• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.342-344
• /
• 2003

This paper describes the correction of overcurrent protective relaying set value in distribution networks interconnected with wind farm by dedicated line. The wind farm composed of wind turbine generators is one of the great energy sources; however, it would be also highly possible that the current in the point of common coupling is influenced by the output power of wind farm. So, the overcurrent relay applied in distribution feeders might generate trip signal for normal operation. In order to prevent the mal-operation of overcurrent relay, it is necessary to correct the relay's setting value according to the output power of end farm. This paper presents the influence of wind farm on the overcurrent relaying set value in distribution feeders for cases of fault as well as normal operation and proposes the basic strategy for correction of overcurrent relaying set value.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.926-940
• /
• 2018

In clustering-based approaches, cluster heads closer to the sink are usually burdened with much more relay traffic and thus, tend to die early. To address this problem, distance-aware clustering approaches, such as energy-efficient unequal clustering (EEUC), that adjust the cluster size according to the distance between the sink and each cluster head have been proposed. However, the network lifetime of such approaches is highly dependent on the distribution of the sensor nodes, because, in randomly distributed sensor networks, the approaches do not guarantee that the cluster energy consumption will be proportional to the cluster size. To address this problem, we propose a novel approach called CACD (Clustering Algorithm Considering node Distribution), which is not only distance-aware but also node density-aware approach. In CACD, clusters are allowed to have limited member nodes, which are determined by the distance between the sink and the cluster head. Simulation results show that CACD is 20%-50% more energy-efficient than previous work under various operational conditions considering the network lifetime.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.617-626
• /
• 2022

To effectively monitor the variety of distributions of neutron flux, fuel power or temperatures in the reactor core, usually the ex-core and in-core neutron detectors are employed. The thermocouples for temperature measurement are installed in the coolant inlet or outlet of the respective fuel assemblies. It is necessary to reconstruct the measurement information of the whole reactor position. However, the reading of different types of detector in the core reflects different aspects of the 3D power distribution. The feasibility of reconstruction the core three-dimension power distribution by using different combinations of in-core, ex-core and thermocouples detectors is analyzed in this paper to synthesize the useful information of various detectors. A comparison of multilayer perceptron (MLP) network and radial basis function (RBF) network is performed. RBF results are more extreme precision but also more sensitivity to detector failure and uncertainty, compare to MLP networks. This is because that localized neural network could offer conservative regression in RBF. Adding random disturbance in training dataset is helpful to reduce the influence of detector failure and uncertainty. Some convolution neural networks seem to be helpful to get more accurate results by use more spatial layout information, though relative researches are still under way.

• Korean Management Science Review
• /
• v.11 no.2
• /
• pp.133-146
• /
• 1994

This study compares the performance of neural networks and ordinary least squares regression with quality-control processes. We examine the applicability of neural networks because they do not require any assumptions regarding either the functional from of the underlying process or the distribution of errors. The coefficient of determination($R^2$), mean absolute deviation(MAD), and the mean squared error(MSE) metrics indicate that neural networks are a viable and can be a superior technique. We also demonstrate that an assessment of the magnitude of the neural notwork input layer cumulative weights can be used to determine the relative importance of predictor variables.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.295-306
• /
• 2010

Network lifetime is a critical issue in Wireless Sensor Networks (WSNs). In which, a large number of sensor nodes communicate together to perform a predetermined sensing task. In such networks, the network life time depends mainly on the lifetime of the sensor nodes constituting the network. Therefore, it is essential to balance the energy consumption among all sensor nodes to ensure the network connectivity. In this paper, we propose an energy-efficient data routing protocol for wireless sensor networks. Contrary to the protocol proposed in [6], that always selects the path with minimum hop count to the base station, our proposed routing protocol may choose a longer path that will provide better distribution of the energy consumption among the sensor nodes. Simulation results indicate clearly that compared to the routing protocol proposed in [6], our proposed protocol evenly distributes the energy consumption among the network nodes thus maximizing the network life time.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.300-304
• /
• 2007

Wireless sensor networks represent a new and exciting communication paradigm which could have multiple applications in future wireless communication. Therefore, performance analysis of such a wireless sensor network paradigm is needed in complex wireless channel. Wireless networks could be an important means of providing ubiquitous communication in the future. In this paper, the BER performance of uniform distributed wireless sensor networks is evaluated in non-Gaussian noise channel. Using an analytical approach, the impact of Av. BER performance relating the coherent BPSK system at the end of a multi-hop route versus the spatial density of sensor nodes and impulsive noise parameters A and $\Gamma$ is evaluated.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.158-164
• /
• 2014

In indoor sensor networks equalization algorithms based on the minimization of Euclidean distance (MED) for the distributions of constant modulus error (CME) have yielded superior performance in compensating for signal distortions induced from optical fiber links, wireless-links and for impulsive noise problems. One main drawback of MED-CME algorithms is a heavy computational burden hindering its implementation. In this paper, a recursive gradient estimation for weight updates of the MED-CME algorithm is proposed for reducing the operations $O(N^2)$ of the conventional MED-CME to O(N) at each iteration time for N data-block size. From the simulation results of the proposed recursive method producing exactly the same results as the conventional method, the proposed estimation method can be considered to be a reliable candidate for implementation of efficient receivers in indoor sensor networks.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.262-268
• /
• 2011

In this paper, we evaluate the outage performance of cooperative transmission in two-dimensional random networks. Firstly, we derive the joint distributions of the source-relay and the relay-destination links. Secondly, the outage probability for the decode-and-forward relaying system is derived when selection combining (SC) is employed at the destination. Finally, we calculate the average outage probability of the system and then attempt to express it by a simple approximate expression. The simulation results are presented to verify the accuracy of the derivations. Similar to deterministic networks, the cooperative transmission in random networks outperforms direct transmission at a high signal-to-noise ratio (SNR).

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.38-44
• /
• 2013

This paper proposes a new dynamic spectrum access (DSA) algorithm for cognitive radio networks. Once initialized, this algorithm works without the need of coordination overhead and hence can be used when no control channel is available. Secondary user (SU) lists and predetermined access control are used in this algorithm. We analyze the probability of no SU collision with primary user and the throughput of our proposed algorithm. Extensive simulations show that our algorithm outperforms the existing DSA algorithm in terms of both the aggregate throughput and the traffic distribution fairness. Furthermore, the validity of our analysis is confirmed by simulation results.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2452-2454
• /
• 2001

KEPRI, the research institute for KEPCO, has started developing a DAS using wireless communication networks since 1999. The wireless networks adopted Radio Link Protocol (RLP) of Personal Communication Service (PCS) as communication protocol. It is the first time that PCS is applied to data networks for DAS. The communication protocol, RLP, makes the DAS networks simple and economically affordable when they are installed at widely dispersed small cities. But, RLP has problem when it send unsolicited message. This paper describes the implementing method of a wireless network using RLP and TCP/IP Network to cope with unsolicited message problem.