• East Asian mathematical journal
• /
• 제16권2호
• /
• pp.183-197
• /
• 2000

• 대한수학회지
• /
• 제38권3호
• /
• pp.503-521
• /
• 2001

A change of Finsler metric L(x,y)longrightarrowL(x,y) is called a Randers change of L, if L(x,y) = L(x,y) +$\rho$(x,y), where $\rho$(x,y) = $\rho$(sub)i(x)y(sup)i is a 1-form on a smooth manifold M(sup)n. Let us consider the special Randers change of Finsler metric LlongrightarrowL = L + $\beta$ by $\beta$. On the basis of this special Randers change, the purpose of the present paper is devoted to studying the conditions for Finsler space F(sup)n which are transformed by a special Randers change of Finsler spaces F(sup)n with ($\alpha$,$\beta$)-metrics of Douglas type to be also of Douglas type, and vice versa.

• 대한수학회논문집
• /
• 제16권4호
• /
• pp.649-658
• /
• 2001

We shall find the condition for a Finsler space with a special ($\alpha$.$\beta$)-metric L($\alpha$.$\beta$) satisfying L$^2$ =2$\alpha$$\beta$ to be a Douglas space. The special Randers change of the above Finsler metric by $\beta$ is also studied.

• 호남수학학술지
• /
• 제46권2호
• /
• pp.198-208
• /
• 2024

In this paper, we find the conditions for a homogeneous Finsler space with an invariant infinite series (α, β)-metric to be of Berwald type. Also, we derive the necessary and sufficient condition for such a metric to be a Douglas metric.

• 수산경영론집
• /
• 제53권1호
• /
• pp.1-16
• /
• 2022

This paper aims to propose a new systematic approach to analyze the factor productivity and to investigate those characteristics of factor productivity in operational and managerial perspectives. The Cobb-Douglas production function is adopted to estimate the labor and capital productivity. In estimating those productivities the data of The Research on the Actual Condition of Coastal Fisheries (RACF), especially those of Jeon-Nam Province are used. The statistical analysis of RACF data shows that the characteristics are a little bit different between labor and capital of the operational equipment in the coastal fisheries. The Cobb-Douglas type production function is useful in estimating the factor productivity, especially in case of 'coastal Stow-net fishery' even though the limited data is used. However, in case of 'trap fishery,' the Cobb-Douglas production function appears to have some limitations in estimation. This implies that estimating the factor productivities in fisheries employing broad perspectives and various methods are needed.

• 한국습지학회지
• /
• 제20권2호
• /
• pp.190-200
• /
• 2018

본 연구는 공업용수 공급사업에 따른 경제적 가치를 확인하기 위하여 생산함수 접근법에 기반한 한계생산가치를 추정하였다. 이를 위해 Cobb-Douglas, Translog, Sector 더미변수를 포함한 Trasnslog 생산함수를 기준으로 11개 산업유형별로 구분된 4가지 자료세트(Case)를 이용하여 분석하였다. 분석결과, 전 산업 평균 한계생산가치는 각각 3,217~5,357원/ton, 2,994~4,569원/ton, 3,620~5,342원/ton로 나타났으며, 산업유형별 결과는 가구 및 기타제조 산업에서 가장 크게 추정되었고, 섬유 가죽산업에서 가장 낮은 한계생산가치를 보였다. 전체적으로 Cobb-Douglas 함수에 의한 결과가 높게 나타났으며, 자료세트에 따른 변동성 또한 Cobb-Douglas 함수에서 크게 나타났다. 생활용수에 비해 공업용수의 경제적 가치에 관한 연구는 그동안 미흡하였으나, 향후 활발한 연구를 통해 다학제간 합의가 필요할 것으로 판단된다.

• 대한수학회논문집
• /
• 제15권2호
• /
• pp.339-348
• /
• 2000

We introduce the notion of the Finsler metrics compat-ible with a special Riemannian structure f of type (1,1) satisfying f6+f2=0 and investigate the properties of Finsler space with them.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

• Korean Journal of Mathematics
• /
• 제22권3호
• /
• pp.429-441
• /
• 2014

In this work we study two a posteriori error estimators of hierarchical type for lowest-order mixed finite element methods. One estimator is computed by solving a global defect problem based on the splitting of the lowest-order Brezzi-Douglas-Marini space, and the other estimator is locally computable by applying the standard localization to the first estimator. We establish the reliability and efficiency of both estimators by comparing them with the standard residual estimator. In addition, it is shown that the error estimator based on the global defect problem is asymptotically exact under suitable conditions.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.126.1-126.1
• /
• 2003

Adrenal medullary chromaffin cells secrete catecholamines in response to nicotinic agonists (Douglas ＆ Rubin. 1961; Wakade, 1981; Amy ＆ Kirshner, 1982). Several types of voltage-dependent Ca2+ channels are present on adrenal chromaffin cells, but the role of each type in the catecholamine secretion process remains controversial. (omitted)