• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.381-384
• /
• 2002

The purpose of this study is to construct an Environment Database Management System (EDMS) for the Saemangeum watershed based on the linkage of Water Quality Model, i.e. QUALKO and WASP model, and GIS database to estimate water quality effectively in this area. There are two major river systems on this study area, the Mangyeong and the Dongjin rivers. Input data are automatically generated through the calculation of the pollutant loading and inflow concentration from the point and non-point sources. The developed system is composed of three different phases, such as pre-process, model performance and post-process. The Model performance is supported by the database at pre-process phase and model performance results were shown in the graphs and attribution data at post-process phase. The measured data from the Mangyeong and the Dongjin rivers are used to evaluate the applicability of EDMS. The EDMS shows higher reliability, and it is expected to contribute to the effective management and improvement of water quality modeling in the Saemangeum watershed since the system reduces complications of using a model in DOS operating environment and increases the accuracy of water quality analysis.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.110-113
• /
• 2011

We have grown a Nb/Gd bilayer on a$SiO_2$/Si substrate by using a DC magnetron sputtering system, which was fabricated in situ with silicon stencil masks. In order to investigate proximity effect of the Nb/Gd bilayer, we used a planar tunnel junction with an AlOx tunnel barrier by oxidizing the Al ground electrode at the bottom. A $Co_{60}Fe_{40}$ backing of Al was deposited so as to reduce the superconductivity of the Al, ensuring a normal counterelectrode. With a 50-nm-thick Nb layer, we have measured dI/dV (dynamic conductance) by varying the thickness of Gd, which can reveal the density of states (DOS) of the Nb/Gd bilayer as a function of the Gd thickness resulting from the proximity effect of a superconductor/ferromagnet bilayer (S/F). The SF proximity effect in Nb/Gd will be discussed in comparison to our previous results of the CoFe/Nb, Ni/Nb and CuNi/Nb proximity effect; Gd is expected to show different effects since Gd has f-electrons, while CoFe, Ni, and CuNi have only d-electrons. Our studies will focus on the triplet correlation in a superconducting pair.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.25-30
• /
• 2008

This paper presents on research findings of how Visual C++ program can be used to generate codes capable of performing ramjet engine simulation an arbitrary ramjet model will be considered for which generated output values will be compared with those from a commercial program GASTURB 9 Several governing thermodynamic equations will first be discussed in order that we understand the fundamental idea behind values printed out on the GUI. The program is designed that it generates its station input value. Similar results were realized compared to those produced by gasturb 9.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.819-826
• /
• 2020

The method of the Laplace transform has been used to obtain an analytical solution of the three-dimensional steady state advection diffusion equation for the airborne radionuclide release from any nuclear installation such as the power reactor in an area source. The present treatment takes into account the removal of the pollutants through the nuclear reaction. We assume that the pollutants are emitted as a constant rate from the area source. This physical consideration is achieved by assuming that the vertical eddy diffusivity coefficient should be a constant. The prevailing wind speed is a constant in 𝑥- direction and a linear function of the vertical height z. The present model calculations are compared with the other models and the available data of the atmospheric dispersion experiments that were carried out in the nuclear power plant of Angra dos Reis (Brazil). The results show that the present treatment performs well as the analytical dispersion model and there is a good agreement between the values computed by our model and the observed data.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.175-182
• /
• 2008

This study investigates the optimal conditions for electrogenerated hydrogen peroxide production and the application of the electro-Fenton process using DSA electrodes. The influences of parameters for the hydrogen peroxide generation such as electrode materials, electrolyte concentration, current, pH, air flow rate and electrode distance were investigated using a laboratory scale batch reactor. The relative performance for hydrogen peroxide generation of each of the six electrodes is : Ru-Sn-Ti > Ru-Sn-Sb > Ru > Ir > Pt > Sn-Sb. Optimum NaCl dosage, current and air flow rate were 2.0 g/l, 12.5 A and 2 l/min, respectively. When the pH is low, hydrogen peroxide concentration was high. Electrode distance dos not effect to a hydrogen peroxide generation. A complete color removal was obtained for RhB (200 mg/l) at the 8 min mark of the electro-Fenton process under optimum operation conditions of $Fe^{2+}$ 0.105 g/l and 5.0 A. The electro-Fenton process increased initial reaction and decreased final reaction time. However the effect was not high.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1208-1211
• /
• 2008

We study the amorphous In-Ga-Zn-O thin-film transistors (TFTs) properties under monochromatic illumination ($\lambda=420nm$) with different intensity. TFT off-state drain current ($I_{DS_off}$) was found to increase with the light intensity while field effect mobility ($\mu_{eff}$) is almost unchanged; only small change was observed for sub-threshold swing (S). Due to photo-generated charge trapping, a negative threshold voltage ($V_{th}$) shift is also observed. The photofield-effect analysis suggests a highly efficient UV photocurrent conversion in a-IGZO TFT. Finally, a-IGZO mid-gap density-of-states (DOS) was extracted and is more than an order lower than reported value for a-Si:H, which can explain a good switching properties of the a-IGZO TFTs.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.107-116
• /
• 1994

Choropleth map is a type of thematic maps in which areal units are shaded with a color or pattern that symbolizes some characteristic of the mapped unit. CMS was first developed to produce choropleth maps on ordinary microcomputer environments in 1988. Since then there have been significant technological developments and enhancements in user environments, which have affected the field of choropleth mapping systems posi¬tively. A new version of CMS was developed in accordance with these changes. CMS II requires an IBM PC, or compatible, with the minimum 640KB memory and VGA graphic board. It supports HP laser jet printers to output a high resolution map. The program can use Hangul letters for main menu, map title, and legend. And dBase file format (DEW) was implemented to exchange attribute files effectively.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.55-66
• /
• 1994

The aim of this study is to propose the reasonable method of evaluation on the value of the life-time household work. for homemaker claim her share in the matrimonial property in relation to her life-time household work and to provide the basic data to measuring proper compensation for homemaker and calculating of the donation tax and inheritance tax amount. Tom compare the difference of the method of evaluation on the value of the life-time household work is evaluted by three methods: the model of the life-time household work which is reflected major variables in the FLC frame work marital stage, total marital period. The major findings are as follows: 1) Among the three evaluation me？ The method of Total marital period is evaluatied the lowest value of the life-time household work. 2) The evaluation method of marital stage is more resonable method than the method of total marital period habe a convenience of evaluation but it dos'nt reflected major variables which influence the value of life-time household work. 3) the most resonable method of evaluation on the value of the life-time household work is revealed the model of the life-time household work which is reflected major variables in the FLC frame work the age of first and last offspring marital period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1066-1074
• /
• 2004

With a diode corona charger, which is a component of ELPI(Electrical Low Pressure Impactor), aerosol particles are charged to make electrical detection possible before they are collected by the impactor. We designed and evaluated two cylindrical corona chargers, each of which had a central corona needle electrode. For the performance evaluation of each corona charger the polydisperse dioctyl sebacate(DOS) particles, with diameters of 0.1∼0.8 $\mu$m and NaCl particles, smaller than 0.1$\mu$m, were used. The particles were then led through an electrostatic classifier (TSI model 3081) to classify monodisperse aerosol with minimal size deviation. After evaluating the wall loss of the particles in the corona charger, we measured the product of penetration and number of charges, Pㆍn, to evaluate the corona charger efficiency at high positive voltages of 4, 5, 6 kV.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.