• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.978-984
• /
• 2015

본 논문에서는 유무인항공기에서 사용될 통달거리 200 km, 전송속도 45 Mbps급 데이터 전송장비의 RF 송수신기에 대해 다룬다. RF 송수신기는 Ku 대역에서 동작하도록 설계되었으며, 상/하향 변환모듈, 고출력 증폭 모듈, 전단 처리 모듈로 구성된다. 제안된 RF 송수신기의 성능을 만족시키기 위해 출력신호 레벨이 10 W급인 전력 증폭기가 요구되었으며, 이는 GaN 소자기반의 전력증폭기로 구현되었다. 또한, 적응형 전송속도 변환기능이 요구되었고, 이를 위해 다양한 대역폭의 신호를 수신할 때의 상호 주파수 간섭을 최소화하기 위하여 6종의 SAW 필터로 구성된 수신기 구조가 적용되었다. 시스템 요구사항의 만족 여부를 확인하기 위해 AWR 시뮬레이션 툴을 이용하였다.

• International Journal of Contents
• /
• 제2권1호
• /
• pp.29-33
• /
• 2006

The common-source low noise amplifier(LNA) with inductive degeneration using a genetic algorithm is designed and tested for a down converter in an industrial, scientific and medical (ISM) band application and a wireless broadband internet service (WiBro). The genetic algorithm optimizes the reflection coefficients to be well matched the input and output ports between multistage transistor amplifiers, and it generates low voltage standing wave ratio as well as gain flatness of the amplifier. The stability and the gain flatness of the LNA have been improved by combining the matching circuits and the series feedback microstrip lines with inductive degeneration at common-source port. In the frequency range of ISM band and WiBro application operating at $2.3GHz{\sim}2.5GHz$, the measured power gain and maximum voltage standing wave ratio (VSWR) of the LNA are $41{\pm}0.5dB$ and 1.3, and the noise figure of the LNA is lower than 0.85dB. The above results are agreed well with the theoretical values of the amplifiers.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.133-145
• /
• 2009

In this paper a modular high performance MV-to-LV rectifier based on a cascaded H-bridge rectifier is presented. The proposed rectifier can directly connect to the medium voltage levels and provide a low-voltage and highly-stable DC interface with the consumer applications. The input stage eliminates the necessity for heavy and bulky step-down transformers. It corrects the input power factor and maintains the voltage balance among the individual DC buses. The second stage includes the high frequency parallel-output DC/DC converters which prepares the galvanic isolation, regulates the output voltage, and attenuates the low frequency voltage ripple ($2f_{line}$) generated by the first stage. The parallel-output converters can work in interleaving mode and the active load-current sharing technique is utilized to balance the load power among them. The detailed analysis for modeling and control of the proposed structure is presented. The validity and performance of the proposed topology is verified by simulation and experimental results.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.539-546
• /
• 2014

This paper describes an ultra-precision electronic clinometer, which is based on the capacitive-based fluid type, for detection of small inclination angles. The main parts of the clinometer low-noise electronics are two capacitance measurement circuits for converting the capacitances of the capacitors of the clinometer into voltages, and a differential amplifier for obtaining the difference of the capacitances, which is proportional to the input inclination angle. A 16 bit analog to digital (AD) converter is also embedded into the same circuit board, whose output is sent to a PC via RS-232C, for achieving a small noise level down to tens of ${\mu}v$. A compensation method, which is referred to as the delay time method for shortening the stabilization time of the sensor was also discussed. Experimental results have shown the possibility of achieving a measurement resolution of $0.0001^{\circ}$ as well as the quick measurement with the delay time method.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.473-487
• /
• 1995

A loud speaker-driven zero-c.o.p. thermoacoustic refrigerator where an automotive catalytic converter is utilized as a stack has been fabricated and investigated experimentally. Without any heat exchangers at both ends of stack(and thus with zero c. o. p.), temperatures on the stack are measured and various heat transfer rates are calculated from the measured temperatures. Temperatures on the stack have been also calculated numerically using a finite difference method. The measured temperatures are in fair agreement with the calculated temperatures for lower frequency than 300Hz, however, the former deviates from the latter considerably for higher frequency. Two types of c. o. p. have been defined as appropriate to the experiment. While the nominal c. o. p. is zero(the condition in which the pumped heat flow rate in the pore exactly cancels the axial heat conduction down the stack), the true c. o. p. is found to be about 0.14 for 300Hz from the experiments.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.22-28
• /
• 2009

This paper presents a fast received signal strength indicator (RSSI) circuit for wireless communication application. The proposed circuit is developed using power detectors and an analog-to-digital converter to achieve a fast settling time. The power detector is consisted of a novel logarithmic variable gain amplifier (VGA), a peak detector, and a comparator in a closed loop. The VGA achieved a wide logarithmic gain range in a closed loop form for stable operation. For the peak detector, a fast settling time and small ripple are obtained using the orthogonal characteristics of quadrature signals. In $0.18-{\mu}m$ CMOS process, the RSSI value settles down in $20{\mu}s$ with power consumption of 20 mW, and the maximum ripple of the RSSI is 30 mV. The proposed RSSI circuit is fabricated with a personal handy-phone system transceiver. The active area is $0.8{\times}0.2\;mm^2$.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.307-310
• /
• 2001

본 논문에서는 광대역 무선가입자망(BWLL)의 핵심부품인 기지국용 모뎀의 상향링크 수신기의 설계 및 구현에 관하여 연구하였다. 수신기는 정합필터와 디지털 다운 컨버터, 그리고 동기회로로 구성되어 있다. 동기회로의 경우 심벌 타이밍 복구를 위하여 가드너 알고리즘을 사용하였고 반송파 주파수 복구를 위하여 4승법을 사용하였으며 반송파 위상 복구는 DD알고리즘을 사용하였다. 성능 분석을 위하여 제안된 알고리즘에 대한 시뮬레이션 결과와 VHDL로 코딩되어 FPGA에 구현된 실제회로의 결과를 비교, 분석하였다. 실험에 사용된 칩은 Alter사의 APEX20KE 시리즈의 60만 게이트 칩이다. 성능분석 결과 주파수 옵셋이 심벌율의 4.7% 까지 동기기가 잘 동작 하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권4호
• /
• pp.258-264
• /
• 2015

The first 77 GHz transceiver that applies a heterodyne structure-based linear frequency modulation-frequency shift keying (LFM-FSK) front-end module (FEM) is presented. An LFM-FSK waveform generator is proposed for the transceiver design to avoid ghost target detection in a multi-target environment. This FEM consists of three parts: a frequency synthesizer, a 77 GHz up/down converter, and a baseband block. The purpose of the FEM is to make an appropriate beat frequency, which will be the key to solving problems in the digital signal processor (DSP). This paper mainly focuses on the most challenging tasks, including generating and conveying the correct transmission waveform in the 77 GHz frequency band to the DSP. A synthesizer test confirmed that the developed module for the signal generator of the LFM-FSK can produce an adequate transmission signal. Additionally, a loop back test confirmed that the output frequency of this module works well. This development will contribute to future progress in integrating a radar module for multi-target detection. By using the LFM-FSK waveform method, this radar transceiver is expected to provide multi-target detection, in contrast to the existing method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.45-46
• /
• 2007

In order to go digital broadcasting in Korea, it is conducted various policies in the country which be expanded network, be increased digital broadcasting hours. And broadcasting stations in the country close down analog broadcasting until 2012. Moreover IPTV is a method of delivering broadcast television and on-demand, rich media content that uses an IP(Internet protocol network) as the medium. And an IP is regarded as a very favorable approach for the future "Medium for Digital TV". However It is not easy to replace the entire digital infrastructure. And there are some problems in the digital infrastructure for Digital TV(i.e. channel zapping delay). Moreover user require service. IPMG is to solve these problems. IPMG is digital converter that allows receive and transmit signal by using many kinds of medium for Digital TV. Moreover IPMG provides users a Network PVR service. In this paper we developing, manufacturing IPMG and analyze its performance.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.405-412
• /
• 2010

The purpose of this paper is to compare complexity and to assess flexibility of competing transponder architectures for satellite communication services. For performance comparison, we consider three channelization techniques: digital down converter(DDC) based on the use of the cascaded integrator-comb(CIC) filter, tuneable pipeline frequency transform(T-PFT) based on the tree-structure(TS) and variable oversampled complex-modulated filter banks(OCM-FB) based on the polyphase FFT(P-FFT). The comparison begins by presenting a basic architecture of each channelization method and includes analytical expressions of the number of multiplications as a computational complexity perspective. The analytical results show that DDC with CIC filter requires the heavy computational burden and the perfect flexibility. T-PFT based on the TS provides the almost perfect flexibility with the low complexity over DDC with the CIC filter for a large number of sub-channels. OCM-FB based on the P-FFT shows the high flexibility and the best computational complexity performance compared with other approaches.