• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.85-93
• /
• 2012

We propose a new expression of the near-field gain correction to calculate the on-axis far-field gain from the onaxis near-field gain for a directive antenna. The new expression is represented by transversal vectorial transmitting characteristics of two antennas that are measured by planar near-field equipment. Due to the advantages of the photonic sensor, the utilization of the new expression realizes the measurements of the on-axis far-field gains for two kinds of double ridged waveguide horn antennas within 0.1 dB deviation from 1 GHz to 6 GHz without calibrating the photonic sensor system.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.321-332
• /
• 1998

Various meleorologlcal dada obtained by SODAR system in shoreline area surrounding Boryung power plant have been analysed to investigate atmospheric diffusibility. Important conclusion may be summarized as follows; (i) Stability classification scheme based on co (standard deviation of wind direction in degree for averaging time of 1 hour) appears to evaluate certain atmospheric velocity and : indicate horizontal mean wind speed. Thus different scheme for stability classification seems to be preferable in order to appropriately estimate lateral and vertical dispersion coefficients cy and cz, respectively. (ii) As a result of comparisons between 3 available schemes for estimating of mixing height, best one turned out to be the double height scheme where height corresponds to maximum cw.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.160-167
• /
• 2000

We investigated a uniform temperature zone, produced by double flame structure of a coflow CH4/air partially premixed flame, to be used as a temperature calibration source for laser diagnostics. A broadband N2 CARS(coherent anti-Stokes Raman spectroscopy) system with a modeless laser was used for temperature measurement. When the stoichiometric ratio was 1.5, we found the uniform temperature zone in radial direction of the flame of which the averaged temperature was 2110 K with standard deviation 24 K. In the stoichiometric ratio range between 2.0 and 2.5, we found very stable temperature-varying zones in vertical direction at the center of the flame. The size of the zone was approximately 15 mm and it covered a temperature range from 300 K to 1900 K. We also suggest that this zone can be used as a calibration source for 2-D PLIF(planar laser induced flurescence) temperature measurement.

• 한국경영과학회지
• /
• 제23권4호
• /
• pp.63-73
• /
• 1998

With the success of flexible manufacturing systems(FMSs), flexible assembly systems(FASs) have been developed to automatic factories further. As in a cellular FMS, a celluar FAS is considered as the most flexible and feasible assembly systems configuration. This paper presents a method for the integrated layout design in cellular FASs. Unlike the traditional paper, this paper deals with the formation of cells and the layout of cells for jobs with operation times on different machines. The procedure in this paper consists of two distinct phases. The first phase presents machine arrangement in a double rows flowline. cell formation not to allow intercellular movements, and integrated layout design in cellular FASs considering the characteristics of FAS, layout, and production factors This phase uses older optimal algorithm. The second phase proposes to balance the system with an objective of reducing the degree of workload deviation in the cells. Simulated annealing method is used to balance the system. This phase also shows the integrated layout design in cellular FASs with the cost less than total cost of the first phase.

• 센서학회지
• /
• 제12권6호
• /
• pp.241-248
• /
• 2003

An electrochemical humidity sensor was fabricated with poly(1,5-diaminonaphthalene) film coated on a gap of two splitted gold electrodes, which were made by vacuum deposition. Response currents according to humidity were measured by the potential sweep method and chronoamperometry. The stability of the polymer film was improved by double step chronoamperometry using the applied voltage of ${\pm}0.5$ Vdc. The response time determined by the pulse technique was about ${\sim}50$ msec and the relative standard deviation of current response was within ${\pm}5.0%$. The response current of the film was intrinsically humidity dependent. The film exhibited a non-linear but reproducible response in ordinary range of relative humidity. The linear equations were $I(nA)=0.28{\times}%RH-1.01$ between 10 to 70 %RH and $I(nA)=6.05{\times}%RH-403.21$ between 70 to 90 %RH.

• KSBB Journal
• /
• 제25권1호
• /
• pp.67-72
• /
• 2010

In this study, we developed a comprehensive correlation for better prediction of the activated sludge concentration in the relationship between measurement of optical density by the Beer's law and sludge properties. Effects of activated sludge properties, which are sludge types and anaerobic storage time, show that absorbance deviation for sludge properties decreased on wavelength of light source near to 950 nm. We also developed a method to measure limitation with non-linear correlation on the measurement of high concentration by the Beer's law using a double layer probe cell and empirical equations.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.849-851
• /
• 2015

본 연구에서는 비대칭 이중게이트 MOSFET의 상하단 게이트 산화막 두께 비에 대한 문턱전압이하 스윙 및 전도중심의 변화에 대하여 분석하고자한다. 문턱전압이하 스윙은 전도중심에 따라 변화하며 전도중심은 상하단의 산화막 두께에 따라 변화한다. 비대칭 이중게이트 MOSFET는 상단과 하단의 게이트 산화막 두께를 다르게 제작할 수 있어 문턱전압이하 스윙의 저하 등 단채널효과를 감소시키기에 유용한 소자로 알려져 있다. 본 연구에서는 포아송방정식의 해석학적 해를 이용하여 문턱전압이하 스윙을 유도하였으며 상하단의 산화막두께 비가 전도중심 및 문턱전압이하 스윙에 미치는 영향을 분석하였다. 결과적으로 문턱전압이하 스윙 및 전도중심은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 또한 채널길이 및 채널두께, 상하단게이트 전압 그리고 도핑분포함수의 변화에 따라 문턱전압이하 스윙 및 전도중심은 상호 유기적으로 변화하고 있다는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.85-89
• /
• 1997

A microstructure of realistic ZnO varistor was constructed by Voronoi network and studied cia computer simulation. The grain size and standard deviation was calculated with new method and have good agreement with experimental data. In this network, the grain boundary conditions of three different type are randomly distributed. The three electrical boundary conditions . (1) type A junctions (high nonlinearity); (2) type B junctions (low nonlinearity); (3) type C junctions (linear with low-resistivity) are fitted from the experimental measurement. The electrical properties were studied by varying the boundary type concentration and the disorder parameter d. The shape of I-V characteristic curve of the network is affected by the type concentration and the disorder parameter has an effect on the double inflected region.

• Applied Science and Convergence Technology
• /
• 제27권5호
• /
• pp.86-89
• /
• 2018

Observations of neutrino oscillations are very strong evidence for the existence of neutrino masses and mixing. From recent experimental results on neutrino oscillation, we find that neutrino mixing angles are quite consistent with the so-called tri-bi-maximal mixing pattern, but the deviation from observational results is non-negligible. However, the tri-bi-maximal mixing pattern is still useful as a leading order approximation and provides a good guideline to search for the flavor symmetry in the neutrino sector. We introduce the $S_4$ permutation symmetry as a flavor symmetry to the standard model of particle physics with additional particle contents of heavy right-handed neutrinos and scalar fields. Finally, we obtain the tri-bi-maximal mixing pattern as a mixing matrix in the lepton sector within the suggested model. To derive the required unitary mixing matrix for the neutrino sector, the double seesaw mechanism is utilized.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.765-768
• /
• 2014

본 연구에서는 비대칭 이중게이트 MOSFET의 상하단 게이트 산화막 두께 비에 대한 문턱전압 및 전도중심의 변화에 대하여 분석하고자한다. 비대칭 이중게이트 MOSFET는 상하단 게이트 산화막의 두께를 다르게 제작할 수 있어 문턱전압이하 영역에서 전류를 제어할 수 있는 요소가 증가하는 장점이 있다. 상하단 게이트 산화막 두께 비에 대한 문턱전압 및 전도중심을 분석하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였다. 이때 전하분포는 가우스분포함수를 이용하였다. 하단게이트 전압, 채널길이, 채널두께, 이온주입범위 및 분포편차를 파라미터로 하여 문턱전압 및 전도중심의 변화를 관찰한 결과, 문턱전압은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 특히 채널길이 및 채널두께의 절대값보다 비에 따라 문턱전압이 변하였으며 전도중심이 상단 게이트로 이동할 때 문턱전압은 증가하였다. 또한 분포편차보단 이온주입범위에 따라 문턱전압 및 전도중심이 크게 변화하였다.