• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.7-15
• /
• 2002

The digital DBS tuner is designed and implemented in a CMOS process using a direct-conversion architecture that offers a high degree of integration. To generate mathched LO I/Q quadrature signals covering the total input frequency range, a fully integrated ring oscillator is employed. And, to decrease a high level of phase noise of the ring oscillator, a frequency synthesizer is designed using a double loop strucure. This paper proposes and verifies a band selective loop for fast frequency switching time of the double loop frequency synthesizer. The down-conversion mixer with source follower input stages is used for low voltage operation. An experiment implementation of the frequency synthesizer and mixer with integrated a 0.25um CMOS process achieves a switching time of 600us when frequency changes from 950 to 2150MHz. And, the experiment results show a quadrature amplitude mismatch of max. 0.06dB and a quadrature phase mismathc of max. >$3.4^{\circ}$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.51-57
• /
• 2010

A dual-mode direct conversion receiver is developed in $0.13\;{\mu}m$ RF CMOS process for IEEE 802.11n based wireless LAN and IEEE 802.16e based mobile WiMAX application. The RF receiver covers the frequency band between 2.3 and 2.7 GHz. Three-step gain control is realized in LNA by using current steering technique. Current bleeding technique is applied to the down-conversion mixer in order to lower the flicker noise. A frequency divide-by-2 circuit is included in the receiver for LO I/Q differential signal generation. The receiver consumes 56 mA at 1.4 V supply voltage including all LO buffers. Measured results show a power gain of 32 dB, a noise figure of 4.8 dB, a output $P_{1dB}$ of +6 dBm over the entire band.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.672-679
• /
• 2011

In this paper, detection algorithm of face region based on skin color of in the TV images is proposed. In the first, reference image is set to the sampled skin color, and then the extracted of face region is candidated using the Euclidean distance between the pixels of TV image. The eye image is detected by using the mean value and standard deviation of the component forming color difference between Y and C through the conversion of RGB color into CMY color model. Detecting the lips image is calculated by utilizing Q component through the conversion of RGB color model into YIQ color space. The detection of the face region is extracted using basis of knowledge by doing logical calculation of the eye image and lips image. To testify the proposed method, some experiments are performed using front color image down loaded from TV color image. Experimental results showed that face region can be detected in both case of the irrespective location & size of the human face.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.735-742
• /
• 2020

The pick & place module is used as a core module in the process equipment for producing and inspecting semiconductor components. The conventional pick & place module has the disadvantage that the precision and durability of the system are reduced and the size and weight of the module are increased by using a conversion device that converts rotary motion into linear motion. In this study, we proposed a pick & place module that implements up-and-down linear motion without a conversion device by improving such disadvantage and employs a linear motor with no limit on average thrust and travel distance. Design parameter values, that can reduce cogging force while maintaining average thrust by selecting parameters for designing a core type linear motor with a large thrust to volume ratio and analyzing the effect of cogging force according to design parameter changes through magnetic analysis, was selected. Average thrust and cogging force were measured for the pick & place module composed of the manufactured linear motor and compared with the design values.

• Journal of Fashion Business
• /
• v.15 no.3
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.169-179
• /
• 1999

In this paper, a GaAs MESFET single-ended resistive mixer with high linearity and isolation is designed. The bias voltage of this mixer is applied only gate of GaAs MESFET to use the channel resistance. The LO is applied the gate and the RF is applied the drain through 7-pole hairpin bandpass filter to obtain the proper isolation thru LO-RF. The IF is extracted from the source with short circuit and lowpass filter. Using extracted equivalent circuits for LO and RF, conversion loss is calculated and compared with result of harmonic balance analysis. Measured conversion loss of this S-band down converter mixer is 8.2~10.5dB by considering the measured 3.0~3.4dB RF 7-pole hairpin bandpass filter loss and IP3in is 26.5dBm at Vg=-0.85~-1.0V in distortion performance.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2035-2044
• /
• 2016

In order to match the voltages between high voltage battery stacks and low voltage super-capacitors with a high conversion efficiency in hybrid energy sources electric vehicles (HESEVs), a high ratio bidirectional DC-DC converter with a synchronous rectification H-Bridge is proposed in this paper. The principles of high ratio step-down and step-up operations are analyzed. In terms of the bidirectional characteristic of the H-Bridge, the bidirectional synchronous rectification (SR) operation is presented without any extra hardware. Then the SR power switches can achieve zero voltage switching (ZVS) turn-on and turn-off during dead time, and the power conversion efficiency is improved compared to that of the diode rectification (DR) operation, as well as the utilization of power switches. Experimental results show that the proposed converter can operate bidirectionally in the wide ratio range of 3~10, when the low voltage continuously varies between 15V and 50V. The maximum efficiencies are 94.1% in the Buck mode, and 93.6% in the Boost mode. In addition, the corresponding largest efficiency variations between SR and DR operations are 4.8% and 3.4%. This converter is suitable for use as a power interface between the battery stacks and super-capacitors in HESEVs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.941-944
• /
• 2015

In this paper study for VSAT(very small aperture terminal) LNB(low noise block). ship LNB was demanded high stability and low noise figure. We designed FEM(Front-End Module) that was operated multi-band. FEM designed was constructed in a multi-band low noise receiver amplifier, a frequency converter, IF amplifier, Voltage Control Oscillator signal generating circuit four circuit using. To convert the multi-band 2.05GHz band, it generates four local oscillator signals, the four(band1, band2, band3, band4) designed to output an IF signal developed conversion apparatus, the conversion gain 64dB, noise figure 1dB or less, output P1dB 15dBm or more, phase noise showed -73dBc@100Hz.

• Journal of Integrative Natural Science
• /
• v.16 no.4
• /
• pp.133-138
• /
• 2023

After the SI system of units was adopted as an international system of units, Korea made a lot of efforts such as administrative and educational guidance on the traditional units that had been used so far. In addition, from July 1, 2007, the government has cracked down on the denotation of non-statutory units of measurement as standard units or auxiliary units in commercial transactions. However, non-statutory weighing units are still used in other forms. It is believed that this is because non-statutory units (= our traditional units) are permeated in our lives and are convenient to use. The general public still finds it difficult to use and mark the SI system of units correctly. This is not a problem unique to Korea. However, if you look at the books that are currently used as university physics textbooks, the SI system of units and the non-legal units of other countries are marked in such a way that they can be accurately converted. Only the traditional units of our country are disappearing under the pretext of unit unification. Accordingly, we propose that our units should not be neglected in university education, but should be labeled together. The purpose of this study is to raise the necessity of reorganizing the unit conversion between the SI unit system and the traditional life improvement unit, which continues to be the convenience of life, and applying it in university physics education to enable the conversion with our traditional unit, and to educate the importance of the meaning and function of our traditional unit.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.685-695
• /
• 2011

Satellite cells are skeletal muscle progenitor/stem cells that reside between the basal lamina and plasma membranes of skeletal fibers in vivo. These cells can give rise to both myogenic and adipogenic cells. Given the possible role for differentiation of satellite cells into adipocytes in marbling and in some pathological disorders like sarcopenia, knowledge of the proteins involved in such process remains obscure. Using two-dimensional polyacrylamide gel electrophoresis coupled with mass spectrometry, we investigated the proteins that are differentially expressed during adipogenic differentiation of satellite cells from bovine longissimus muscle. Our proteome mapping strategy to identify the differentially expressed intracellular proteins during adipogenic differentiation revealed a total of 25 different proteins. The proteins up-regulated during adipogenic differentiation of satellite cells like Cathepsin H precursor, Retinal dehydrogenase 1, Enoyl-CoA hydratase, Ubiquinol-cytochrome-c reductase, T-complex protein 1 subunit beta and ATP synthase D chain were found to be associated with lipid metabolism. The down-regulated proteins like LIM protein, annexin proteins, cofilin-1, Rho GDP-dissociation inhibitor 1 and septin-2, identified in the present study were found to be associated with myogenesis. These results clearly demonstrate that the adipogenic conversion of muscle satellite cells is associated with the up-regulated and down-regulated proteins involved in adipogenesis and myogenesis respectively.