• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.315-320
• /
• 2022

일반적인 나선형 인덕터의 경우에 비대칭 구조를 가짐에 따라 포트의 방향에 영향을 받게 된다. 본 논문에서는 2층이면서 대칭 구조를 가질 수 있는 나선형 인덕터를 제안하고 시뮬레이션 및 주파수 특성을 분석하였다. 기존 단층 대칭형 인덕터가 3.9~4.2nH의 인덕턴스를 갖는 것과 비교하여 제안된 2층 대칭 나선형 인덕터는 포트에 변함없이 0.3~1.2GHz 범위에서 11~12nH의 인덕턴스, 800MHz에서 약 4.4의 품질계수, 약 2.7~2.8GHz의 자기공진주파수를 가진다. 이는 기존 일반적인 나선형 인덕터가 포트에 따라 큰 차이를 갖는 것과 비교하여 포트의 방향에 대한 영향이 적은 것을 확인할 수 있었다.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.97-104
• /
• 2010

In this paper, we conducted MATLAB simulation using the reflectance formula and the Planck's black body radiation principle, for the purpose of identifying the opimum material and thickness of anti-reflective coating from double layered structures. We found that the optimum condition was obtained when refractive index of upper layer is 1.44 and that of lower layer is 2.29. As materials close to these refractive indices, $MgF_2$ as the upper layer and $HfO_2$, ZnS, $TiO_2$ as the lower layer were suggested. The best result in an average reflectance of 2.759% was obtained from a double layered structure of $MgF_2$ 94 nm/ZnS 55 nm.

• Earthquakes and Structures
• /
• 제27권1호
• /
• pp.17-29
• /
• 2024

The traditional double story isolated structure is a derivative of the base isolated and inter-story isolated structures, while the new double story isolated structure represents a novel variation derived from the traditional double story isolated structure. In order to investigate the seismic response of the new double story isolated structure, a comprehensive structural model was developed. Concurrently, models for the basic fixed, base isolated, inter-story isolated, and traditional double story isolated structures were also established for comparative analysis. The nonlinear dynamic time-history response of the new double story isolated structure under rare earthquake excitations was analyzed. The findings of the study reveal that, in comparison to the basic fixed structure, the new double story isolated structure exhibits superior performance across all evaluated aspects. Furthermore, when compared to the base isolated and inter-story isolated structures, the new double story isolated structure demonstrates significant reductions in inter-story shear force, top acceleration, and inter-frame displacement. The horizontal displacement of the new double story isolated structure is primarily localized within the two isolation layers, effectively dissipating the majority of input seismic energy. In contrast to the traditional double story isolated structure, the new design minimizes displacements within the inter-isolation layer situated in the central part of the frame, as well as mitigates the overturning forces acting on the lower frame column. Consequently, this design ensures the structural integrity of the core tube, thereby preventing potential collapse and structural damage.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1720-1730
• /
• 1995

Finite-difference analysis was conducted to study the natural convection of a stably stratified salt-water solution in an annulus due to lateral heating. The main purpose of this study is to examine in detail the multi-layered flow structure. Calculation was thus made for R $a_{\eta}$=2*10$^{5}$ and 6.5*10$^{5}$ . Formation of layered flow structure, merging process of layers, the corresponding temperature and concentration distributions, Nusselt number variations with time are examined. Numerical results show that in each layer, the temperature profile looks 'S`-shaped and the concentration profile is uniform due to the convective mixing. The formation of the roll and the layer is governed by natural convection due to the temperature gradient and the merging process of the layer by diffusion of the concentration.ation.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.12-17
• /
• 2014

본 논문에서는 고전압에서 동작하는 마이크로칩의 안정하고 튼튼한 정전기 보호 성능을 구현하기 위해 이중 극성 소오스를 갖는 DPS_EDNMOS 변형소자가 제안되었다. 제안된 DPS는 N+ 소오스로 부터 전자 풍부 영역이 측면 확산되는 것을 방지하기 위해 N+ 소오스 측에 P+ 확산층을 의도적으로 삽입한 구조이다. 시뮬레이션 결과에 의하면 삽입된 P+ 확산층은 고전자 주입에 의해 발생하는 깊은 전자채널의 형성을 효과적으로 막아주고 있음을 알 수 있었다. 따라서 종래의 EDNMOS 표준소자에서 문제시 되었던 더블 스냅백 현상을 해결할 수 있었다.

• 한국물환경학회지
• /
• 제38권4호
• /
• pp.171-176
• /
• 2022

Recently, an autotrophic single-stage nitrogen removal (ASSNR) process based on the anaerobic ammonium oxidation (ANAMMOX) reaction has been proven as an economical ammonia treatment. It is highly evident that double-layered gel beads are a promising alternative to the natural biofilm for ASSNR because of the high mechanical strength of poly(vinyl alcohol) (PVA)/alginate structure and efficient protection of ANAMMOX bacteria from dissolved oxygen (DO) due to the thick outer layer. However, the thick outer layer results in severe mass transport limitation and consequent lowered bacterial activity. Therefore, the effects of the thickness of the outer layer on the overall reaction rate were tested in the biofilm model using AQUASIM for ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB) and ANAMMOX bacteria. A thickness of 0.5~1.0 mm is preferred for the maximum total nitrogen (TN) removal. In addition, a DO of 0.5 mg/L resulted in the best total nitrogen removal. A higher DO induces NOB activity and consequent lower TN removal efficiency. The optimal density of AO B and NO B density was 1~10% for a 10% ANAMMOX bacterial in the double-layered PVA/alginate gel beads. The real effects of operating parameters of the thickness of the outer layer, DO and concentrations of biomass balance should be intensively investigated in the controlled experiments in batch and continuous modes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 1997

Electroluminescent(EL) dcvice based on organic thin layers have attracted lots of interests because of thier possible application as large-area light-emitting displays. It was known that MEH-PPV and 1, 1, 4, 4, -Tetraphenyl-1, 3-butadiene(TPB) has red and blue emission peak at 580nm and 480nm, respectively. In this study, MEH-PPV films and TPB films were prepared by spin coating and vacuum deposition method, respectively. Films of MEH-PPV and TPB double layer were also prepared by the same method. Photoluminescent(PL) characteristics of these single and doubler layers were investigated, where a cell structure of glass substrate/ITO/MEH-PPV and/or TPB/Al was employed. It was found that the photoluminescent efficiency of TPB film was higher than that of MEH-PPV film with a single layer and also with a double structure. These films have also different I-V characteristics.

• 한국광학회지
• /
• 제14권4호
• /
• pp.359-364
• /
• 2003

편광에 따른 성능 변화가 작은 deep-ridge 도파관 구조에 제작이 용이한 double-sided 프로세스를 이용하여 구현할 수 있는 편광에 무관한 매우 짧은 결합 길이를 가지는 double-sided deep-ridge 도파관 구조를 가지는 새로운 수직 방향성 결합기를 제안하고 여러 가지 구조 파라미터들이 결합길이에 미치는 영향에 대하여 연구하였다. 도파관 폭의 변화에 대한 결합길이의 변화는 코어 두께의 변화에 대한 결합길이의 변화보다 작게 나타나는 것을 볼 수 있었다. 내부 클래딩 영역의 두께가 감소할수록, 코어 두께가 감소할수록 결합 길이가 감소함을 볼 수 있었다. 또한 같은 코어 두께에 대해서는 내부 클래딩 영역의 두께가 감소할수록, 같은 내부 클래딩 영역의 두께에 대해서는 코어 두께가 감소할수록 편광에 관계없이 결합 길이가 같아지는 도파관 폭이 작아짐을 볼 수 있었다.

• Advances in Computational Design
• /
• 제2권2호
• /
• pp.133-146
• /
• 2017

This study aimed to investigate the effect of initial member length an imperfection in the load carrying capacity of double-layer domes space structures. First, for the member length imperfection of each member, a random number is generated from a normal distribution. Thereupon, the amount of the imperfection randomly varies from one member to another. Afterwards, based on the Push Down analysis, the collapse behavior and the ultimate capacity of the considered structure is determined using nonlinear analysis performed by the OpenSees software and this procedure is repeated numerous times by Monte Carlo simulation method. Finally, the reliability of structures is determined. The results show that the collapse behavior of double-layer domes space structures is highly sensitive to the random distribution of initial imperfections.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.