• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1204-1212
• /
• 2008

현재 서울도시철도 5,7,8호선 신호기계실에 설치되어 운영 중인 열차운행 제어 시스템 (L-CTC)는 DOS로 운용되는 컴퓨터를 사용하고 있다. DOS 기반 L-CTC는 H/W의 부품, DOS 운영 체제에서의 S/W 확보 등으로 시스템 확장과 유지보수가 불가능하게 되었다. L-CTC 노후화는 전체 시스템의 운용에 영향을 미치고 있어 시스템의 개량이 필요한 상태이다. 본 연구에서는 L-CTC 컴퓨터 및 HADAX의 기능을 결함허용시스템을 적용한 완전한 이중계로 구현함으로써 기존 이중계 시스템의 문제점을 해결하였으며, 현재 DOS 기반의 O/S로 운영중인 L-CTC 컴퓨터를 WINDOWS 기반의 O/S로 구현하여 L-CTC 컴퓨터에 제어기능을 추가함으로써 기존 LCP제어 방식을 개선하여 장비의 간소화 및 시스템 현대화를 구현하였다. 또한 기존 연동장치인 Microlok의 오류정보를 L-CTC 컴퓨터로 수신하여 운영 중 발생하는 Microlok의 오류 사항에 대하여 효율적인 대처가 가능하도록 하였다. 또한 현장 감시 기능만을 수행하는 분소 시스템에 제어 기능을 추가하여 사령과 현장 기계실 시스템의 중간 단계에 통합분소 시스템을 구축함으로써 사령제어 불가능 시, 통합분소 시스템이 현장 L-CTC 시스템을 통제하도록 구성하여 성능 향상 및 분소와 기계실의 집중화 방안을 제시하였다. 본 논문을 통해 서울도시철도 L-CTC 시스템 장비의 노후화를 대비할 수 있으며, 완전한 이중계 구성으로 시스템을 더욱 안정화 하였다. 또한, WINDOWS 기반의 O/S로 L-CTC 컴퓨터를 구성하여 장비의 간소화 및 현대화가 가능해 졌으며, 분소 및 기계실의 집중화 방안을 제시하여 유지 보수 기능을 향상시켰다.

• Advances in nano research
• /
• 제7권3호
• /
• pp.209-221
• /
• 2019

Graphene, with impressive electronic properties, have high potential in the microelectronic field. However, graphene itself is a zero bandgap material which is not suitable for digital logic gates and its application. Thus, much focus is on graphene nanoribbons (GNRs) that are narrow strips of graphene. During GNRs fabrication process, the occurrence of defects that ultimately change electronic properties of graphene is difficult to avoid. The modelling of GNRs with defects is crucial to study the non-idealities effects. In this work, nearest-neighbor tight-binding (TB) model for GNRs is presented with three main simplifying assumptions. They are utilization of basis function, Hamiltonian operator discretization and plane wave approximation. Two major edges of GNRs, armchair-edged GNRs (AGNRs) and zigzag-edged GNRs (ZGNRs) are explored. With single vacancy (SV) defects, the components within the Hamiltonian operator are transformed due to the disappearance of tight-binding energies around the missing carbon atoms in GNRs. The size of the lattices namely width and length are varied and studied. Non-equilibrium Green's function (NEGF) formalism is employed to obtain the electronics structure namely band structure and density of states (DOS) and all simulation is implemented in MATLAB. The band structure and DOS plot are then compared between pristine and defected GNRs under varying length and width of GNRs. It is revealed that there are clear distinctions between band structure, numerical DOS and Green's function DOS of pristine and defective GNRs.

• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.43-51
• /
• 2023

Purpose: This study aimed to assess texture analysis(TA) of cone-beam computed tomography (CBCT) images as a quantitative tool for the differential diagnosis of odontogenic and non-odontogenic maxillary sinusitis(OS and NOS, respectively). Materials and Methods: CBCT images of 40 patients diagnosed with OS (N=20) and NOS (N=20) were evaluated. The gray level co-occurrence (GLCM) matrix parameters, and gray level run length matrix texture (GLRLM) parameters were extracted using manually placed regions of interest on lesion images. Seven texture parameters were calculated using GLCM and 4 parameters using GLRLM. The Mann-Whitney test was used for comparisons between the groups, and the Levene test was performed to confirm the homogeneity of variance (α=5%). Results: The results showed statistically significant differences(P<0.05) between the OS and NOS patients regarding 3 TA parameters. NOS patients presented higher values for contrast, while OS patients presented higher values for correlation and inverse difference moment. Greater textural homogeneity was observed in the OS patients than in the NOS patients, with statistically significant differences in standard deviations between the groups for correlation, sum of squares, sum of entropy, and entropy. Conclusion: TA enabled quantitative differentiation between OS and NOS on CBCT images by using the parameters of contrast, correlation, and inverse difference moment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권3호
• /
• pp.153-161
• /
• 2011

In this work, we report the physics-based SPICE model of amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) and demonstrate the SPICE simulation of amorphous InGaZnO (a-IGZO) TFT inverter by using Verilog-A. As key physical parameter, subgap density-of-states (DOS) is extracted and used for calculating the electric potential, carrier density, and mobility along the depth direction of active thin-film. It is confirmed that the proposed DOS-based SPICE model can successfully reproduce the voltage transfer characteristic of a-IGZO inverter as well as the measured I-V characteristics of a-IGZO TFTs within the average error of 6% at $V_{DD}$=20 V.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.709-715
• /
• 2006

The effects of thermal cycle condition and applied stress on the intergranular corrosion in austenitic 316 type stainless steels were investigated. Specimens were solution-treated at 1100$^{\circ}C$ for one hour and then sensitized in the temperature range of $500{\sim}800^{\circ}C$ by holding $2{\sim}300s$ with a various applied stresses of $0{\sim}8kg/mm^2$. Degree of sensitization. DOS %, was measured through polarization curve by electrochemical DL-EPR test. Microstructural observations were also conducted DOS % increased with an increase of sensitization temperature and/or holding time. Increase of applied stress resulted in increase of DOS % and more corroded surface because of acceleration of intergranular corrosion and fine grain size due to the stress. Cr depleted zone near grain boundary was observed. The amount of depletion was profounded with an increase of sensitization temperature, holding time and applied stress. $M_{23}C_6$ carbides were precipitated discontinuously at grain boundary. However, its amount was relatively small in the thermal cycle condition of 800$^{\circ}C$, 300sec and 4kg/mm$^2$.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.373-380
• /
• 1997

In order to implement the real-time operating systems for robot controller, this paper proposes a systematic method for implementing the real-time kernel under the DOS environment. So far, we designed the robot control software and its own operating system simultaneously. Though robot operating systems have simple structure, it allows the developer to have a surplus time and effort to implement complete robot systems. In addition to this, in most cases of this type, operating systems does not support multitasking function, thus, low level hardware interrupts are used for real-time execution. Subsequently, some kinds of real-time tasks are hard to implement under this environment. Nowadays, the operating systems for robot controller requires multitasking functions, intertask communication and task synchronization mechanism, and rigorous real-time responsiveness. Thus, we propose an effective and low costs real-time systems for robot controller satisfying the various real-time characteristics. The proposed real-time systems are verified through real implementation.

• Carbon letters
• /
• 제16권2호
• /
• pp.116-120
• /
• 2015

We investigated the adsorption of Na on graphene and graphene oxide, which are used as anode materials in sodium ion batteries, using density functional theory. The adsorption energy for Na on graphene was -0.507 eV at the hollow sites, implying that adsorption was favorable. In the case of graphene oxide, Na atoms were separately adsorbed on the epoxide and hydroxyl functional groups. The adsorption of Na on graphene oxide-epoxide (adsorption energy of -1.024 eV) was found to be stronger than the adsorption of Na on pristine graphene. However, the adsorption of Na on graphene oxide-hydroxyl resulted in the generation of NaOH as a by-product. Using density of states (DOS) calculations, we found that the DOS of the Na-adsorbed graphene was shifted down more than that of the Na-adsorbed graphene oxide-epoxide. In addition, the intensity of the DOS around the Fermi level for the Na-adsorbed graphene was higher than that for the Na-adsorbed graphene oxide-epoxide.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
• /
• pp.297-300
• /
• 2017

본 연구는 기술수용모델(Technology Acceptance Model)을 기반으로 <클림트 인사이드(2017)>전시에서 사용된 <스토클렛 저택의 장식벽화(Stoclet Frieze)> VR 앱에 대한 인지된 유용성(이하 PU)과 인지된 이용용이성(이하 PEOU)의 평가에 초점을 맞추었다. VR 앱의 학습적합성(SFL)이 감상적합성(SFA)보다 높게 평가된 PU의 경우, 학습유용성(UFL)과 감상유용성(UFA)의 모든 요인이 만족도(DOS)에 긍정적인 영향을 미침으로써, 전시환경에서의 VR 앱의 학습에 대한 내적 동기 부여 및 감상 지원에 대한 잠재력이 확인되었다. 또한 PEOU의 모든 요인들은 DOS뿐만 아니라 DOI와도 유의미한 상관관계를 가졌다. 본 연구를 통해 TAM의 PU와 PEOU의 ATUA(DOS 및 DOI) 및 BITUA(ITRA(1) 및 ITRA(2))에 대한 영향력이 검증됨에 따라, 두 변수는 사용자의 VR 앱에 대한 기술 수용에 대한 예측을 가능케 했으며, 결론적으로 예술작품 원작을 재매개한 VR 앱에 대한 평가모델로써 TAM의 적합성이 입증되었다.

• Journal of Communications and Networks
• /
• 제15권1호
• /
• pp.31-37
• /
• 2013

Mobile ad hoc networks (MANET) refers to a network designed for special applications for which it is difficult to use a backbone network. In MANETs, applications are mostly involved with sensitive and secret information. Since MANET assumes a trusted environment for routing, security is a major issue. In this paper we analyze the vulnerabilities of a pro-active routing protocol called optimized link state routing (OLSR) against a specific type of denial-of-service (DOS) attack called node isolation attack. Analyzing the attack, we propose a mechanism called enhanced OLSR (EOLSR) protocol which is a trust based technique to secure the OLSR nodes against the attack. Our technique is capable of finding whether a node is advertising correct topology information or not by verifying its Hello packets, thus detecting node isolation attacks. The experiment results show that our protocol is able to achieve routing security with 45% increase in packet delivery ratio and 44% reduction in packet loss rate when compared to standard OLSR under node isolation attack. Our technique is light weight because it doesn't involve high computational complexity for securing the network.

• 분석과학
• /
• 제13권4호
• /
• pp.428-432
• /
• 2000

새로운 캘릭스[4]크라운 화합물을 이온 선택성 물질로 사용하고 지지체로 PVC(polyvinyl chloride), 가소제로 DOS(dioctyl sebacate)를 사용하여 이온선택성 막전극을 제작 하였다. 제작한 막전극을 지시전극으로 사용하여 알칼리, 알칼리토금속 이온에 대하여 각각의 감응전위를 측정한 결과, pH7.20 Tris buffer에서 $10^{-5}-10^{-1}M$ 농도의 변화에 따른 $Cs^+$이온의 감응전위가 이론적인 Nernst식 기울기에 가까운 52.3 mV/decade로 직선성이 잘 성립하는 감응전위를 나타내었다. $Cs^+$이온 농도변화에 따른 막의 감응시간은 $t_{90%}$=10sec이었고, 막의 사용기간은 2개월 정도이다.