• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.81-90
• /
• 2016

Research and development activities have been actively conducted at universities, research institutions and research laboratories which belong to corporations. Because of blooming research and development activities in various fields, safety accidents in the laboratories happen consistently. The government office established Act on the establishment of safe laboratory environment to decrease safety accident rates and make environment of laboratories better, and it is effective slowly. However, in the case of laboratory safety management of the laboratory where various research and development activities are carried out. So it is difficult to closely monitor them. Even though safety inspections and periodic inspections is regularly conducted, these are focused on facilities and environment. According to a study of Dea-deok science town safety council, accidents in laboratories of 73% have arisen out of careless actions. Therefore, it is important for researchers to know to potential harmful factors in research. there is necessary to make a system to prevent laboratory accidents. The purpose of this study is that the researchers discovered potential hazard factors in laboratories. For that, foreign laboratory safety management systems has applied to domestic laboratories. Four laboratories in targeted institution has been selected to apply the appropriate personal protection equipments, job safety assessment and standard operating procedures. And I found the limitations of the process according to the excavations harmful factors in the research process. To overcome these limitations, Suggest a laboratory safety management system. This study discovered current laboratory safety system limitations and provides alternatives so that effective safety management can be achieved.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.763-772
• /
• 2019

High-resolution satellites capable of observing the Earth periodically enhance applicability of remote sensing in the field of national disaster management from national disaster pre-monitoring to rapid recovery planning. The National Disaster Management Research Institute (NDMI) has been developed various satellite-based disaster management technologies and applied to disaster site operations related to typhoons and storms, droughts, heavy snowfall, ground displacement, heat wave, and heavy rainfall. Although the limitation of timely imaging of satellite is a challenging issue in emergent disaster situation, it can be solved through international cooperation to cope with global disasters led by domestic and international space development agencies and disaster organizations. This article of special issue deals with the scientific disaster management technologies using remote sensing and advanced equipments of NDMI in order to detect and monitor national disasters occurred by global abnormal climate change around the Korean Peninsula: satellite-based disaster monitoring technologies which can detect and monitor disaster in early stage and advanced investigation equipments which can collect high-quality geo-information data at disaster site.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.81-87
• /
• 2012

This study is enabled our country to compare and analyze Korea's and Japan's marina development related fishing villages in the sea ports, sea port law's systematical research, approved permissions, and operation related ordinance enactments. Henceforth, the results of the research regarding the fisherina development model appropriate for domestic circumstances are as follows. First, the fisherina must be developed in a way to create a new source of income in the fishing villages. The initial steps must be taken in improving the fishing industry and revitalizing the marine leisure sports. Second, there must be a development of a system to reduce its development costs. Third, the existing sea port's unused equipments must be developed in a remodeled form.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.213-220
• /
• 2006

Plant construction industry is a high value-adding industry because it is complex industry comprising engineering, procurements of equipments and construction. So, Revenue increase in overseas plant projects would boost up not only domestic construction industry but also growth of national economy. Recently, overseas plant-construction market is expanding dramatically. For instant, Middle-east countries are constantly increasing their orders for the construction of petro-chemical plants stimulated by sky-rocketing oil prices. The purpose of this research is to develop management techniques for plant projects such as work break-down structure, knowledge management system, logistics & procurement system, and risk assessment tools. We believe our research would contribute to the competion of Korean engineeing companies and contractors in overseas plant-construction market.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.40-49
• /
• 1997

What's the direction of INTERIOR ARCHITECTURAL DESIGN in 21 Century High Tech\ulcorner The purpose of this research is to show not only practical use of Computer Graphic(CG) as simple tool function, but offering conversation with computer and other ways of method. When we consider poor CG market, investment on the research of VR(Virtual Reality) is the most urgent. The investment on VR will solve various problems. Firstly. It will solve the problems drived from Interior design process by making spatial images like reality. Secondly, It will solve high wages and financial difficulties caused by raise cost funds. Thirdly, It prevents in a road from foreign company that will bring enormous program, caused by opening the domestic market. Also, It help interior designer check in advance the problems in constructure through showing him a supposed imagination including the system and location of equipments. But it is reality that even ordinary American can't offer VR(Virtual Reality) System. We should have noted that it is normal to spend 10 billion won for such presentation as Model House in the large corporation. We must acknowledge that it is such a waist of money nationally. Therefore, investment on CG & VR System is essential in order to save cost more effective presentation & interior design. We will see great result within a year. As we can see, there is huge area we have make develop. One of them is specific technical plan on VR System and study of flow chart. We close with simple methodological way to use VR System and will study Computer System. Which is fitting to CG that we have to solve the link of hardware and software on VR System\ulcorner We know from the cases in other countries that continuous research on this subject has great value for Interior Architectural Design and its effective use. When we try hard not only for methodological use but practical use, the purpose of CG and VR System will be a factor to contribute on this subject for better Interior design & presentation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.63-70
• /
• 2002

The main subject to become a hub pen is automation The automated container terminal has already operated in advanced pons and it bas been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the moat optimal method of equipment operation in order to minimize loading time using each three types of effective AT operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real tine. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2983-2988
• /
• 2010

The train control system used in Gyeongbu-line is classified in ATC, IXL and CTC. Domestic railway signaling systems are being developed by electrification. In these systems the electrification of interlocking reaches 57% and the safety equipments of railway crossings in trackside devices have completed their development into an integrated system. Block systems of all the existing sections have not yet electrified and integrated so that they need a number of complement in terms of construction and maintenance. For ABS currently used in existing domestic lines, and LEU being installed in Gyeongbu and Honam lines, although a train is controlled by the signaling information of the same train in the same location, the system is separately installed so that the same information is separately divided and transmitted at the each distinct system. Therefore, in the conventional ABS and LEU, there are a lot of duplicate installed compartments such as lamp detection and a power supply unit. Hence, we have a lot of problems: for maintenance, a lot of manpower and costs need to be invested and the overall manufacturing costs get higher, as well as the construction costs by duplicate. Therefore, this paper suggest design to develop an integrated electronic Block Control Unit by the integration of the currently used ABS, and communication and electronic technology. We are to monitor and manage the block systems in the corresponding station by integrating. And we are to transmit information together with LEU, which is an ATS wayside transmitter.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.289-297
• /
• 2011

Chirp sub-bottom profilers (SBP) data are comparatively higher-resolution data than other seismic data and it's raw signal can be used as a final section after conducting basic filtering. However, Chirp SBP signal has possibility to include various noise in high-frequency band and to provide the distorted image for the complex geological structure in time domain. This study aims at the goal to establish the workflow of Chirp SBP data processing for enhanced image and to analyze the proper parameters for the domestic continental shelf. After pre-processing, we include the dynamic S/N filtering to eliminate the high-frequency component noise, the dip scan stack to enhance the continuity of reflection events and finally the post-stack depth migration to correct the distorted structure on the time domain sections. We demonstrated our workflow on the data acquired by domestically widely used equipments and then we could obtain the improved seismic sections of depth domain. This workflow seems to provide the proper seismic section to interpretation when applied to data processing of Chirp SBP that are largely used for domestic acquisition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.22-29
• /
• 2014

Many government agencies have used domestic deacidification equipments to stabilize archives; however, no agency has verified archives' current preservative status. We studied the Nara National Archives' documents that had treated by mass deacidification process from 2001 to 2012, in order to examine the documents' preservative status and how efficient the mass deacidification has been. Approximately 1% of total 112,970 Nara National Archives' documents treated by mass deacidification were randomly selected and evaluated on their current measure of acidity and color change. Regardless of the kinds of document material, a wide range of pH level was found. Especially those documents that were treated by mass deacidification equipment after 2006 showed acidic conditions that were less than pH 6.8 level. Those documents were probably not treated properly by deacidifying chemical because of tightly packing style. The current measures of acidity and color records will be useful as a reference for future evaluations of further decay of the documents. It was the first study to evaluate acidity and color conditions of Nara National Archives' documents treated by mass deacidification equipment. We concluded that when using mass deacidification equipment, archives should not be loaded tightly in order for them to be fully in contact with deacidifying chemical.

• Proceedings of the Korean Printing Society Conference
• /
• 2007.11a
• /
• pp.13-28
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print 200lpi${\sim}$300lpi as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.