• Journal of Plant Biology
• /
• 제30권2호
• /
• pp.135-149
• /
• 1987

An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee University. The field was planned by the split plot design method and each treatment was given to two plots (40$\times$40 and 100$\times$100 mm) and was replicated three times. Each plot was 9$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, each organ of plants was kept at 9$0^{\circ}C$ and weighed. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. Holocellulose analysis by sodium chlorite method was made. The increasing rate of LAI was high in all plots between 10th and 12th week after sowing and high growth rate of assimilatory organ was observed in low density area of TIBA plot. Between 10th and 12th week after sowing all the experimental plots showed high increasing rate of standing crop and in the process of growth each density area of TIBA plot recorded high increasing rate. In all the plots F/C ratio and RGR were high when the growth rate of assimilatory organ was increasing cosiderably, and the higher the planting density was, the higher F/C ratio was recorded. In all the plots NAR recorded maximum rate before the growth period to show a high increase of RGR. In the process of the growth TIBA plot showed high icnreasing rate of NAR. CGR showed high value in high density areas of all the plots and reached its maximum in the 13th week after sowing. Compared to the other experimental areas the low planting density areas of control plot and TIBA plot showed considerable earlier lignification indicating low Holocellulose content in the growth process.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권4호
• /
• pp.15-27
• /
• 2021

Purpose: This study compares and analyzes the design drawing changes that occur during the design process between hospital design competition and the final detailed design. Based on this, factors that can reduce the rate of changes in drawings are derived. The purpose is to provide basic data to lessen the rate of the changes in the process of architecture design and can be reflected in the design competition guidelines. Methods: In this study, cases of hospitals are selected which are built in 5 recent years. Then compare and analyze the drawings which was drawn in the process from submission of competition to final design. After investigating the design changes that occur after the design competition, analyze the fixed-elements which are the main causes of design changes. Fixed-elements can be narrow down into few architecture-factors such as vertical-core, shafts, public-corridor, HAVC, and mechanical/electrical spaces. Results: Result of the rate of changes in each selected hospital floors can be sorted into variable-elements and fixed-elements which tells that the higher the rate of changes of the fixed-elements, the higher the rate of changes of the variable-elements. Implications: In other words, it can be said as the lower the change rates of the fixed-element, lower changes in whole design changes which represents that the greater the efficiency can be shown in the design process.

• 대한안전경영과학회지
• /
• 제24권4호
• /
• pp.33-39
• /
• 2022

Safety has once again emerged as a social issue due to the enforcement of the Serious Disasters Punishment Act and the occurrence of major disasters recently. As such, the safety culture related to unsafe human behavior is drawing attention as various discussions about the importance of safety and accident prevention are currently being undertaken. This study aims to determine whether changes in the level of safety culture in companies affect the accident rate. To this end, we targeted three workplaces in the same company in the domestic manufacturing industry, and 2,790 people were surveyed using DNV's Safety Will(ISRS-C version 4.0) for safety culture level diagnosis. The change in safety culture level and accident rate were compared and analyzed after carrying out safety culture level improvement activities for 5 years. As a result, the level of safety culture increased by 5.8 points, an overall improvement of 9.5%, while the total number of accidents decreased by 20%, from 5 to 4, indicating a general decreasing trend in accident occurrence. Results confirmed that the change in the level of safety culture affects the accident rate, and the improvement in the level of safety culture affects a reduction in accidents. Therefore, this study suggests that efforts to improve the level of safety culture within a company can be associated with accident reduction and accident prevention outcomes.

• 대한수학교육학회지:수학교육학연구
• /
• 제19권3호
• /
• pp.393-407
• /
• 2009

이 논문은 우리나라 7차 중학교 교과서의 닮음 도입 및 정의의 특징을 비판적으로 분석한 것이다. 연구의 결과는 다음과 같다. 첫째, 초등학교에서 도형의 닮음 관련 내용이 삭제된 것을 고려하여 중학교에서 닮음 도입시 확대도나 축도를 그려 보는 풍부한 경험 속에서 '일정한 비율'의 의미가 내면화되게 할 필요가 있다. 둘째, 중학교 교과서에서 도형을 확대 또는 축소하는 방식 및 닮음 정의에는 서로 다른 두 가지 방식이 있으며, 그 각각의 방식이 지닌 한계에 유의할 필요가 있다. 셋째, 주어진 모눈을 화대 또는 축소한 모눈 위에 닮은 도형을 그리는 활동을 제시할 필요가 있다. 끝으로, 닮음 정의에 나오는 '닮음인 관계'라는 표현과 관련하여, '많음'을 교육과정 문서에 용어로 제시하는 것이 적절한지 재고할 필요가 있다.

• 한국인터넷방송통신학회논문지
• /
• 제19권6호
• /
• pp.145-152
• /
• 2019

파킨슨병은 3대 노인성 질환 중 하나로 인구 고령화에 따라 전 세계적으로 발병률이 증가하고 있으며, 질병이 진행될수록 시간적·경제적인 비용이 높아지기 때문에 병의 진행정도를 파악하는 것과 초기에 진단해내는 것이 매우 중요하다. 본 논문에서는 스마트폰을 이용하여 파킨슨병을 조기 진단(Pre-Screening)할 수 있는 방법을 제안하고자 하였다. 개발한 어플리케이션의 콘텐츠들은 탭핑(Tapping), 떨림(Tremor), 나선형 그리기(Spiral Drawing), 보행(Gait)으로 구성되어 있으며, 통합형 파킨슨병 평가척도(Unified Parkinson's Disease Rating Scale)의 Part III(운동성 검사)를 기반으로 하였다. 이를 활용하여 파킨슨병의 운동성 증상으로 알려져 있는 서동증(Bradykinesia), 진전(Tremor), 자세 불안정(Postural Instability)에 대한 정량적인 진단이 가능하며, 증상의 진행 정도에 대한 모니터링이 가능하다. 이러한 방법은 파킨슨병 진단 및 치료에 유용하게 사용될 수 있을 것으로 기대된다.

• 융합보안논문지
• /
• 제22권5호
• /
• pp.3-9
• /
• 2022

최근 들어 4차산업 연관기술인 사이버물리시스템(CPS) 구축을 위해 물리 모델과 제어회로 시뮬레이션을 위한 가상 제어시스템 구축 작업이 다양한 산업 분야에서 요구가 점점 증가하고 있다. 전자 문서화 되지 않은 문서들에 대한 직접입력을 통한 변환은 시간과 비용이 많이 소모된다. 이를 위해 이미 출력된 대량의 도면을 인공지능을 이용한 객체 인식을 통해 디지털화 작업은 매우 중요하다고 할 수 있다. 본 논문에서는 도면내 객체를 정확하게 인식하고 이를 다양한 응용에 활용할 수 있도록 하기 위하여 도면내 객체의 특징을 분석하여 인공지능을 활용한 인식 기법을 제안하였다. 객체 인식의 성능을 높이기 위하여 객체별 인식 후 그 정보를 저장하는 중간 파일을 생성하게 하였다. 그리고 인식 결과를 도면에서 삭제하여 다음 인식 대상의 인식률을 향상시켰다. 그리고 그 인식 결과를 표준화 포맷 문서로 저장하여 이를 제어시스템의 다양한 분야에 활용할 수 있도록 하였다. 본 논문에서 제안한 기법의 우수한 성능은 위해 실험을 통해 확인할 수 있었다.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.129-134
• /
• 2016

Today, natural ventilation systems are widely applied in multi-family housing. However, studies using the wind data trend line of the blower door test are insufficient. Purpose: Through this study, we will propose a computational method about ventilation performance of natural ventilation systems by conducting blower door test. Method: First, we sealed the gaps between the main systems including the natural ventilation system and conducted the blower door test. Next, the natural ventilation system was opened, the blower door test was conducted, and the difference in air flow rate between when closed and when opened was checked. Blower door test was carried out with a pressure difference of 50 Pa. Result: Therefore, the ventilation performance of the natural ventilation system was checked by drawing a trend line using the data to calculate the air flow rate at 2 Pa of the natural ventilation equipment standard pressure difference.

• 폴리머
• /
• 제25권2호
• /
• pp.208-217
• /
• 2001

테레프탈산 (terephthalic acid), 비스페놀에이 (bisphenol-A)와 에틸렌글리콜 (ethyleneglycol)로 제조된 PET/BPA 공중합체를 용융 압축시켜 필름을 만들어 얼음물에 급냉시켰다. 이 공중합체 필름을 모세관 레오메타로 고상 압출시켜 연신 필름을 만들었다. 이 연신된 필름의 수축율, 결정성, 형태학, 열적, 동역학적 및 기계적 특성을 조사하였다. 공중합체 필름의 융점은 순수 폴리에틸렌테레프탈레이트(PET)보다 낮게 나타났다. 또한 결정화도와 밀도는 연신비와 연신속도의 증가와 더불어 증가하였으나, 연신온도 증가와 더불어 감소하였다. 공중합체 필름의 인장강도와 인장탄성률은 연신비 증가와 더불어 증가하였고, 연신온도 증가에 따라 감소하였다. 연신된 공중합체 필름의 수축율은 연신비와 연신속도가 증가할수록 감소하였다.

• 한국인구학
• /
• 제32권1호
• /
• pp.113-137
• /
• 2009

이 논문의 목적은 족보에 나타난 생몰 기록을 근거로 조선후기의 사망력, 출산력, 인구 증가율을 추정하는 것이다. 족보에서 파악되 양반 남성의 사망력 수준을 식민지기 사망력 추계 및 모델 생명표를 이용해 전체 인구의 사망력으로 변환한 결과 18, 19세기 우리나라 남성의 출생시 기대여명은 23세로 추정되었다. 족보에서 계산된 양반 여성의 출산력 수준으로부터 여성 초혼 연령 및 식민지기 출산력 추계를 이용해서 전체 인구의 출산력을 추정한 결과는 조선 후기의 합계 출산율이 6.81이었음을 알려주었다. 추정된 조선 후기 사망력 및 출산력 지표를 안정 인구를 묘사하는 방정식에 대입해서 추정한 18, 19세기의 인구 증가율은 0.62%였다.