• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.4
• /
• pp.11-31
• /
• 2018

Nowadays, domestic photovoltaic system market has been expanded and the governmental dissemination policy has been continued. There is only PV system output performance analysis which is called Performance Ratio(PR) analysis. However, there exists many parameters that can affect PV system output. This papers shows the PV system energy performance analysis using meteorological monitoring data. The meteorological monitoring system was installed in the H university and we analyzed the PV system which installed in the H university. We also investigated other three PV systems which located less than 3 kilometers from H university. We evaluated total 4 PV systems through the field survey data, design drawing data and power generation data. Finally, we compared the actual measuring data with the simulation data using PVSYST software.

• Journal of Power Electronics
• /
• v.4 no.4
• /
• pp.197-204
• /
• 2004

Two-stage Power-Factor-Correction (PFC) converters are the most common circuits for drawing sinusoidal and in phase current waveforms from an ac source with a good regulated output voltage. The first stage is a boost PFC converter with average-current-mode control for achieving the near-unity power factor and the second stage is a forward converter with voltage-mode control to regulate the output voltage. Stability analysis and design methods of two-stage PFC converters have previously been discussed using linear models. Recently, new nonlinear phenomena have been detected in pre-regulator boost PFC circuits and a new nonlinear model has been proposed for pre-regulated PFC converters. Therefore, investigation of two-stage PFC converters from the nonlinear viewpoint becomes important because the second stage DC/DC converter adds more complexity to the circuit. So, this paper introduces a study of the stability of two-stage PFC converters. A novel nonlinear model of two-stage PFC converters is proposed. Then, a stability analysis is made based upon this nonlinear model. The high correspondence between the simulated and experimental results confirms our analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.237-241
• /
• 1997

It is necessary to know the accurate field distribution around the high power apparatus, in designing it. To calculate the field around electrodes, we use the Charge Simulation Method(CSM) among several numerical methods and develop the new \"Field Analysis System\", by which we can draw the shape of electrodes, save the drawing in ascii code and apply CSM on the data. In the Field Analysis System, we try several rules for arrangement of simulation charge on CSM and consider their accuracy. At firs we simulate the case with simple electrode geometry and consider the adequacy of the rules. With tole field Analysis System applied the rules, we simulate the main electrode of load switchgear. As a result of the simulation, equipotential line, flux line and field strength on male electrode are drawn.

• Educational Technology International
• /
• v.22 no.2
• /
• pp.169-197
• /
• 2021

Learning agility as high potentials is drawing attention as a competency for leading an uncertain future society. The present study aims to determine the factors of learning agility in higher education context for future society. To address this goal, Major factors related to learning agility were derived through literature review and statistically verified. For statistical analysis, the nationwide data were collected from 1,000 undergraduate students in South Korea by National Youth Policy Institute. The participants asked to answer 29 items of learning agility questionnaires (LAQ). The collected data were analyzed by descriptive statistical analysis, exploratory factor analysis, and confirmatory factor analysis. As a result, learning agility items were verified normality and reliability. Learning agility was identified seven factors; challenging mind, learning responsibility, reflecting experience, intellectual curiosity, systemic thinking, change adaptability, and logical thinking. Also, the structural model fit of the seven factors of learning agility was also confirmed to be good. Based on the findings of the present study, empirical, theoretical, and practical contributions were presented, and suggestions for further research were proposed in detail.

• Computers and Concrete
• /
• v.30 no.2
• /
• pp.113-126
• /
• 2022

Reinforced concrete bearing walls (RCBWs) are one of the most applicable structural systems. Therefore, vulnerability analysis and rehabilitation of the RCBW system are of great importance. In the present study, in order to the more precise investigation of the performance of this structural resistant system, pushover and nonlinear time history analyses based on several assumptions drawing upon experimental research were performed on several models with different stories. To validate the nonlinear analysis method, the analytical and experimental results are compared. Vulnerability evaluation was carried out on two seismic hazard levels and three performance levels. Eventually, the need for seismic rehabilitation with the basic safety objective (BSO) was investigated. The obtained results showed that the studied structures satisfied the BSO of the seismic rehabilitation guidelines. Consequently, according to the results of analyses and the desired performance, this structural system, despite its high structural weight and rigid connections and low flexibility, has integrated performance, and it can be a good option for earthquake-resistant constructions.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.6
• /
• pp.615-621
• /
• 2014

This study suggests the design and assembly drawing of the prefabricated precast concrete arch ammo magazines using the numerical analysis as well as the explosion verification test. The protective capacity of the proposed magazines is identified with the maximum support rotation angles measured by explosion verification tests according to the U.S. Unified Facility Criteria 3-340-02. Using numerical analysis, it is examined that oval-type members are better than the semi-circle ones in terms of protective capacity. Based on this numerical results, the design and assemble drawing for the prefabricated precast concrete arch ammo magazine are developed. It is identified that the structure constructed by invented design and assembly drawing has enough protective capacity against blast pressure caused by 133.75kg TNT explosion. The detonation point cannot be open due to the military security. In sum, it could be concluded that the ammo magazine proposed in this study has reliable protective capacity with enough redundancy. The redundancy means that there are more economic design approach with reducing the curved wall thickness.

• Journal of Elementary Mathematics Education in Korea
• /
• v.24 no.1
• /
• pp.1-30
• /
• 2020

This study was carried out in order to identify the error types of statistical graphs for statistical literacy education. We analyze the meaning of using graphs in statistical problem solving, and identify categories, frequencies, and contexts as the components of statistical graphs. Error types of representing categories and frequencies make statistics consumers see incorrect distributions of data by subjective point of view of statistics producers and visual illusion. Error types of providing contexts hinder the interpretation of statistical information by concealing or twisting the contexts of data. Moreover, the findings show that tasks provide standardized frame already for drawing graphs in order to avoid errors and pay attention to the process of drawing the graph rather than statistical literacy for analyzing data. We suggest some implications about statistical literacy education, ethical problems, and knowledge for teaching to be considered when teaching the statistical graph in elementary mathematics classes.

• Journal of Educational Research in Mathematics
• /
• v.19 no.3
• /
• pp.393-407
• /
• 2009

In this article the definition of similarity and its introduction in Korean middle school textbooks based on the 7th national curriculum are analysed critically. As a result four suggestions are presented. First, on the consideration that the contents related with similarity has been removed in the elementary school curriculum, the meaning of 'constant rate' needs to be understood through the rich experience of drawing enlarged/reduced figures when similarity is introduced in middle school, Second, there are two different ways in enlargement/reduction of figures and in the definition of similarity. Teachers have to keep the limitations of the two ways in mind. Third, the activity of drawing similar figures in enlarged/reduced squared paper needs to be practiced. Last, on 'the relation of similarity' which is in the definition of similarity, it has to be examined whether 'similarity' should be presented in the documents of the national curriculum as a term.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.260-265
• /
• 2013

Purpose: This study was conducted in order to evaluate the quantitative effectiveness of region of interest (ROI) setting in MR-DTI analysis with and without fMRI activation results. Methods: Ten right-handed normal volunteers participated in this study. DTI and fMRI datasets for each subject were obtained using a 1.5T MRI system. For neural fiber tracking, ROIs were drawn using two methods: The drawing points were located in the fMRI activation areas or areas randomly selected by users. In this study, the neural fiber tract targeted the corticospinal tract (CST) Quantitative analyses were performed and compared. The pixel numbers passing through the fiber tract in the individual brain volume were counted. The ratios between the ROI pixel numbers and the extracted fiber pixel numbers, and the ratios between the fiber pixel numbers and the whole-brain pixel numbers were also calculated. Results: According to our results, extracted CST fiber tract in which the ROI was drawn with fMRI activation areas showed higher distribution than drawing the ROI by users' hands. In addition, the quantitatively measured values represented higher pixel distribution: The counted average pixel numbers were 4553.8 and 1943.3. The average ratios of the ROI areas were 33.87 and 22.52. The average percentages of the individual whole-brain volume numbers were 2.06 and 0.87. Conclusion: Results of this study appear to indicate that use of this method can allow for more objectives and significant for study of the recovery of neural fiber mechanisms and brain rehabilitation.