기업도 손쉽게 투자하여 사용할 수 있으면서 사용자들이 생산적인 업무에 집중 할 수 있도록 하는 도면 자동생성 프로그램이 필요하다. 본 논문에서는 파라메트릭 코딩기법을 이용한 도면 자동생성 프로그램 개발하여 제시한다. 이 프로그램은 웹서비스와 연계되어 사용자가 현장 정보를 웹상에 입력하면 자동으로 도면을 작성하여준다. 이는 승강기 도면 작성시간이 줄어 승강기 설치 및 유지 보수에 유용하다.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.65-78
• /
• 2003

This research is to provide practical help in learning hair and makeup illustration skills by presenting techniques for hair and makeup drawing; to serve efficient illustration education; and to enhance the status of beauty and contribute to artistic development. Hair style and makeup techniques include graphical one, pattern-centered one, one using pattern paper, simplifying one and mood one expressing image. Of them, this research made the illustrations to use cosmetics, color pencils and pastel based on the graphical technique. for each design of the illustrations, ethnic, sexy, natural, romantic and gorgeous images, which were considered to be appropriate to the graphical technique, were chosen by the researcher out of hair and makeup styles that appeared in the fashion magazines including Vogue, Gap, Mode et Mode from 2000 through 2001. In particular, they were chosen with focusing on basic styles. The summaries below were found with the experience of making illustrations. Various techniques and skills are required to express the ideas of hair and makeup styles. Of them, the graphical technique is very useful as the primary step to learn various techniques and improve drawing skills. First, the graphical technique may enable not only expressing what is desired to draw as is, but also accurately representing hair and makeup designs so as to convey objective expression. In this regard, it is a proper way to achieve its inherent purpose as conveyance of messages. Second, more accurate styling of hair and makeup is available through graphical expression, which helps understand related practical techniques. In addition, makeup illustration, which is expressed through direct makeup products and instruments, may serve skill improvement since such direct use provides the feeling of real makeup. Third, the graphical technique as a basic drawing skill may unrestrictedly show the artist's expression ability. Fourth, although artistic merits implying individuality and creativity should be shared through illustrations that express the artist's ideas or emotions, the graphical technique is the easiest method to beginners who just started learning of illustration, in that it enables expression without highly advanced skills.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2001

The automated computer-aided drafting technique is attempted for drawing process pictures of axisymmetric solid forgings which are mainly used in automobile industry. For this study basic concepts to draw the shape of an element are described and applied to the 2-dimensional and 3-dimensional modeling of forged parts. 2-dimensional display of process pictures is developed by using AutoLISP language in AutoCAD software of a drafting technique and 3-dimensional view of process pictures is based on the UG/open API and UG/open GRIP languages of Unigraphics software. Testing the developed program to forging of bolts and ballstuds, it was shown to give good results to be applicable in forging industry.

• 소성∙가공
• /
• 제14권7호
• /
• pp.607-612
• /
• 2005

In this paper, warm deep drawing process with local heating and cooling technique was attempted to improve the formability of AZ31 magnesium alloy which is impossibly to form by conventional methods at room temperature by finite element method and experiment. For FE analysis, in first model with considering heat transfer, both die and blankholder were heated to 573K while the punch was kept at room temperature by cooling water. Also distribution of thickness and von Mises stress at room temperature and 498k for warm deep drawing were compared by FEM. Uniaxial tension tests at elevated temperature were done in order to obtain the temperature dependence of material constant under temperature of $293K\~573K$ and cross head velocity of $5\~500mm/min$. The phenomenological model for warm deep drawing process in this work was based on the hardening law and power law strain rate dependency. Deep drawing experiment were conducted at temperatures of room temperature, 373K, 423K, 473K, 498K, 523K, and 573K for the blank and deep drawing tools(holder and die) and at a punch speed of 10mm/min.

• 복식
• /
• 제56권7호
• /
• pp.17-30
• /
• 2006

The objectives of this study are to research into the traditional costume succession in south and north korea, and to compare similarity and difference of kinds, names, drawing of Jegory. Conclusions are described as follows: 1. In sort of Jegory, south and north korea have same kind of Jegory according to traditional form. But in making method, south korea have pursued various style from traditional type to modern type, north korea have maintained just simple and practical basic style. 2. South and north korea have used same or similar names for the basic part of Jegory. But north korea has made new names for constructional needs, so many differences were shown in the name of details. 3. In drawing of Jegory, north korea has hold traditional method and then tried to seek for rational, scientific technique. Also, due to the influence of south korea that advanced in modern aesthetic, drawing of Jegory in north korea were changed to similar.

• 소성∙가공
• /
• 제7권2호
• /
• pp.127-138
• /
• 1998

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network) has been considered. The investigated problem involves the ade-quate selection of the drawing die angle and the correspondent reduction rate in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite ele-ment simulation are selected by using the orthogonal array. Also the orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study it is shown that the application of new technique using ANN and Othogonal array table to the process design of metal forming process is useful method.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.854-859
• /
• 2010

Distribution Automation System(DAS) is designed to improve operational efficiency by acquisition and control of remote data using its components such as central computation units, communication network and feeder remote terminal units. A conventional human machine interface of the DAS adopts a schematic diagram which is made by drawing power equipments on the geographic information system map. The single line diagram is more useful than the schematic diagram for the main tasks of distribution system operation such as protective relay coordination, service restoration and loss minimization. Since the configuration of the distribution line is changed according to the relocation of the open tie switches, the auto-drawing algorithm based on the connection between the sections and the switches is an essential technique. This paper proposes a new auto-drawing algorithm for a single line diagram of distribution systems based on tertiary tree and collision avoidance method. The feasibility of the proposed algorithm has been testified for various cases using practical distribution system with 12 feeders.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.19-31
• /
• 1999

One of the non-photorealistic rendering method, a drawing technique which uses only fine curves and dashed line, is widely employed in an knots and post stamps printing. Engraving of the curves and lines are traditionally performed by human engravers which leads to low productivity in printing preparation. As an effort to improve productivity and quality, a drawing automation method which can easily produce a portrait composed of vector data for laser or chemical engraving is proposed. The method shows that it is possible to draw a portrait by controling the width and length of predefined fine lines according to the gray scales a the end points of each fine lines. A gradually controled weighting factor method is proposed in addition to the author previous works to prevent undesirable boundaries in an identical texture region. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.144-147
• /
• 1997

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network), has been considered. The investigated problem involves the adequate selection of the drawing die angle and the correspondent reduction rate sequence in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite element simulation are selected by using orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study, it is shown that the new technique using ANN is useful method in application to the wide range of metal forming process.

• 한국멀티미디어학회논문지
• /
• 제9권6호
• /
• pp.709-719
• /
• 2006

To protect against unlawful reproductions and distribution, the current paper proposes a digital watermarking technique for architectural drawings produced using a CAD system. First, the POLYLINEs are extracted from the drawing; then, an adaptive algorithm is used to embed a watermark in the characteristics of each POLYLINE. Next, the CIRCLEs are embedded using an adaptive watermarking algorithm related to the radius of circle from drawing. The proposed watermarking scheme is robust to various attacks, such as the geometrical transformation. Additionally, the proposed method satisfies the requirement of transparency for CAD program. It used AutoCAD 2002, which is commonly used as a CAD program for experiments. Experimental results confirmed the robustness and invisibility of the embedded watermarks in several conversions of an architectural drawing.