• Tuberculosis and Respiratory Diseases
• /
• v.64 no.6
• /
• pp.439-444
• /
• 2008

Background: A patient with a pleural effusion that is difficult to safely drain by a "blind" thoracentesis procedure is generally referred to a radiologist for ultrasound-guided thoracentesis. But such a referral increases the cost and the patient's inconvenience, and it causes delay in the diagnostic procedures. If ultrasound-guided thoracentesis is performed as a bedside procedure by a medical resident, then this will reduce the previously mentioned problems. So these patients with pleural effusions were treated by medical residents at our medical center, and the procedures included bedside ultrasound-guided thoracenteses. Methods: We studied 89 cases of pleural effusions from March 2003 to June 2005. A "blind" thoracentesis was performed if the amount of pleural effusion was moderate or large. Bedside ultrasound-guided thoracentesis was performed for small or loculated effusions or for the cases that failed with performing a "blind" thoracentesis. Results: "Blind" thoracenteses were performed in 79 cases that had a moderate or large amount of uncomplicated pleural effusions and the success rate was 93.7% (74/79 cases). Ultrasound-guided thoracentesis by the medical residents was performed in 15 cases and the success rate was 66.7% (10/15 cases). The 5 failedcases included all 3 cases with loculated effusions and 2 cases with a small amount of pleural effusion. All the failed cases were referred to one radiologist and they were then successfully treated. If we exclude the 3 cases with loculated pleural effusions, the success rate of ultrasound-guided thoracentesis by the medical residents increased up to 83% (10/12cases). Two cases of complications (1 pneumothorax, 1 hydrohemothorax) occurred during ultrasound-guided thoracentesis. Conclusion: Ultrasound-guided thoracentesis performed as a bedside procedure by a medical resident may be relatively effective and safe. If a patient has a loculated effusion, then it would be better to first refer the patient to a radiologist.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.564-577
• /
• 2015

The objectives of this study were to investigate the possibility of establishing a tree nursery at Saemangeum reclaimed land and to classify landscape trees based on the salt tolerance. A tree nursery (2.0 ha) was made in Gunsan Okgu area in 2012 with underground drain lines on the reclaimed land established in 2010. Salt content of the nursery soil within the 60 cm depth in 2013 was 5.13 dS/m and 8.20 dS/m for the pre-desalinated and non-desalinated lands, respectively. Thirty-six woody plant species (22 tree species and 14 shrub species at ages of 1 to 4) with a total of 3,943 individuals were planted in early April, 2013 and their growth performance was monitored until September of the same year. The average survival rate of the transplanted plants was 71.4% in late September, suggesting the high possibility of establishing a tree nursery at the reclaimed land. Based on the survival rate and tree vigor (amount of healthy leaves and crown development), the following 17 species with some salt tolerance were classified into three groups: "salt tolerant group" (3 species, Tamarix chinensis, Cudrania tricuspidata, Ilex serrata), "recommended group" (5 species, Pinus thunbergii, Albizia julibrissin, Ligustrum obtusifolium, Rosa rugosa, Pleioblatus pygmaeus), "plantable group" (9 species, Zelkova serrata, Hibiscus syriacus, Elaeagnus umbellata, Sorbus alnifolia, Sophora japonica, Metasequoia glyptostroboides, Quercus acutissima, Ulmus parvifolia, Robinia pseudoacacia). Seven tree species that had been adapted to the reclaimed land for three to four years before being transplanted to new reclaimed land in Gunsan Okgu area showed average survival rate of 98%, suggesting that pre-conditioned trees would survive well in the reclaimed land.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.164-185
• /
• 1987

The Korean economy has been developed rapidly in the course of implementing the five year economic development plans since 1962. Accordingly the industrial and employment structure have been changed from the traditional agriculture to modem industrial economy. In the course of implementing export oriented industrialization policies, rural farm economy has been encountered labour shortage owing to rural farm population drain to urban areas, rural wage hike and pressure on farm operation costs, and possibility of farm productivity decrease. To cope with the above problems the Korean government has supplied farm machinery such as power tillers, tractors, transplanters, binders, combines, dryers and etc. by means of the favorable credit support and subsidies. The main objectives of this study are to identify the investment effects of farm mechanization such as B/C and Internal Rate of Return by machinery and operation patterns, changes of labour requirement per 10a for rice culture since 1965, partial farm budget of rice with and without mechanization, and estimation labour input with full mechanization. To achieve the objectives Saemaeul farm mechanization groups, common ownership and operation, and farms with private ownership and operation were surveyed mainly in Nonsan granary area, Chungnam province. The results of this study are as follows 1. The national average of labor input per 10a of paddy has decreased from 150.1Hr in 1965 to 87.2Hr in 1985 which showes 42% decrease of labour inputs. On the other hand the hours of labour input in Nonsan area have also decreased from 150.1Hr to 92.8Hr, 38% of that in 1965, during the same periods. 2. The possible labor saving hours per 10a of Paddy was estimated at 60 hours by substituting machine power for labor forces in the works of plowing, puddling, transplanting, harvesting and threshing, transporting and drying The labor savings were derived from 92.8 hours in 1986 deducting 30 hours of labor input with full mechanization in Nonsan area. 3. Social benefits of farm mechanization were estimated at 124,734won/10a including increment of rice (10%): 34,064won,labour saving: 65,800won,savings of conventional farm implements: 18,000 won and savings of animal power: 6,870won. 4. Rental charges by works prevailing in the area were 12,000won for land preparation, 15,000won for transplanting with seedlings, 19,500won for combine works and 6,000won for drying paddy. 5. Farm income per 10a of paddy with and without mechanization were amounted to 247,278won and 224,768won respectively. 6. Social rate of return of the machinery were estimated at more than 50% in all operation patterns. On the other hand internal rate of return of the machinery except tractors were also more than 50% but IRR of tractors by operation patterns were equivalent to 0 to 9%. From the view point of farmers financial status, private owner-operation of tractors is considered uneconomical. Tractor operation by Saemaeul mechanization groups would be economical considering the government subsidy, 40% of tractor price. 7. Farmers recommendations for the government that gained through field operation of farm machinery are to train maintenance technology for rural youth, to standardize the necessary parts of machinery, to implement price tag system, to intercede spare parts and provide marketing information to farmers by rural institutions as RDA,NACF,GUN office and FLIA.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• Journal of Korean Academy of Nursing
• /
• v.3 no.2
• /
• pp.121-132
• /
• 1973

Introduction : Nursing as a profession is gelling wide acceptance today, especially among independent -minded women with necessary physical, mental and academic qualifications. This is particularly true of "comprehensive nursing", which requires to total dedication on the part if the nurse herself-physical, mental and sociocultural. Such comprehensive approach is like-wise called for in the institutional training of professional nurses. Undergraduate nursing courses nowadays place an increasing emphasis on the microscopic approach of training a nurse as an intelligent and well-balanced human being with an optimum degree of cultural sophistication. Greater attention then ever before is now paid to close observation of the individual traits and aptitude of nursing students, so as to permit full development of individual capabilities, interests and propensities within the concept of "comprehensive human education. " Purpose of study 1. To determine the degree of understanding of the part of nursing students of the various aspects of the subject taught in undergraduate nursing course. 2. To determine the motivation of nursing students in choosing the profession and possible subsequent change or attitude and outlook in the course of under graduated studies, as a means of presenting a new practical approach in nursing training based on the concept of "comprehensive human education. " Problems of study 1. The environments of nursing training will impinge on individual nursing students with different psychological impacts from lower to upper classes of under graduated studies. 2. Educational environments will have varying psychological impacts on students: a. Difference in religious faith among students. b. Difference in campus environments. c. Difference in domestic (family) circumstances. d. Difference in innate capabilities of students, 3. The understanding and attitude of individual nursing students towards the science of nursing will Have a close correlation with their respective motivations in choosing-nursing as a profession, and will also be closely influenced by the peculiarities of the subject taught, tile campus environments, etc, Delimitations of the study 1. Two universities offering 4-year nursing courses were selected. Due to the limited number of potential subjects, the optimum conditions of sample collection could not be fulfilled. 2. Subjects were confined to two classes in each university (sophomores and seniors) but without regard to the ages or scholastic achievements of individual students. 3. The conclusions derived from this study should be limited in application to the subject groups covered by the present study: they should not in any event be extended or applied to other groups. Procedures 1. Subjects: 40 nursing students each from the sophomore and senior classes of the "Y" and "K" universities situated in Seoul, aggregating 160 students altogether. 2. Instruments: Use has been made of questionnaires on (1) family backgrounds and (2) general information concerning. 3. Statistical Method: The findings of the present survey have been subjected to critical analysis as to the means, percentages, Cgi squares (X), standard deviations and the significance of the difference in means. Findings 1. Nursing students have chosen their subject of study with a confident outlook towards their future in society. 2. Horsing students have the necessary abilities to complete the prescribed courses of study. 3. The campus life of nursing students has been judged as very constructive, not with-standing certain in adequacies in the available educational facilities and the shortages of teaching staff. 4. The achievement levels of nursing trainees varied greatly according to their respective educational environments as well as their school years. 5. Clear and definite distinctions were discernible between the two universities as regards certain aspects of this survey, while no signifiant difference was observed in other: a. Sophomores and seniors in both universities gave nearly identical answers to questions concerning (1) motivation in choosing nursing as a profession, and (2) the way of spending leisure hours. b. Both universities revealed similar respective differences between sophomores and seniors as regards the abilities of fulfilling academic requirements ill the basic subjects. c. Educational environments have been found to be somewhat superior in the "Y"university to those of the "K" university, particularly as regard general campus and dormitory conditions. d. The high degree of dissatisfaction with the faculty, found in both universities, was considered to be a consequence of the universal phenomenon of "brain drain" and the relative neglect of the "comprehensive approach"in education.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.1-6
• /
• 2011

A transparent oxide thin film transistors (Transparent Oxide-TFT) have been fabricated by RF magnetron sputtering at room temperature using amorphous indium zinc oxide (a-IZO) as both of active channel and source/drain, gate electrodes and co-sputtered $HfO_2-Al_2O_3$ (HfAIO) as gate dielectric. In spite of its high dielectric constant > 20), $HfO_2$ has some drawbacks including high leakage current and rough surface morphologies originated from small energy band gap (5.31eV) and microcrystalline structure. In this work, the incorporation of $Al_2O_3$ into $HfO_2$ was obtained by co-sputtering of $HfO_2$ and $Al_2O_3$ without any intentional substrate heating and its structural and electrical properties were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The XRD studies confirmed that the microcrystalline structures of $HfO_2$ were transformed to amorphous structures of HfAIO. By AFM analysis, HfAIO films (0.490nm) were considerably smoother than $HfO_2$ films (2.979nm) due to their amorphous structure. The energy band gap ($E_g$) deduced by spectroscopic ellipsometer was increased from 5.17eV ($HfO_2$) to 5.42eV (HfAIO). The electrical performances of TFTs which are made of well-controlled active/electrode IZO materials and co-sputtered HfAIO dielectric material, exhibited a field effect mobility of more than $10cm^2/V{\cdot}s$, a threshold voltage of ~2 V, an $I_{on/off}$ ratio of > $10^5$, and a max on-current of > 2 mA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.49-57
• /
• 2008

This study was conducted to develop an optimal composite recipe for a cookie including yam powder that would be attractive to all age groups. Wheat flour was partially substituted by yam powder to reduce the content of wheat flour. This study has produced the sensory optimal composite recipe by making cookies, respectively with each 5 level of yam powder $(X_1)$, Sugar$(X_2)$, butter$(X_3)$, by C.C.D (Central Composite Design) and conducting sensory evaluation and instrumental analysis by means of RSM (Response Surface Methodology). Sensory items showed very significant values in color, softness, overall quality (p<0.01), flavor (p<0.05) and those of instrumental analysis showed significant values in lightness, redness (p<0.05), spread ratio, hardness (p<0.01). Also sensory optimal ratio of yam cookie was calculated at yam powder 37.35 g, sugar 50.75 g, butter 78.40 g and it was revealed that the factors of influencing yam cookie aptitude were in older of yam powder, butter, sugar.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.119-129
• /
• 2009

Building construction trends have been changed dramatically in terms of size and mass. With the need to maximize land usage, there has been an increase in the construction of high-rise buildings. This affects not only the entire construction duration and cost, but also subsequent construction activities, such as work to increase underground facilities and in reclamation land area construction. These types of site conditions require soft ground reinforcement and the proper uplift water pressure treatment. In general, two kinds of methods have been used for uplift water pressure treatment systems. However, there have been some problems arising as the result of a lack of research and analysis on underground construction techniques, and a reliance on experiments over actual survey and analysis of site conditions. This paper focused on the problems of conventional selection procedure, by analyzing drawings and proposing a kind of modeling for a reasonable procedure. The results were applied to OO project as a sample construction case to be verified in this research. The initial plan in the case project was the Rock Anchor System. However, as there were terrible miscalculations of basic site conditions that had an extraordinary influence on the underground water level, such as the site's proximity to the Han-river, it was necessary to change the plan to include apermanent drainage system. This achieved a direct construction cost reduction \ 406,702,000 and a maximum sayings of 4% of operational cost, based on the 50-year building Life Cycle Cost.