Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Dimensional Change in Drawn Wire Product in the Two Cross-Roll Straightening Process

2롤 교정공정에서 인발선재의 선경변화

  • Received : 2011.12.26
  • Accepted : 2013.01.25
  • Published : 2013.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The two cross-roll straightening process at room temperature is a manufacturing method for improving the straightness of a drawn wire. The distribution and magnitude of the internal and surface residual stresses of the drawn wire are changed after the wire-drawing process through the two cross-rolls; this also results in a change in the diameter of the drawn wire. The remaining residual stresses of the drawn wire after the wire-drawing dimensional changes were analyzed according to the distance between the rolls, oblique angle between the axes of the roll and the wire, predicted residual stresses, and dimensional change in the final product. The oblique angle between the concave and convex rolls did not affect the residual stresses or dimensional change, but the distance between rolls did.

상온에서의 2롤 교정공정은 인발선재의 진직도를 향상시키기 위한 가공방법이다. 인발과정에서 생긴 인발선재의 내부 및 외부에 남아 있는 잔류응력은 2롤 교정을 거치면서 변하게 된다. 그에 따라서 인발선재의 선경에도 변화가 생긴다. 인발후 잔류응력이 남아 있는 소재에 대하여 롤사이의 거리(h)와 롤의 교차각도(${\alpha}_u$, ${\alpha}_d$)에 따른 선경변화를 분석하고 최종제품의 잔류응력과 선경변화를 예측하였다. 2롤 교정을 통한 최종제품의 선경변화를 예측해 실험값과 비교 및 검증한 결과 타당한 계산결과를 얻을 수 있었다. 상부롤과 하부롤의 교차각도는 잔류응력과 선경변화에 미치는 영향이 미미하였다. 반면에, 롤사이의 거리(h)는 잔류응력과 선경변화에 영향을 미치는 것을 확인하였다.

Keywords

Acknowledgement

Supported by : 서강대학교, 한국연구재단

References

  1. Moon C. and Kim N., 2012, "Analysis of Wire Drawing Process with Friction and Thermal Conditions obtained by Inverse Engineering," Journal of Mechanical Science and Technology, Vol. 26, pp. 2903-2911. https://doi.org/10.1007/s12206-012-0711-1
  2. Moon C. and Kim N., 2012, "Study on Dimensional Change in Wire Product during Wire Drawing Process," Trans. of the Korean Society of Mechanical Engineers, Vol. 36, pp. 723-730. https://doi.org/10.3795/KSME-A.2012.36.7.723
  3. Mutrux, A., Berisha, B., Hochholdinger, B. and Hora, P., 2008, "Numerical Modelling of Cross Roll Straightening," LS-DYNA Anwenderforum.
  4. Mutrux, A., Berisha, B. and Hora, P., 2010, "FE Simulation of Cross Roll Straightening: a Strain Tensor Field Approach," American Institude of Physics, Vol. 1252, pp. 941 -948.
  5. Mutrux, A., Berisha, B., Hora, P., 2011, "Prediction of Cyclic Softening in a Medium Carbon Steel During Cross Roll Straightening," Journal of Materials Processing Technology, Vol. 211, pp. 1448 - 1456. https://doi.org/10.1016/j.jmatprotec.2011.03.019
  6. Kim, Y., Lee, S. W., Han, D. S. and Han, G. J., 2007, "The Influence on the Bar Straightness and Plastic Deformation the Roll intersection angle of a Two Roll Straightener," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, pp. 76-80.
  7. Talukder, N. K. D., Singh, A.N. and Johnson, W., 1990, "Cross-Roll Straighteners and their Performance," Journal of Materials Processing Technology, Vol. 21, pp. 101 - 109. https://doi.org/10.1016/0924-0136(90)90033-Q
  8. Wu, B. J., Chanb, L. C., Leeb, T.C. and Ao, L. W., 2000, "A Study on the Precision Modeling of the Bars Produced in Two Cross-Roll Straightening," Journal of Materials Processing Technology, Vol. 99, pp. 202 - 206. https://doi.org/10.1016/S0924-0136(99)00421-5
  9. Nastran, M. and Kuzman, K., 2002, "Stabilisation of Mechanical Properties of the Wire by Roller Straightening," Journal of Materials Processing Technology, Vol. 125-126, pp. 711 - 719. https://doi.org/10.1016/S0924-0136(02)00316-3
  10. Wang, M. T., Li, X. T. and Du, F. S., 2009, "Analysis of Metal Forming in Two-Roll Cress Wedge Rolling Process Using Finite Element Method." Journal of Iron and Steel Research, International, Vol. 16, pp. 38 - 43. https://doi.org/10.1016/S1006-706X(09)60008-X
  11. Srimani, S. L., Pankaj, A. C. and Basu, J., 2005, "Analysis of End Straightness of Rail During Manufacturing," International Journal of Mechanical Science, Vol. 47, pp. 1874-1884. https://doi.org/10.1016/j.ijmecsci.2005.07.005
  12. Kim, W. K., Sin, H. G., Kim, B. H. and Kim, H. Y., 2007, "Straightening of Micro Wires Using the Direct Wire Heating and Pulling Method," International Journal of Machine Tools & Manufacture, Vol. 47, pp. 1046 - 1052. https://doi.org/10.1016/j.ijmachtools.2006.10.002
  13. Balica, J. and Nastran, M., 2002, "An on-line Predictive System for Steel Wire Straightening Using Genetic Programming," Engineering Applications of Artificial Intelligence, Vol. 15, pp. 559 -565. https://doi.org/10.1016/S0952-1976(03)00021-6
  14. Yamashita, T. and Yoshida, K., 2005, "Tensile Straightening of Superfine Wire and Residual Stress Measurement Using Focused Ion Beam," The Japan Society of Mechanical Engineer, Vol. 48, pp. 322 -328.
  15. Lu, H., Zhang, X., Leopold, J., Ling, H. and Changqiao Guo, 2008, "Straightening Model and Prediction of Straightening Stroke of Precision Linear Guide Rail," In Proceedings of ICIRA(2), pp. 321 -328.
  16. Dvorkin, E. N. and Medina, F. M., 1991, "Finite Element Models for Analyzing the Straightening of Steel Seamless Tubes," Trans. American Society of Mechanical Engineer, Vol. 133, pp. 224 - 232.

Cited by

  1. Theoretical analysis and numerical simulation on the process mechanism of two-roller straightening pp.1433-3015, 2018, https://doi.org/10.1007/s00170-017-1120-5