• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.797-820
• /
• 2018

Purpose: It is to seek for an appropriate cost rate analysis methodology of credit card value propositions in Korea. For this issue, it is claimed that methodologies based on probability distribution is more suitable than methodologies based on data-mining. The analysis model constructed for the cost rate estimation is called VCPM model. Methods: The model includes two major variables denoted as S and P. S is monthly credit card usage amount. P stands for the proportion of usage amount at special merchants over the whole monthly usage amount. The distributions assumed for P are positively skewed distributions such as exponential, gamma and lognormal. The major inputs to the model are also derived from S and P, which are E(S) and the aggregate proportion of usage amount at special merchants over the total monthly usage amount. Results: When the credit card's value proposition is general discount, the VCPM model fits well and generates reasonable cost rate(denoted as R). However, it seems that the model does not work well for other types of credit cards. Conclusion: The VCPM model is reliable for calculating cost rate for credit cards with positively skewed distribution of P, which are general discount card. However, another model should be built for cards with other types of distributions of P.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.151-157
• /
• 2012

Even though the protective facility is well made with the development of medicine, the spatial dose within the radiation section could increase the exposure of the workers. The spatial dose is always present in distribution room within the Department of Nuclear Medicine, so the spatial dose of the interior distribution room is measured and analyzed for the prediction of the exposure dose. The spatial dose rate was $6.78{\pm}0.083{\mu}Sv/h$ in the $^{18}F$ distribution room of department of Nuclear Medicine, $9.248{\pm}0.013{\mu}Sv/h$ in $^{99m}Tc$, and $^{131}I$ distribution room. In addition, in case of $^{18}F$ distribution room, the yearly external exposure dose was $42.5{\mu}Sv$ when the nurse does IV in 1m in distance. It also showed that the spatial dose rate on the direction of right oblique showed higher than others by the standard of distribution window of distribution room. Therefore, the staying time of the workers should be short during distributing radiopharmaceuticals in the distribution room and the design of the distribution protection is necessary to reduce the exposure in the direction of right oblique of the protection. The utmost endeavors are required to reduce the worker's individual exposure dose while doing IV.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2002

The formation of soluble microbial products(SMP) and molecular weight distribution on loading rate were observed in batch-type culture medium, which phenol was fed as a substrate. The molecular weight destribution was obtained by using 30K, 100K dalton and $0.45{\mu}$ membrane filters. When the phenol concentrationas a substrate was 120, 230 and 440 mg/L , the specific substrate utilization rate(q) showed 0.639, 1.281 and 1.744 mgTOC/mgMLSS/day, respectively. The endogenous biomass decay rate constant($K_d$) at each substrate concentration was 0.00536, 0.0661 and 0.0749($day^1$), respectively. The $SMP_e$ product rate constant($k_{SMP}_ e$) showed 0.006, 0.0058 and 0.0057($day^1$), respectively. The initial influent substrate during the course of time degraded and produced $SMP_s$. The $SMP_s$ was converted to the $SMP_{nd}$ and endogenous phase converted to the $SMP_e$ ingredients. The molecula weight distribution on loading rate was converted to a higher MW during the course of time.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.219-228
• /
• 2002

The divided channel is not often used on the river and when the installation is for the controlling of the flow quantity. The determination of the channel size is not a easy task. Model tests are examined to confirm the variation of distribution rate by the method of the channel installation and the position of the structure and the adjustment of numerical simulation is executed by the comparing of the results. This study is to execute numerical model according to installation of divided channel by using AQUADYN program, the 2nd dimension numerical model, and HEC-RAS program, the 1st dimension numerical model, by the shape of divided channel. Also, it compares with difference by method about each case.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.482-483
• /
• 2009

In chemical mechanical planarization (CMP) process, the uniformity of stress acting on wafer surface is a key factor for uniform material removal of thin film especially in the oxide CMP. In this paper, we analyze the stress on the contact region between wafer and pad with finite-element analysis (FEA). The setting pressure acting on wafer back side was $500g/cm^2$ and the retainer pressure was changed from 300 to $700g/cm^2$. The polishing test is also done with the same conditions. The material removal rate profiles well-matched with stress distribution.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1169-1175
• /
• 2009

In this paper, the inferences of data obtained from periodic inspection and type I censoring for the step-stress accelerated life test are studied. The exponential distribution with a failure rate function that a log-linear function of stress and the tampered failure rate model are considered. The maximum likelihood estimators of the model parameters are estimated and also the optimal stress change time which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined. A numerical example will be given to illustrate the proposed inferential procedures and the sensitivity of the asymptotic variance of the estimated mean by the guessed parameters is investigated.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.4
• /
• pp.125-138
• /
• 2006

This paper considers a periodic review, two-echelon inventory system with one central warehouse and several re-tailers facing normally distributed demand. The goal is to attain target fill rates, while the systemwide total holding costs are minimized. An important aspect of this problem is material rationing in the case of shortages. If a central warehouse has insufficient inventory to deliver all replenishment orders to retailers, all order quantities are should be adjusted according to some rationing rule. A simple but efficient rationing rule is proposed and compared with the Balanced Stock (BS) rationing as introduced by Heijden which is known to be the best rationing policy in the literature. Numerical results show that the proposed rationing rule is more cost effective than BS rationing, especially for the differences in holding costs between retailers are large.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1375-1386
• /
• 2006

In life testing, the lifetimes of test units under the usual conditions are so long that life testing at usual conditions is impractical. Testing units are subjected to conditions of high stress to yield informations quickly. In this paper, the inferences of parameters on the three step-stress accelerated life testing are studied. The two-parameter exponential distribution with a failure rate function that a log-quadratic function of stress and the tempered failure rate model are considered. We obtain the maximum likelihood estimators of the model parameters and their confidence regions. A numerical example will be given to illustrate the proposed inferential procedures.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.263-266
• /
• 2003

This paper is intended to compare between the Bayesian estimates of hazard rate and the hazard rates of mixed distributions. In estimating hazard rates, especially when the MLE method is used, such difficulties as a lack of data and the existence of censored data make it difficult to estimate the rates. For this reason, the estimates of hazard rate based on the Bayesian approach are introduced. For the simplicity, the exponential and gamma distributions are adopted as a sampling distribution and its natural conjugate prior distribution, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.2
• /
• pp.90-96
• /
• 2000

The technology of preventive maintenance and corrective maintenance is widely applied to ships in order to maintain the good voyageable condition. One of the most important fields of marine engineering is to seek the maximum availability and to solve the stochastic maintenance problem such that the cost for corrective maintenance is minimized. Accordingly, for the purpose of making the most suitable maintenance schedule which minimizes the expected cost function, this paper suggests the method to grasp the failure characteristics by the ship's maintenance data that are collected from the past. And, suggests the method to estimate the optimal maintenance interval by using the dynamic programming and the cumulative hazard rate function attained from the maintenance data.