• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.279-287
• /
• 2015

The present research was carried out in order to investigate the occurrence of problematic weed species in Cnidium officinale Makino. Field in South Korea. Total 53 sites of the 3 different regions in S. Korea were investigated from May to October, 2014. In Cnidium officinale fields, the identified weeds were distributed in 35 families and 99 species. Total 5 communities that consist of Commelina communis, Eleocharis kuroguwai, Persicaria vulgaris, Chenopodium album-Acalypha australis, and Galinsoga ciliata dominated the appearance. The weeds occurred in Cnidium officinale fields were divided into three groups in principal component plot analysis (PCA). It was observed that in control weeds plots; 20 plants of Cnidium officinale fresh weight is 739.9 g while the uncontrolled plots have no Cnidium officinale plants. The current investigation could be useful for estimation of future weeds occurrence, weed flora dynamics and establishment of weed control methods in Cnidium officinale fields in Korea.

• Animal cells and systems
• /
• v.14 no.4
• /
• pp.305-313
• /
• 2010

Pacific abalone Haliotis discus discus is an important fisheries resource in Jeju, Korea. For basic information about its current genetic status in relation to stock enhancement, the level and distribution of genetic variation between wild and released stocks of Pacific abalone in Jeju were examined at nine cross-species microsatellite markers including the use of two novel primers. High levels of polymorphism were observed between the two populations. A total of 146 different alleles were found at all loci, with some alleles being unique. The allelic variability ranged from five to 27 in the wild population and from four to 16 in the released sample. The average observed and expected heterozygosities were estimated to be 0.74 and 0.84 in the wild sample and 0.70 and 0.78 in the released sample, respectively. Although a considerable loss of rare alleles was observed in the released sample, no statistically significant reductions were found in heterozygosity or allelic diversity in the released sample compared to the wild population. Low but significant genetic differentiation was found between the wild and released populations. These results suggest that the intensive breeding practices for stock enhancement may have resulted in a further decrease in genetic diversity, and that the cross-species microsatellite markers used in this study represent a potentially efficient means for further genetic studies, providing beneficial information for the protection and management of H. discus discus.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.58-63
• /
• 2017

Emergencies and disasters can happen any time without any warning, and things can change and escalate very quickly, and often it is swift and decisive actions that make all the difference. It is a responsibility of the building facility management to ensure that a proven evacuation plan in place to cover various worst scenario to handled automatically inside the facility. To mapping out optimal safe escape routes is a straightforward undertaking, but does not necessarily guarantee residents the highest level of protection. The emergency evacuation navigation approach is a state-of-the-art that designed to evacuate human livings during an emergencies based on real-time decisions using live sensory data with pre-defined optimum path finding algorithm. The poor decision on causalities and guidance may apparently end the evacuation process and cannot then be remedied. This paper propose a cloud connected emergency evacuation system model to react dynamically to changes in the environment in emergency for safest emergency evacuation using IoT based emergency exit sign system. In the previous researches shows that the performance of optimal routing algorithms for evacuation purposes are more sensitive to the initial distribution of evacuees, the occupancy levels, and the type and level of emergency situations. The heuristic-based evacuees routing algorithms have a problem with the choice of certain parameters which causes evacuation process in real-time. Therefore, this paper proposes an evacuee routing algorithm that optimizes evacuation by making using high computational power of cloud servers. The proposed algorithm is evaluated via a cloud-based simulator with different "simulated casualties" are then re-routed using a Dijkstra's algorithm to obtain new safe emergency evacuation paths against guiding evacuees with a predetermined routing algorithm for them to emergency exits. The performance of proposed approach can be iterated as long as corrective action is still possible and give safe evacuation paths and dynamically configure the emergency exit signs to react for real-time instantaneous safe evacuation guidance.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Journal of Korean Home Economics Education Association
• /
• v.8 no.1
• /
• pp.1-10
• /
• 1996

This study aims at finding a new home economics education which will include male and female students as its teaching objects, and then providing home economics teachers with useful materials. For this purpose I examined analized male and female the upper secondary school students’and parents’recognition and demand to the home economics education The conclusion of this study is summarized as follows： 1. There was significant difference between male students(73.7％) and female students(89.8％) in the necessity for studying Home Economics(P＜.001). In the necessity of Home Economics education, male students emphasized the spiritual part but female students emphasized the functional part. In part of parents, there was no significant difference between fathers(95.5％) and mothers(96.4％). 2. The necessity of each part in the contents of Home Economics 1) In the part of family, there was significant difference between male and female students in the true nature of family, the role and responsibility of family, and the laws relating to family(P＜.001). There was significant difference between mothers and fathers in the true nature of family and the role and responsibility of family. Fathers and male students emphasized the true nature of family and the role and responsibility of family more than mothers and female students did. 2) In the Home management and economy parts, there was significant difference between male and female students in the significance of home management(P＜.001), the relation of family to society(P＜.001), and fluctuating measures for home economy. There was significant difference between fathers and mothers in the relation of family to society(P＜.05). Fathers and male students emphasized the relation of family to society more than mothers and female students did. Mothers, male and female students emphasized the importance of the protection of consumers. 3) In the clothes part, male students emphasized the role of clothes, the disign and making of clothes(P＜.001), the present situation of the resources of clothing and the distribution of clothes (P＜.05) more than female students did. 4) In the part of food, there was significant difference between male and female students in the kinds and function of nutritive elements(P＜.05). Parents and students emphasized the importance of selecting good food. 5) In the part of housing, male students emphasized home planning, and arrangements and facilities of house more than female students did. Female students emphasized the interior of the house(P＜.05). Fathers emphasized the planning of a residential space and arrangements and facilities of a house(P＜.05) more than mothers did. 6) In the parts of human development and upbringing, and upbringing, male students emphasized the significance of being parents, family planning and the population problem(P＜.001), pregnancy and delivery(P＜.01), and the chracteristic of juvenile development(P＜.05) more than female students did. Parents and students emphasized the importance of prevention and countermeasures for diseases and the significance of being parents.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.752-757
• /
• 2017

Analysis has been performed for the penetration of a long-rod into MMC/Ceramic layered armour system with several shot test and a series of simulations. Two types of MMC plate have been fabricated by a liquid pressing method; A356/45%vol.%SiCp with a uniform distribution of SiC particle and Al7075/45%vol.B4Cp with B4C particle. The mechanical properties were measured with the high-speed split Hopkins bar test, hardness test and compression test. The popular Simplified Johnson-Cook model was adopted to represent the material characteristics for FEM simulations. The performance of the MMC applied armour system has been made by comparing with the semi-infinite mild steel target using the depth of penetration(DOP). The results show that placing ceramic front layer provides a certain gain in protection, and that placing another ductile front layer provides a further gain. The application of MMC is found to be attractive.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.93-99
• /
• 1968

The Present study attempted to analyze the fate of CO diffused into the circulating blood through the alveoli. Dogs were induced to CO poisoning by rebreathing CO gas mixture contained in Krog's spirometer, by closed circuit method, for 60 minutes. The spirometer was filled initially with 282 ml of CO and 20 liters of air and oxygen, so the composition of gases were arranged as 1.4% in CO and 50% in $O_2$ at the begining of the rebreathing. Oxygen was added corresponding to the utilization of $O_2$ by the animal in proceeding of the experiment. At 60th minutes of CO rebreathing, the concentration of CO in arterial blood and in mixed venous blood were analysed and compared with each other after the CO contents were corrected with the hematocrit measured in the arterial and mixed venous blood. The distribution of CO gas to other tissues was estimated by the analysis of CO diffused into the cystic bile and into the peritoneal gas pocket which was formed by injection of 300 ml air into the peritoneal cavity prior to the CO gas rebreathing. The blood volume was measured by dilution method using $^{51}Chromium$ tagged red cells. CO amount vanished in the animal body was calculated by subtraction of total CO content in blood stream and the CO remained in closed circuit breathing system from the CO amount given to the breathing system at the begining of the experiment. Results obtained are summarized as follows: 1. The content of CO corrected by the hematocrit value was slightly less in mixed venous blood than in arterial blood. The amount of CO diffused into the cystic bile and into the peritoneal cavity was averaged to 0.1% and 0.4% of the CO amount in 100 ml of blood, respectively. 2. For 60 minutes of CO rebreathing, CO-hemoglobin saturation reached about 77% at the 60th minutes, CO amount vanished in the experimental animal averaged 36.1 ml/dog/hr., or 21% of the total CO volume in the blood stream. The average vanishing rate of CO during 60 minutes of CO rebreathing per kg of body weight was 2.71 ml/hr. Production of CO measured in ten dogs under hypoxic condition averaged 0.023 ml/kg/hr. The major part of the CO vanished in the dogs seemed to be oxidized to $CO_2$ by various tissues of the animal. The conclusion might be delivered as such oxidation of CO to $CO_2$ by animal tissues can play a role in part of the process of recovery and protection of animal from CO-poisoning.

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.121-130
• /
• 2004

In this study, ultrastructural change of the bile duct fibroblast at infected rat with Clonorchis sinensis, and the distribution of lectin receptors and actin protein in cultured bile duct infected with Clonorchis sinensis. It explored using colloidal gold label complex with lectin WGA purified from wheat germ (Triticum vulgaris) and anti actin antibody purified actin (43 kDa) isolated from chicken back muscle. The lectin WGA with protein A gold complex labeled sections of the cultured fibroblast revealed gold particles specifically distributed on the multi vesicular form Golgi complex and cell surface of the fibroblast. The actin antibody with protein A gold complex labeled sections of the cultured fibroblast revealed gold particles specifically distributed on the cytoplasm of the fibroblast. Labeling of cultured fibroblast in rat bile duct infected with Clonorchis sinensis was then quantified and compared to that of cultured Fibroblast in Rat Bile duct. These results indicate that lectin WGA receptors are located in the multi vesicular form Golgi complex in the cytoplasm to the cytoplasmic process of the Rat bile duct fibroblast infected with Clonorchis sinensis. Therefore, the GlcNAc and NeuNac regions on the cell surface and cytoplasmic process appear to be functionally associated with cell-recognition and protection from other cell of the tissue, and linked with secretion and exocytosis of the fibroblst cytoplasm. GlcNAc and NeuNAc product in the multi vesicular form Golgi complex then it is transported to cell surface. Actin protein is many appears that infected fibroblast rather than normal fibroblast. The fibroblast of infected with Clonorchis sinensis are against of the physical and chemical stimulation. Then development of cytoplasmic process is relative some stimulation.