• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.655-661
• /
• 2011

This paper presents two topologies for single-stage single-phase double-buck type PFC converters, designed to operate at high power factor, near sinusoidal input currents and adjustable output voltage. Unlike the known buck type PFC topologies, in which the output voltage is always lower than the maximum input voltage, the proposed converters can operate at output voltages higher than the ac input peak voltage. A reduced number of switches on the main path of the current are another characteristic of the two proposed topologies. To shape the input line currents, a fast and robust controller based on a sliding mode approach is proposed. This active non-linear control strategy, applied to these converters allows high quality input currents. A Proportional Integral (PI) controller is adopted to regulate the output voltage of the converters. This external voltage controller modulates the amplitude of the sinusoidal input current references. The performances of the presented rectifiers are verified with experimental results.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.109-119
• /
• 2012

For membrane structure, there are three main steps in design and construction, which are form finding, statistical load analysis, and cutting patterning. Unlike the first two stages, the step of cutting pattern involves the translation of a double-curved surface in 3D space into a 2D plane with minimal error. For economic reasons, the seam lines of generated cutting patterns rely greatly on the geodesic line. Generally, as searching regions of the seam line are plane elements in the step of shape analysis, the seam line is not a smooth curve, but an irregularly divided straight line. So, it is how we make an irregularly divided straight line a smooth curve that defines the quality of the pattern. Accordingly, in this paper, we analyzed interpolation schemes using spline, and apply these methods to cutting pattern generation on the curved surface. To generate the pattern, three types of spline functions were used, i.e., cubic spline function, B-spline, and least-square spline approximation, and simple model and the catenary-shaped membrane was adopted to examine the result of generation. The result of comparing the approximation curves by the number of elements and the number of extracted nodes of simple model revealed that the seam line for less number of extracted nodes with large number of elements were more efficient, and the least-square spline approximation provided smoother seam line than other methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.246-252
• /
• 2016

Double crown prostheses can be used in patients who have a few remaining teeth and poor periodontal condition because of secondary splinting of abutments, vertical loading, decrease of the length of lever arm due to fulcrum line located on margin of inner and outer crown. Successful results of treatments using double crown prostheses for the partially edentulous patients who have a few remaining teeth and implant overdenture using a small number of implants have been reported. In this case, there were a few remaining teeth with a very poor periodontal condition in maxilla, and there were a failed implant with severe alveolar bone resorption and shrinkage in the mandible. The main objective of this report is to introduce our case because a double crown partial denture showed satisfactory results in functional and esthetical aspects during more than one-year follow-up period.

• Communications of Mathematical Education
• /
• v.37 no.2
• /
• pp.135-157
• /
• 2023

Double scale models have been introduced in elementary mathematics textbooks under the 2015 revised mathematics curriculum. However, few studies have examined in detail how students understand or utilize such models. In this study, we analyzed how 154 sixth-grade students who had learned the division of fractions from textbooks containing double scale models understood such models. The results showed that the students tended to identify the components of the model relatively well, but had difficulties exploring the unit or the meaning of the bottom number line of a model. They also had a lot of difficulties using the double scale model to complete the computation process and explain the computation principle. Based on these findings, we discuss the implications of teaching double scale models.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.316-319
• /
• 2009

A new gerbera cultivar 'Lovely Moon' was released by the National Institute of Horticultural & Herbal Science (NIHHS) in 2008. A cross was made between 'Sever Line' and 'Angel' with yellow and semi-double flower in 2005. After investigation of the characteristics for four years (from 2005 to 2008), it was selected specially for the use of cut flowers. 'Lovely Moon' is a vigorous cultivar with yellow (RHS Y13B), yellow green center and semi-double flower. The average flower diameter is 12.7 cm, a large flower. And inner ray floret and disc diameter are 6.10 cm and 2.80 cm, respectively. It produces a large number of flowers with continuous supply of flowers and has a long peduncle height. We believe that 'Lovely Moon' has a great potential for expanding cultivated area of domestic gerbera cultivars and increasing farm income.

• IMMUNE NETWORK
• /
• v.2 no.4
• /
• pp.217-222
• /
• 2002

Background: Scid.adh is a recently developed murine thymic lymphoma cell line, which has been used as in vitro model for the study of double negative stage III thymocytes. In this study, we compared the expression profile of a number of genes and proteins, which are tightly related to T cell development and apoptosis, in thymic lymphoma cell lines, R1.1, EL-4, and Scid.adh for the developmental staging. Methods: We examined the expression of development marker genes and proteins in three lymphoma cell lines by flow cytometry and RT-PCR. In addition, the expression of apoptosis-related molecules including bcl-2, bax and Fas was also investigated. Results: As previously reported, Scid.adh cell line expressed CD8 and CD25 but not TCR ${\alpha}$ chain, while R1.1 cells expressed TCR ${\alpha}$ chain and both CD4 and CD8 transcripts. These suggest that R1.1 might be in double positive stage, and low level of CD44 expression and the absence of CD25 support this suggestion. In contrast, EL-4 cells showed high level of TCR ${\alpha}$ chain transcript, and low-level of CD4 expression, suggesting that EL-4 is in more mature stage than R1.1. Further, this suggestion was supported by the lack of mT-20 in EL-4 cells, which is expressed in the immature thymocytes, and Scid.adh and R1.1 cell lines, but not in the terminally differentiated thymocytes and peripheral T cells. Among the apoptosis-related gene, transcripts of bcl-2 gene were detected in both R1.1 and EL-4 but not in Scid.adh cells, while bax was expressed in all cell lines. Fas expression was the highest in EL-4 cells and low in Scid.adh cell line. Conclusion: R1.1 cell may represent double positive stage, and EL-4 is more differentiated cell line. In addition, Scid.adh and EL-4 cell lines are suspected to be useful for the study of function of bcl-2 family and Fas during the thymocyte development, respectively.

• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.611-621
• /
• 2009

Using the spectroscopic data secured with the Hamilton Echelle Spectrograph at Lick Observatory, we found the physical condition of the planetary Nebula NGC 6210. The spectral line profiles of the permitted and forbidden lines have been analyzed using IRAF and StarLink/Dipso. The hydrogen number densities ($N_H$) are 2,000-20,000 $cm^{-3}$, and the electron temperatures are 8,100-10,300 K based on the forbidden lines. The expansion velocities, derived from the Full Width at Half Maximum (FWHM) and the double peak of the line profiles, are in the range of 10 to $45\;kms^{-1}$. The expansion velocities imply a shell structure with an accelerated nebular gas. We also derived abundances from the permitted lines of CII, CIII, NII, NIII, OII, and OIII, which may have been formed through the fluorescence mechanism. NGC 6210 is likely to be evolved from a progenitor of more than $3M_{\bullet}$, which had been born near the Galactic plane.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.147-153
• /
• 1995

In this paper, we propose the position- and size-independent handwritten on-line Korean character recognition system using multilayer neural networks which are trained with error back-propagation learning algorithm and the features of Hanguel consonants and vowels. Starting point, end point, and three vectors from starting point to end point of each stroke of characters inputted from mouse or tablet are applied as inputs of neural networks. If double consonants and vowels are separated by single consonants and vowels, all consonants and vowels have at most four strokes. Therefore, four neural networks learn the consonants and the vowels having each number of strokes. Also, we propose the algorithm of separating the consonants and vowels and constructing a character.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.6
• /
• pp.353-360
• /
• 2019

Background: Controlled hypotension (CH) provides a better surgical environment and reduces operative time. However, there are some risks related to organ hypoperfusion. The EV1000/FloTrac system can provide continuous cardiac output monitoring without the insertion of pulmonary arterial catheter. The present study investigated the efficacy of this device in double jaw surgery under CH. Methods: We retrospectively reviewed the medical records of patients who underwent double jaw surgery between 2010 and 2015. Patients were administered conventional general anesthesia with desflurane; CH was performed with remifentanil infusion and monitored with an invasive radial arterial pressure monitor or the EV1000/FloTrac system. We allocated the patients into two groups, namely an A-line group and an EV1000 group, according to the monitoring methods used, and the study variables were compared. Results: Eighty-five patients were reviewed. The A-line group reported a higher number of failed CH (P = 0.005). A significant correlation was found between preoperative hemoglobin and intraoperative packed red blood cell transfusion (r = 0.525; P < 0.001). In the EV1000 group, the mean arterial pressure (MAP) was significantly lower 2 h after CH (P = 0.014), and the cardiac index significantly decreased 1 h after CH (P = 0.001) and 2 h after CH (P = 0.007). Moreover, venous oxygen saturation (ScVO₂) decreased significantly at both 1 h (P = 0.002) and 2 h after CH (P = 0.029); however, these values were within normal limits. Conclusion: The EV1000 group reported a lower failure rate of CH than the A-line group. However, EV1000/FloTrac monitoring did not present with any specific advantage over the conventional arterial line monitoring when CH was performed with the same protocol and same mean blood pressure. Preoperative anemia treatment will be helpful to decrease intraoperative transfusion. Furthermore, ScVO₂ monitoring did not present with sufficient benefits over the risk and cost.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2921-2929
• /
• 1998

We propose an efficient off-line electronic cash system based on the certificate issued by Certificate Authority. It satisfies all the basic requirements for electronic payment system such as cash unforgeability, cash anonymity, double spending detection, no framing, etc. Our proposed system is very computationally efficient in the sense that: (1) the number of exponentiation operation imposed on the user during withdrawal phase is much smaller than any existing off-line electronic cash schemes, (2) all the computation of user's during withdrawal phase can be performed by off-line pre-processing. So the proposed system is suitable to be implemented by smart cards in both memory and computation.