• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created on extrusion or drawing processes. The process factors whichaffect the generation of defects are die semi-angle, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the prossibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of a round hole with process conditions suchas die semi-angle, reduction ratio of cross-sectional area and friction factorat the unsteady state of axi-symmetrical extrusion process when the round hole is alreadyexisted inside the original billet, and also, the effects of process factors are investigated to prevent the possible defects.

• 전자공학회논문지CI
• /
• 제46권5호
• /
• pp.57-70
• /
• 2009

벡터 데이터 기반의 CAD 설계도면은 대부분 산업 분야에서 매우 주요한 저작물로, 저작권 보호 기술이 매우 필요한 콘텐츠로 인식되고 있다. 본 논문에서는 k-means++ 기반의 CAD 설계도면 워터마킹 기법을 제안한다. 하나의 CAD 설계도면은 여러 레이어들로 구성되며, 각 레이어는 폴리라인, 원, 호, 폴리곤 등의 다양한 기하학 객체들로 구성된다. 이들 기하학적 요소들 중 폴리라인 호 및 쿼드폴리곤 객체들은 CAD 설계도면의 기본적인 객체들로 객체 분포의 거의 대부분을 차지한다. 따라서 제안한 기법에서는 설계도면 내에 폴리라인, 쿼드폴리곤 및 호 객체들 중 가장 많은 수를 가지는 객체를 선택한 후, 이들 객체를 많이 분포하는 레이어들을 선택한다. 그리고 선택된 레이어 내에 객체들을 k-means++ 기반으로 그룹화한 다음, 각 그룹내에 기하학 특징 분포에 워터마크를 삽입한다. 이 때 기하학 특징 분포로는 폴리라인의 정규화된 길이 분포, 쿼드폴리곤의 정규화된 면적 분포 및 호의 각도 분포이다. 실험 결과로부터 제안한 기법이 CAD 도면툴 상에서 제공하는 다양한 기하학 편집과 파일포맷변환, 레이어 공격 등에 대하여 강인함을 확인하였다.

• 대한물리의학회지
• /
• 제19권1호
• /
• pp.61-68
• /
• 2024

PURPOSE: This study aimed to provide basic clinical data by analyzing the impact of motion observation training and stretching exercises for improving postures on the neck alignment and balance of stroke patients to enable them to accurately recognize the correct exercise method. METHODS: After sampling 20 stroke patients who met the selection criteria, this study randomly assigned 10 people who were administered the stretching exercise with observation training to the experimental group and 10 who received only the stretching exercise intervention to the control group by drawing lots. Next, neck alignment and balance were pre-tested. All interventions were conducted for 30 minutes, 3 times a week for 4 weeks, and when all the interventions were completed after 4 weeks, neck alignment and balance were re-measured in the same way as the pre-test. RESULTS: The comparison of changes in neck alignment and balance within the experimental and control groups showed statistically significant differences in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). Between the groups, statistically significant differences were found in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). CONCLUSION: A statistically significant difference in neck alignment and balance was observed in the group that underwent stretching exercises combined with observational training and a statistically significant difference was found between the groups. Therefore, it is believed that observation training should be used in clinical practice to improve forward head posture and restore balance in stroke patients.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.295-302
• /
• 2013

상온에서의 2롤 교정공정은 인발선재의 진직도를 향상시키기 위한 가공방법이다. 인발과정에서 생긴 인발선재의 내부 및 외부에 남아 있는 잔류응력은 2롤 교정을 거치면서 변하게 된다. 그에 따라서 인발선재의 선경에도 변화가 생긴다. 인발후 잔류응력이 남아 있는 소재에 대하여 롤사이의 거리(h)와 롤의 교차각도(${\alpha}_u$, ${\alpha}_d$)에 따른 선경변화를 분석하고 최종제품의 잔류응력과 선경변화를 예측하였다. 2롤 교정을 통한 최종제품의 선경변화를 예측해 실험값과 비교 및 검증한 결과 타당한 계산결과를 얻을 수 있었다. 상부롤과 하부롤의 교차각도는 잔류응력과 선경변화에 미치는 영향이 미미하였다. 반면에, 롤사이의 거리(h)는 잔류응력과 선경변화에 영향을 미치는 것을 확인하였다.

• 한국항해학회지
• /
• 제7권1호
• /
• pp.33-62
• /
• 1983

A navigator on bridge needs to know every kinds of motion characteristics of his vessel at sea. Generally when a vessel is completely built, the shipyard makes turning circle diagrams from the results of turing circle tests made during the sea trials for the reference of the vessel's owner. But referring only the data of a turning circle diagram, an officer on bridge can not figure out his vessel's maneuvering characteristics sufficiently, So nowadays the shipyard often adds Z test to turning circle test for more detail references. In this paper the author made Z and turning circle tests at the rudder angles of 15 and and 35 degress separately and in each of the case made a turrning circle diagram from the results of the turning circle test and the esults numerically calculated from mathematical formula made on the base of the maneuvering indices got from the Z test and compared them each other for the purpose of finding the correlations between them. Followings are concluded from the results. An actual turning circle diagram and a calculated one from the results of the Z test at same rudder angle coincides each other well when the center of the calculated circle is transferred by 1.7B toward the direction of the initial turning perpendicularly to the original course and 0.5L toward the direction in parallel with original course in case of the rudder angle of 35 degrees and 1.2B and 0.3L toward each of the above mentioned directions in case of rudder angle of 15 degrees.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.185-193
• /
• 2014

PURPOSE. The purpose of this study was to evaluate the intra-rater reliability and inter-rater reliability of three different methods using a drawing protractor, a digital protractor after tracing, and a CAD system. MATERIALS AND METHODS. Twenty-four artificial abutments that had been prepared by dental students were used in this study. Three dental students measured the convergence angles by each method three times. Bland-Altman plots were applied to examine the overall reliability by comparing the traditional tracing method with a new method using the CAD system. Intraclass Correlation Coefficients (ICC) evaluated intra-rater reliability and inter-rater reliability. RESULTS. All three methods exhibited high intra-rater and inter-rater reliability (ICC>0.80, P<.05). Measurements with the CAD system showed the highest intra-rater reliability. In addition, it showed improved inter-rater reliability compared with the traditional tracing methods. CONCLUSION. Based on the results of this study, the CAD system may be an easy and reliable tool for measuring the abutment convergence angle.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.499-503
• /
• 2006

This report presents a new technical approach for evaluating the fiber orientation of composites using small-angle light scattering (SALS). Glass fiber (GF)/polypropylene (PP) composites with different fiber orientations were prepared by drawing compression-molded specimens. The drawn samples were remelted and then annealed at $150^{\circ}C$ in order to induce a crystalline structure on the fiber surface, and then underwent SALS analysis. The samples showed a combination of circular and streak patterns. The model calculations demonstrated that the number of nuclei on the fiber surface and the thickness of the transcrystalline layer affected the sharpness and intensity of the streak pattern. In addition, the azimuthal angle of the streak pattern was found to be dependent on the direction of the transcrystalline layer, which correlated with the fiber direction. This correlation suggests that the fiber orientation in the composites can be easily evaluated using SALS.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1506-1511
• /
• 2002

A computer aided expert system fur spur, helical, bevel and worm gears was newly developed by using AutoiCAD system and its AutoLISP computer language in the present study. Two methods are available for a designer to draw a gear. The first method needs the gear design parameters such as pressure, module, number of tooth, shaft angle, velocity, materials, etc. When the gear design parameters are inputted, a gear is drawn in AutoCAD system and maximum allowable power and shaft diameter are calculated additionally. The second method calculates all dimensions and gear design parameters to draw a gear when the information such as transmission, reduction ratio, nm, materials and pressure are inputted. The system includes four programs. Each program is composed of a data input module, a database module, a strength calculation module, a drawing module, a text module and a drawing edit module. In conclusion, the CAD system would be widely used in companies to find the geometric data and manufacturing course.

• 한국농촌건축학회논문집
• /
• 제22권3호
• /
• pp.25-32
• /
• 2020

The purpose of this study is to understand what Le Corbuiser has intended on a panoramic landscape view through his modern architectural design. This paper is willing to improve that he considered both natural and local landscape scenery, when he designed architecture with drawing images. He designed various ways to see outside scenery and community culture through ribbon windows, piloti, architectural promenade, picture frame, and rooftop garden as the angle of view inside the building, 'designed landscape panorama' from his architecture. Therefore the contents of the study include the analysis of the local landscapes shown through his architecture by photograph, drawing of a real scenery, and his sketches with biology to find what he has intended. The following conclusions have three points. First, Le Corbuiser has a basic idea to bear a natural and local scenery from his architecture through five points of new architecture. Second, pilotis, ribbon windows, and roof garden with picture frame and architectural promenade are pathways of his architecture to see 'designed landscape panorama'. Third, it comes from his early architecture like Villa Savoye in 1920s to Couvent de Sainte Marie de la Tourette in 1950s, but Ronchamp church converts his idea on previous thoughts.

• 소성∙가공
• /
• 제19권4호
• /
• pp.224-229
• /
• 2010

During the multi-pass wire drawing process, wires suffer a great amount of plastic deformation that is through the cross-section. This generates tensile residual stress at surface of drawn wires. The generated residual stress on surface is one of the problems for quality of wires so that prediction and reduction of residual stresses is important to avoid unexpected fracture. Therefore, in this study, the effect of process variables such as semi-die angle, bearing length and reduction ratio on the residual stress was evaluated through Finite Element Analysis. Based on the results of the Analysis, a prediction model was established for predicting residual stress on the surface of high carbon steel(AISI1072, AISI1082). To identify the effectiveness of the proposed model, X-ray diffraction is used to measure the residual stresses on the surface. As the result of the comparison between calculated residual stresses and measured residual stresses, the model could be used to predict residual stresses in cold drawn wire.