• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.561-566
• /
• 2005

This paper introduces a compression technique for power qualify disturbance signal via discrete wavelet transform(DWT). The proposed approach is based on a previous estimation of the stationary component of power quality disturbance signal, so that it could be subtracted from the original signal in order to reduce a dynamic range of signal and generate transient events signal, which is subsequently applied to the compression technique. The compression techniques is performed through the difference signal decomposition, thresholding of wavelet coefficients, and signal reconstruction. It presents the relation between compression efficiency and threshold. It shouts that the wavelet transform leads to a power quality data compression approach with high compression efficiency, small compression error and good de-nosing effect.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.55-61
• /
• 2014

본 논문은 CMA 적응등화기에서 최소 disturbance 기법을 적용하여 진폭과 위상의 동시 보상이 가능한 ECMA (Enchanced CMA) 알고리즘의 성능에 관한 것이다. ECMA는 적응등화기 탭 계수의 변화량을 squared euclidean norm 관점에서 최소화하는 최소 disturbance 기법과 decision directed mode에 의한 gradient noise amplification 문제와 안정도 및 roburstness 성능을 알고리즘 연산량의 큰 증가없이 개선할 수 있고, 수신신호에서 진폭과 위상의 동시 보상이 가능하도록 새로운 비용함수를 제안하였다. 논문에서는 ECMA 알고리즘의 성능을 MCMA와 비교하기 위하여 컴퓨터 시뮬레이션을 수행하였다. 이를 위하여 수신측에서의 등화기 출력신호인 복원된 신호 성상도, 수렴 성능을 나타내는 성능지수인 잔류 isi 및 MD (Maximum Distortion), MSE 특성곡선과 채널과 등화기의 종합 주파수 특성을 성능 비교 지수로 사용하였다. 시뮬레이션 결과 ECMA가 복원성상도에서 진폭과 위상보상 능력 및 적응등화를 위한 수렴시간에서 MCMA보다 우월함을 알 수 있었다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.652-658
• /
• 2016

In practical control systems differences between nominal and real systems arise from internal uncertainties and/or external disturbances. This paper presents a model-based low-order disturbance observer for a sinusoidal disturbance with unknown constant offset. By using the disturbance model of a biased harmonic signal, the proposed method can successfully estimate the biased sinusoidal disturbance with unknown amplitude and phase but known frequency. At the first stage of the observer design, a model-based disturbance observer is designed when all the system states are measurable. Next, a sufficient condition is presented for the proposed observer to estimate the sinusoidal disturbance with a minimal-order additional dynamics using only output measurement. Comparative computer simulations are performed to test the performance of the proposed method. The simulation results show the enhanced performance of the proposed disturbance observer.

• 대한임베디드공학회논문지
• /
• 제5권3호
• /
• pp.136-143
• /
• 2010

Embedded systems widely used for wireless communication such as W-LAN, Bluetooth and ZigBee operate on ISM (Industrial, Scientific and Medical) band but they can be seriously affected by electromagnetic interference radiated from ISM apparatus. Therefore C.I.S.P.R. reports proposed limits for the protection of telecommunication from interference from ISM equipment. In this paper, we clarify the methods for calculating limits for disturbance signal for Embedded Systems in ISM band and propose simple way of calculating limits for interference signal in both above and below 1 GHz band cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.803-806
• /
• 1997

In this paper, a force estimation method is proposed for the sensorless force control. For this, a disturbance observer is applied to each joint of an n degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer in the absence of external force, the observer estimator is designed, where the uncertain parameters of the robot manipulator are adjusted by gradient method to minimize the output between the disturbance observer and the observer estimator. When the external force is exerted, the external force is estimated using the difference between the output of disturbance observer which include the external torque signal and that of observer estimator. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples are illustrated for the 2-axis planar type robot manipulator.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.966-971
• /
• 2010

An adaptive state observer is presented for a class of LTI systems that have a sinusoidal disturbance in the measurement output. Adaptation rules are developed for identifying the unknown sinusoidal disturbance signal from the system output. For the application of the identification result to the state estimation problem, the sinusoidal signal with arbitrary initial phase has been considered in this paper. In order to test the performance of proposed algorithm, comparative computer simulations have been carried out with an existing robust observer. The simulation results show the effectiveness of the proposed method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.189-197
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• 한국인터넷방송통신학회논문지
• /
• 제16권3호
• /
• pp.81-87
• /
• 2016

본 논문에서는 기존 MMA 적응 등화 알고리즘의 안정성과 낮은 신호대 잡음비에서 robustness를 개선하기 위해 adaptive modulus와 miniumum-disturbance 기법을 적용한 AM-SCS-MMA (Adaptive Modulus-Soft Constraint Satisfaction-MMA) 알고리즘의 성능을 해석하였다. AM-SCS-MMA는 적응 등화를 비용 함수를 최소화하기 위해 adaptive modulus와 기존의 LMS 나 gradient descent algorithm 대신 deterministic optimization problem의 minimum-disturbance 기법을 적용하여 탭 계수를 갱신하므로서 채널에서 발생되는 진폭과 위상 찌그러짐에 의한 부호간 간섭을 동시에 줄이면서 등화 필터의 안정성 및 다양한 잡음에 대한 roburstness를 개선시킬 수 있다. 이의 개선 성능을 확인하기 위해 시뮬레이션을 수행하였으며 등화기 출력 성상도, 잔류 isi, MSE와 채널 추적 능력을 나타내는 EMSE (Excess MSE) 및 SER을 적용하였다. 컴퓨터 시뮬레이션의 결과 AM-SCS-MMA는 MMA보다 잔류 isi와 MSE에서는 수렴 속도는 늦지만 정상 상태 이후 잔여량이 감소되고 열악한 신호대 잡음비에서 robustness가 있었지만, 채널 추적 능력에서는 열화됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.411-413
• /
• 1992

This paper proposes a simple and high performance hybrid position/force control of robots based on disturbance compensation by using the disturbance observer in task coordinate space. The disturbance observer linealizes system of robot manipulators in task coordinate space and realizes acceleration control. To realize the strict acceleration control, the disturbance observer whose input is a position signal by simple computation, works as if it were a disturbance detector. The inverse kinematics can be simplified, because the disturbance observer in task coordinate space compensates not only the disturbance but also the error due to the simplification of the inverse kinematics. The new strategy is applied to a three-degrees-of freedom direct drive robot. The robust and simple hybrid position/force control is realized experimentally.

• The Journal of the Acoustical Society of Korea
• /
• 제22권2E호
• /
• pp.78-86
• /
• 2003

We analyzed the measured acoustic field to explore the characteristics of a horizontal coherence in shallow water. Signal spatial coherence data were obtained in the continental shelf off the east coast of Korea using a horizontal line array. The array was deployed on the bottom of 130 m water depth and a sound source was towed at 26 m depth in the source-receiver ranges of 1-13 ㎞. The source transmitted 200 ㎐ pure tone. Topography and temperature profiles along the source track were measured to investigate the relationship between the horizontal coherence and environment variations. The beam bearing disturbance and array signal gain degradation is examined as parameters of horizontal coherence. The results show that the bearing disturbance is about ± 8° and seems to be affected by temporal variations of temperature caused by internal waves. The array signal gains show degradation more than 5㏈ by the temporal and spatial variations of temperature and by the down-sloped topography.