• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.350-352
• /
• 2007

Modularized charge equalization converter for HEV lithium-ion battery cells is proposed in this paper, in which intra-module and inter-module charge equalization can be achieved at the same time. For intra-module charge equalization, the conventional flyback DC/DC converters of low power and small size are employed, in which all of the primary sides are coupled in parallel for selective charge of the specific under charged cell within the module. For inter-module charge equalization, the flyback DC/DC converters are also added, in which all the secondary windings are electrically linked in parallel for automatic charge balancing among the modules. An engineering sample of forty cells hiring the proposed cell balancing scheme is implemented and its experimental result shows that the proposed modularized charge equalization circuit has good cell balancing performance.

• 한국입자에어로졸학회지
• /
• 제14권1호
• /
• pp.17-24
• /
• 2018

Since the motion of the charged particle strongly depends on its charge characteristics, information on charge distributions of target particles is one of the important variables in aerosol research. In this study, charged distribution of atomized NaCl particles were measured using a Gerdien type ion counter. Two kinds of particle charging conditions were used in this study. First, atomized NaCl particles were passed through an aerosol neutralizer to have a Boltzmann charge distribution, and then its charge distribution was measured. In this case, the portion of uncharged particles was compared with the portion obtained from the Boltzmann charge distribution for verifying the suggested experimental method. Second, same experiment was conducted without the aerosol neutralizer to measure the charge distribution of atomized and un-neutralized NaCl particles. In the conclusion, the portion of uncharged, negatively charged and positively charged particles were 19%, 62% and 20%, respectively, for neutralized particles. The atomized particles, which was generated without the aerosol neutralizer, also had almost a zero charge state, but the standard deviation in charge distribution was larger than that of neutralized particles. The test method proposed in this study is expected to be used in various aerosol research fields because it can obtain simple information on the particle charge characteristics more easily and quickly than the existing test methods.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.413-415
• /
• 2008

The charge equalizer design for a series connected battery string is very challenging because it needs to satisfy many requirements such as implementation possibility, equalization speed, equalization efficiency, controller complexity, size and cost issues, voltage and current stress, and so on. Numerous algorithms and circuits were developed to meet the above demands and some interesting results have been obtained through them. However, for a large number of cells, for example, eighty or more batteries, the previous approaches might cause problems. Such problems include long equalization time, high controller complexity, bulky size, high implementation cost, and high voltage and current stress. To overcome these circumstances, this paper proposes a charge equalizer design method based on a battery modularization technique. In this method, the number of cells that we consider in an equalizer design procedure can be effectively reduces; thus, designing a charge equalizer becomes much easier. Furthermore, by applying the previously verified charge equalizers to the intramodule and the outer-module, we can obtain easy design of a charge equalizer and good charge balancing performance. Several examples and experimental results are presented to demonstrate the usefulness of the charge equalizer design method.

• 대한화학회지
• /
• 제11권4호
• /
• pp.121-125
• /
• 1967

各種 아민과 할로겐化合物間의 Charge Transfer Complex 形成與否를 檢討하여 보았다. Pyridine Tridthylamine, Piperidine Ethanolamine Triethanolamine, Aniline, Diethylamine 等의 아민類와 四鹽化炭素 또는 클로로폼의 混合溶液을 n-Hexane 溶媒存在下에서 紫外線吸收 스펙트라를 檢査한 結果 장파장쪽의 Shift가 있었으며 特히 Diethylamine과 Triethylamine은 클로로폼 또는 四鹽化炭素와 1:1 Charge Transfer Complex를 形成하였고, Piperidine은 接觸的 Complex를 形成하는 것이 確認되었다. Complex의 形成경향과 아민의 Nucleophilicity와의 關係를 論議하였다.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.272-276
• /
• 2015

The PbS quantum dot is an emerging photovoltaic material, which may provide high efficiency breakthroughs. The most crucial element for the high efficiency solar cells's development is to understand charge transport characteristics of PbS quantum dot solids, which are also important in planning strategic research. We have investigated charge transport characteristics of PbS quantum dot solids thin films using space charge limited conduction analysis and assessed thickness dependent photovoltaic performances. The extracted carrier drift mobility was $low-10^{-2}cm^2/Vs$ with the estimated diffusion length about 50 nm. These and recently reported values were compared with those from a commercial photovoltaic material, and we present an essential element in further development of PbS quantum dot solids materials.

• 한국토양비료학회지
• /
• 제37권3호
• /
• pp.136-142
• /
• 2004

몬모릴로나이트와 일라이트를 대상으로 Hybrid 모델, 세슘흡착법, CEC와 결정분석 및 전원소분석으로 계산한 영구전하량을 상호 비교하였다. 격자구조 계산에 의하면 몬모릴로나이트와 일라이트의 영구전하는 각각 $71.82cmol\;kg^{-1}$, $14.20cmol\;kg^{-1}$로 나타났고. 세슘흡착법으로 구한 영구전하는 격자 구조의 계산 값과 $3.07-6.41cmol\;kg^{-1}$ 이하의 차이를 나타내었다. 따라서 세슘흡착법으로 구한 영구전하 량은 이론적 계산치와 일치함을 알 수 있었다. Hybrid 모델로 구한 영구전하 값은 세슘흡착법과 격자계산법에 비하여 약 5-13배가 과소평가되므로 이 모델을 점토광물의 영구전하 측정에 적용하기는 어려울 것으로 판단되었다. 암모늄 이온을 이용한 양이온교환용량 값의 경우 몬모릴로나이트는 세슘흡착법으로 구한 영구전하 값과 동일하였다. 한편 일라이트에서 영구전하의 이론적 계산치와 CEC 값이 차이를 나타낸 것은 CEC측정에 사용된 암모늄 이온이 층간에 고정된 칼륨이온을 치환시킴으로서 CEC가 상대적으로 높게 평가된 것으로 판단되었다. 이상의 결과를 종합하여 볼 때 영구전하의 함량이 높은 점토광물이나 토양에서 영구전하를 분리 정량하고자 할 때에는 세슘흡착법을 이용하는 것이 바람직할 것으로 판단되었다.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.69-74
• /
• 1999

The microstructure of the reagion of carters, created by Cu and W-Cu shaped charge jets, in a 1020 mild steel target has been intestiaged. The region ahead of the crater created by the Cu shaped charge jet, reveals dramatic grain refinement implying the occurrence of a dynamic recrystallization, while that of W-Cu one dose a martensitic transformation indicative of heating up to an austenitic region followed by rapid cooling.The impacting pressure calculated when the W-Cu shaped charge jet encounters the target is higher than that of the Cu one. The micro-hardness of the region ahead of the crater created by the W-Cu shaped charge jet is also higher than that of the Cu one. The microstructure of W-Cu slug remained in the inside of the craters depicts the occurrence of the remarkable elongation of W particles during the liner collaphse. From these results, the microstructural variation of the region ahead of the crater with Cu and W-Cu shaped charge jets is discussed in trems of the pressure dependency of the transformation region of ferrite and austenite phases.

• 대한화학회지
• /
• 제11권4호
• /
• pp.126-131
• /
• 1967

各 種 아민(triethylamine, diethylamine, pyridine, diphenylamine, dimethylaniline)과 各種 Electron Acceptor($CCl_4,\;ICl,\;I_2$)를 Hexane 溶媒 存在下에서 作用시킨 結果 各各 Charge Transfer Complex를 形成하였으나 그 形成能은 아민의 Basicity에 比例하였고 Electron Donor의 Polarity의 差가 클 때에는 다른 形式의 Complex를 形成함을 紫外線 吸收 分光法으로 確認하였다. Complex 形成能과 아민의 Basicity 및 Electron Acceptor의 Polarity의 關係를 論하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.227-230
• /
• 2001

This paper deals with a bidirectional ac-dc converter used in ups system application. We propose a Voltage-Source-Charge-Pump-Power-Factor-Correction(VS-CPPFC) ac-dc converters. First of all, we propose a charge pump power-factor-correction converter. Secondly, we derive and analyse a unity power factor condition. The proposed topology is based on a half-bridge for the primary and a current-fed push pull for the secondary side of a high frequency isolation transformer. The advantage of bidirectional flow of power achieved by using the same power components is that the circuit is simple and efficient. And the galvanically isolated topology is specially attractive in battery charge/discharge circuits in ups system. We design equivalent model for the steady-state circuit and analyse operation waveforms for each mode. We show that the proposed model can be applied to ups system by simulation processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.299-301
• /
• 1997

It was investigated that space charge characteristics of EPDM/XLPE laminates as a function of interfacial condition. There were no effects in charge accumulation characteristics at EPDM/XLPE laminate samples pasted treated silicone oil and silicone grease. But when the crosslinking coagent (TMPTA) was pasted in laminate samples, there was no space charge in interface of EPDM/XLPE laminate. There were no effects in the laminate sample pasted silicone grease dissolved crosslinking coagent. In the coupling agent pasted EPDM/ XLPE laminate sample, space charge was accumulated in XLPE side caused by coupling agent.