• Mass Spectrometry Letters
• /
• v.3 no.2
• /
• pp.54-57
• /
• 2012

Mass spectrometric analysis was carried out using multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) for the precise and accurate determination of the isotope ratios of ultratrace levels of uranium dissolved in 3% $HNO_3$. We used the certified reference material (CRM) 112-A at a trace level of 100 pg/mL for the uranium isotopic measurement. Multiple collectors were utilized for the simultaneous measurement of uranium isotopes to reduce the signal uncertainty due to variations in the ion beam intensity over time. Mass bias correction was applied to the measured U isotopes to improve the precision and accuracy. Furthermore, elemental standard solution with certified values of platinum, iridium, gold, and thallium dissolved in 3% $HNO_3$ were analyzed to investigate the formation rates of the polyatomic ions of $Ir^{40}$ $Ar^+$, $Pt^{40}$ $Ar^+$, $Tl^{40}$ $Ar^+$, $Au^{40}$ $Ar^+$ for the concentration range of 50-400 pg/mL. Those polyatomic ions have mass-to-charge ratios in the 230-245 m/z region that it would contribute to the increase of background intensity of uranium, thorium, plutonium, and americium isotopes. The effect of the polyatomic ion interference on uranium isotope measurement has been estimated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.75-82
• /
• 2021

Low-temperature combustion (LTC) strategies, such as HCCI (Homogeneous Charge Compression Ignition), PCCI (Premixed Charge Compression Ignition), and RCCI (Reactivity Controlled Compression Ignition), have been developed to effectively reduce NOx and PM while increasing the thermal efficiency of diesel engines. Through numerical analysis, this study examined the effects of the injection timing and two-stage injection ratio of diesel fuel, a highly reactive fuel, on the performance and exhaust gas of RCCI engines using gasoline as the low reactive fuel and diesel as the highly reactive fuel. In the case of two-stage injection, combustion slows down if the first injection timing is too advanced. The combustion temperature decreases, resulting in lower combustion performance and an increase in HC and CO. The injection timing of approximately -60°ATDC is considered the optimal injection timing considering the combustion performance, exhaust gas, and maximum pressure rise rate. When the second injection timing was changed during the two-stage injection, considering the combustion performance, exhaust gas, and the maximum pressure increase rate, it was judged to be optimal around -30°ATDC. In the case of two-stage injection, the optimal result was obtained when the first injection amount was set to approximately 60%. Finally, a two-stage injection rather than a single injection was considered more effective on the combustion performance and exhaust gas.

• Clean Technology
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2005

In these studies, semibatch emulsion copolymerization of n-butyl acrylate (n-BA) as adhesive component and methyl metacrylate (MMA) as coagulant component was carried out in order to investigate the role of surfactant in aqueous phase for polymer cement. It was found that the particle size and concentration of final polymer are affected by surfactant type used. The effect of nonionic surfactants was shown in the decrease of polymer emulsion concentration and small emulsion particle in order of LE-50, NP-50 > CE-50, Tween 20 > TX-405 > Brij 35. In LE and NP (n=7-50) as nonionic surfactant, it could be obtained the stable polymer emulsion of 40% in aqueous phase with average particle size of 250-320 nm using over n=30. On the other hand, the effect of surfactant type in initial reactor charge was shown that when SDS as ionic surfactant was used, the polymer emulsion concentration was constant irrespective of the amount used, whereas CTAB as cationic surfactant and HN-100 as reactive surfactant were shown a tendency to the decrease of that. The effect surfactant type on final polymer particle size was shown in decrease by the order of SDS > CTAB > HN-100.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.186-192
• /
• 2012

Half-rail stacked drivers are used to reduce power consumption of the drivers for synchronous buck converters. In this paper, the stacked driver is optimized by matching the average charging and discharging currents used by high-side and low-side drivers. By matching the two currents, the average intermediate bias voltage can remain constant without the aid of the voltage regulator as long as the voltage ripple stays within the window defined by the hysteresis of the regulator. Thus the optimized driver in this paper can minimize the power consumption in the regulator. The current matching requirement yields the value for the intermediate bias voltage, which deviates from the half-rail voltage. Furthermore the required capacitance is also reduced in this design due to decreased charging current, which results in significantly reduced die area. The detailed analysis and design of the stacked driver is verified through simulations done using 5V MOSFET parameters of a typical 0.35-${\mu}m$ CMOS process. The difference in power loss between the conventional half-rail driver and the proposed driver is less than 1%. But the conventional half-rail driver has excess charge stored in the capacitor, which will be dissipated in the regulator unless reused by an external circuit. Due to the reduction in the required capacitance, the estimated saving in chip area is approximately 18.5% compared to the half-rail driver.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.433-437
• /
• 2007

Bis(dithiobenzil) metal complex, used as functional NIR absorbing dye and photostabilizer, was synthesized using bezoin and anisoin as intermediate compounds. And squarylium, a charge generation material, was synthesized to find its photostability effect. The structure of the product was determined by $^1H-NMR$ and FT-IR and the thermal property was analyzed by DSC and TGA. Optical property and photostability were determined by UV-Vis-NIR spectroscopy. High absorbance was obtained in the NIR range and maximum absorbing wavelength was shifted depending on the nature and position of substituent in the bis(dithiobenzil) metal complex. The photofading effect of squarylium decreased by the addition of bis(dithiobenzil) metal complex.

• Korean Journal of Agricultural Science
• /
• v.29 no.1
• /
• pp.8-14
• /
• 2002

Spray of maleic hydrazide (MH) was confirmed to be highly effective on the inhibition of lateral shoot growth regardless of grape cultivars and application concentration examined in this experiment. The optimal spray times were 30 days aft er full bloom in 'Kyoho' and 35 days in 'Campbell Early'. However, the optimum season of application should be adjusted depending on the vine vigor. The apical buds of lateral shoot was significantly affected at the concentration of $3,900mg{\cdot}L^{-1}$ resulting in the death and/or abscission. Thus the optimal concentration of MH seemed to be $1,950mg{\cdot}L^{-1}$. The inhibition effect by MH application was derive d from the decrease of node number and length. No adverse effect on fruit quality was found by MH application. In contrast, there was a tendency of anthocyanin in crease in 'Campbell Early' grapes. Results indicated that MH could be an effective agent to reduce the labor charge through the inhibition of later shoot growth.

• Journal of Korean Public Health Nursing
• /
• v.29 no.2
• /
• pp.190-202
• /
• 2015

Purpose: This study was designed to determine visiting nurses' job performance and self confidence by career and number of visiting households. Methods: The subjects were 120 visiting nurses fully in charge of the visiting health care program working in 18 community health care centers, who were checked for 5 domains of visiting nurses' job, 39 tasks of job performance and self confidence. ANOVA test, Scheffe test and Pearson correlation coefficient were used for data analysis. Results: The level of job performance and self confidence indicated highest in understanding of the visiting health care program among 5 domains of visiting nurses' job. The level of job performance and self confidence indicated lowest in community resource connection. When nurses were classified by a career with approximately 5 years of working experience, nurses with a career of more than 5 years were highly significant. Job performance and self confidence were positively correlated. Conclusion: Based on the result of this study, it is recommended that the education program for newly hired nurses should be differentiated from that for visiting nurses with a career in order to improve quality of the visiting nursing program and capacity of residents' health care.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.74-79
• /
• 2015

$Na-ZnCl_2$ battery, which operates as the same mechanism of $Na-NiCl_2$ battery using solid-electrolyte, is able to reduce its material cost by 40 % comparing to the $Na-NiCl_2$ battery. It has been known that the $Na-ZnCl_2$ battery produces $Na_2ZnCl_4$ as an intermediate phase during charge/discharge process. Therefore, the redox process is divided into four steps having the voltage range of 1.92~2.13 V. However, effects of the critical factors such as the composition of cathode materials, depth of charge and discharge, and additives have not been reported yet. We examined the effect of the Zn/NaCl ratios and revealed that its optimum ratio was in the range of 1.3~1.7.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.6
• /
• pp.271-276
• /
• 2013

The demand for stainless steel is continuously increasing with the development in offshore industry due to its excellent corrosion resistance characteristics. However, it suffers cavitation-erosion in application of high rotating fluid and the damage accelerates in combination with electrochemical corrosion because of Cl-ion in sea water. This paper investigated the complex damage behavior for 431 stainless steel, that is one of martensite stainless steels, through the hybrid test in sea water. Various experiments were carried out, including potential measurement, anodic/cathodic polarization experiment and Tafel analysis. Surface morphology was observed and damage depth was analyzed by SEM and 3D microscope after each experiment, respectively. The results revealed that more active potential was observed under cavitation condition than static condition due to breakdown of passive film and activation of charge transfer, and that higher corrosion current density was obtained under cavitation condition due to synergistic effect of corrosion and erosion.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.997-1002
• /
• 2007

In the case of international trade, the role of 3PL (third-party logistics) providers, in recent years, has drawn more attention. At the same time, computers have become faster, cheaper, and more widely available. Thus. information systems have become commonplace to freight forwarders and the increased efficiencies to be gained in improving logistics has pushed managers to explorer a number of new ideas, technologies and methods of information management and automation. However, many companies are encountering difficulties to choose an information system flexible and satisfying all needs carrying on business. In this study RIA (rich internet application) technology based on Java Swing was introduced to the .freight forwarder information systems to provide richer user interfaces and a flexible web-based application. Also considered giving stakeholders in charge of logistics especially in SMEs (Small and Medium Enterprises) cost-effective and performance-effective solutions with good accessibility of internet for smooth operations of their businesses.