• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1178-1191
• /
• 2014

The fault-tolerance routing problem is one of the most important issues in the application of the Internet of Things, and has been attracting growing research interests. In order to maintain the communication paths from source sensors to the macronodes, we present a hybrid routing scheme and model, in which alternate paths are created once the previous routing is broken. Then, we propose an improved efficient and intelligent fault-tolerance algorithm (IEIFTA) to provide the fast routing recovery and reconstruct the network topology for path failure in the Internet of Things. In the IEIFTA, mutation direction of the particle is determined by multi-swarm evolution equation, and its diversity is improved by the immune mechanism, which can improve the ability of global search and improve the converging rate of the algorithm. The simulation results indicate that the IEIFTA-based fault-tolerance algorithm outperforms the EARQ algorithm and the SPSOA algorithm due to its ability of fast routing recovery mechanism and prolonging the lifetime of the Internet of Things.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1494-1503
• /
• 2016

Power quality promotion has received increasing attention because of the wide use of semiconductor devices in recent decades. Reactive power regulation is crucial to ensuring the stable operation of power systems. In this study, a continuous reactive power controller, which is referred to as a parallel-connected magnetic energy recovery switch (MERS), is developed to regulate voltage or power factor in power grids. First, the operating principle is introduced, and a mathematical model is built. Second, a new control method for restraining current harmonics and the peak voltages of capacitors is presented. Using the proposed method, the MERS shows a wide range in terms of reactive power compensation. Finally, the performance of the proposed controller is demonstrated through computer simulations and experiments. Unlike STATCOMs, the proposed controller entails low losses, adopts a small dc capacitor, and offers ease of use.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1448-1457
• /
• 2018

Many researchers devote themselves to develop model-predictive direct power control (MPDPC) so as to accelerate the response speed of the grid-connected systems, but they are troubled its large computing amount. On the basis of MPDPC, dual MPDPC (DMPDPC) is presented in this paper. The proposed algorithm divides the conventional MPDPC into two steps. In the first step, the optimal sector is obtained, which contains the optimal switching state in three-level converters. In the second step, the optimal switching state in the selected sector is searched to trace reference active and reactive power and balance neutral point voltage. Simulation and experiment results show that the proposed algorithm not only decreases the computational amount remarkably but also improves the steady-state performance. The dynamic response of the DMPDPC is as fast as that of the MPDPC.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.445-455
• /
• 2018

A novel algorithm is proposed to regulate the neutral point potential in neutral point clamped three-level inverters. Oscillations of the neutral point potential and an unbalanced dc-link voltage cause distortions of the output voltage. Large capacitors, which make the application costly and bulky, are needed to eliminate oscillations. Thus, the algorithm proposed in this paper utilizes the finite-control-set model predictive control and the multistage medium vector to solve these issues. The proposed strategy consists of a two-step prediction and a cost function to evaluate the selected multistage medium vector. Unlike the virtual vector method, the multistage medium vector is a mixture of the virtual vector and the original vector. In addition, its amplitude is variable. The neutral point current generated by it can be used to adjust the neutral point potential. When compared with the virtual vector method, the multistage medium vector contributes to decreasing the regulation time when the modulation index is high. The vectors are rearranged to cope with the variable switching frequency of the model predictive control. Simulation and experimental results verify the validity of the proposed strategy.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3085-3094
• /
• 2022

The design concept of a Small High-flux Multipurpose LBE(Lead Bismuth Eutectic) cooled Fast Reactor (SHMLFR) was proposed in the paper. The primary cooling system of the reactor is forced circulation, and the fuel element form is arc-plate loaded high enrichment MOX fuel. The core is cylindrical with a flux trap set in the center of the core, which can be used as an irradiation channel. According to the requirements of the core physical design, a series of physical design criteria and constraints were given, and the steady and transient parameters of the reactor were calculated and analyzed. Regarding the thermal and hydraulic phenomena of the reactor, a simplified model was used to conduct a preliminary analysis of the fuel plates at special positions, and the temperature field distribution of the fuel plate with the highest power density under different coolant flow rates was simulated. The results show that the various parameters of SHMLFR meet the requirements and design criteria of the physical design of the core and the thermal design of the reactor. This implies that the conceptual design of SHMLFR is feasible.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1030-1036
• /
• 2022

A high detection efficiency thermal neutron detector based on the ⁶LiF/ZnS(Ag) scintillation screens, wavelength-shifting fibers (WLSF) and Silicon photomultiplier (SiPM) readout is under development at China Spallation Neutron Source (CSNS) for the Engineering Material Diffractometer (EMD).A prototype with a sensitive volume of 180mm×192mm has been built. Signals from SiPMs are processed by the self-design Application Specific Integrated Circuit (ASIC). The performances of this detector prototype are as follows: neutron detection efficiency could reach 50.5% at 1 Å, position resolution of 3, the dark count rate <0.1Hz, the maximum count rate >200KHz. Such detector prototype could be an elementary unit for applications in the EMD detector arrays.

• 원예과학기술지
• /
• 제32권2호
• /
• pp.227-234
• /
• 2014

The responses to chilling temperature of 12 Korean cucumber varieties was compared to those of two U.S.A. (previously determined cold tolerant NC76 and 'Chipper'), and Chinese and Japanese germplasms. Seedlings of each entry were exposed to $4^{\circ}C$ (Experiment 1) and $1^{\circ}C$ (Experiments 2 and 3) at the first-true leaf stage for eight and nine hours, respectively, under 80% relative humidity (RH) and $149{\mu}moles{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux (PPF). The chilling response [damage rating (DR)] of each accession was based on visual ratings (1 to 5) after treatment, where 1 = no damage, 2 = slight, 3 = moderate, 4 = advanced, and 5 = severe damage. Predictably the cumulative average DR of chilling tolerant line NC76 and 'Chipper' after chilling w as 1 and 1.1, respectively. Korean 'Nacdongchungjang' was most sensitive to chilling temperatures [DR = 2.3] when compared to the other entries examined. The sensitivity to chilling of 'Nacdongchungjang' was followed by Chinese 'Dongguan' [DR = 1.7]. In contrast, 'Saeronchungjang' (DR = 1) and 'Janghyungnachap' (DR = 1) were the most chilling tolerant of the Korean accessions examined and equivalent to the response of line NC76 and 'Chipper'. Nevertheless, chloroplast type genotyping of these accessions with known chilling-linked sdCAPS genomic markers revealed genotypic differences between chilling tolerant lines (NC76 and 'Chipper') and all Korean lines examined.

• Advances in nano research
• /
• 제15권1호
• /
• pp.49-57
• /
• 2023

As composite materials are used in many applications, the modern world looks forward to significant progress. An overview of the application of composite fiber materials in sports equipment is provided in this article, focusing primarily on the advantages of these materials when applied to sports equipment, as well as an Analysis of the influence of sports equipment of fiber-reinforced composite material on social sports development. The present study investigated surface morphology and physical and mechanical properties of S-glass fiber epoxy composites containing Al₂O₃ nanofillers (for example, 1 wt%, 2 wt%, 3 wt%, 4 wt%). A mechanical stirrer and ultrasonication combined the Al₂O₃ nanofiller with the matrix in varying amounts. A compression molding method was used to produce sheet composites. A first physical observation is well done, which confirms that nanoparticles are deposited on the fiber, and adhesive bonds are formed. Al₂O₃ nanofiller crystalline structure was investigated by X-ray diffraction, and its surface morphology was examined by scanning electron microscope (SEM). In the experimental test, nanofiller content was added at a rate of 1, 2, and 3% by weight, which caused a gradual decrease in void fraction by 2.851, 2.533, and 1.724%, respectively, an increase from 2.7%. The atomic bonding mechanism shows molecular bonding between nanoparticles and fibers. At temperatures between 60 ℃ and 380 ℃, Thermogravimetric Analysis (TGA) analysis shows that NPs deposition improves the thermal properties of the fibers and causes negligible weight reduction (percentage). Thermal stability of the composites was therefore presented up to 380 ℃. The Fourier Transform Infrared Spectrometer (FTIR) spectrum confirms that nanoparticles have been deposited successfully on the fiber.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2799-2805
• /
• 2024

Energy-resolved neutron imaging is an effective way to investigate the internal structure and residual stress of materials. Different sample sizes have varying requirements for the detector's imaging field of view (FOV) and spatial resolution. Therefore, a dual-mode energy-resolved neutron imaging detector was developed, which mainly consisted of a neutron scintillator screen, a mirror, imaging lenses, and a time-stamping optical fast camera. This detector could operate in a large FOV mode or a high spatial resolution mode. To evaluate the performance of the detector, the neutron wavelength spectra and the multiple spatial resolution tests were conducted at CSNS. The results demonstrated that the detector accurately measured the neutron wavelength spectra selected by a bandwidth chopper. The best spatial resolution was about 20 ㎛ in high spatial resolution mode after event reconstruction, and a FOV of 45.0 mm × 45.0 mm was obtained in large FOV mode. The feasibility was validated to change the spatial resolution and FOV by replacing the scintillator screen and adjusting the lens magnification.

• 한국항만경제학회지
• /
• 제40권1호
• /
• pp.87-118
• /
• 2024

국내 운송을 담당하는 연안항들은 국가와 도시의 발전에 필수적인 역할을 하고 있다. 항만 효율성은 항만 경쟁력을 확보하기 위한 중요한 요소로, 이에 대한 연구는 기존 문헌에서 지속적으로 진행되었다. 중국의 경우 주로 지방의 항만 클러스터에 대한 연구에 초점을 맞추고 있는데, 미시적 관점에서만 접근하고 있으며, 최신 자료도 부재한 상황이다. 따라서 본 연구에서는 최신 자료를 활용하여 중국 상위 17개 연안항의 운영 효율성을 종합적으로 분석하고자 한다. 본 연구에서는 컨테이너 처리량을 산출변수로 선정하고, 크게 토지, 자본, 노동, 인프라에 속하는 13개 지표로부터 PCA(Principal Component Analysis) 분석을 통해 4개의 투입변수를 최종 선정하였다.그런 다음 17개 항구의 운영 효율성을 DEA (데이터 포위 분석)로 분석했습니다. 분석 결과, 상하이, 닝보-저우산, 광저우, 샤먼, 둥관의 5개 항만이 효율적인 반면, 나머지 12개의 항만은 상대적으로 비효율적인 것으로 나타났다. 본 연구는 중국의 연안항을 보다 거시적 관점에서 비교·분석한 것으로 이를 통해 상대적 비교가 가능하며, 향후 항만의 발전 전략 및 정책 수립을 위한 기초자료로 활용할 수 있을 것이다.