• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.11-24
• /
• 2010

Lighting industry is rapidly being developed as the ubiquitous society based on sensor network emerges. This kind of paradigm shift brings the society convergence of technologies which leads to smart lighting system as well as the integration of interior and sensibility control. However, standards for sensors have not been firmly established, and problems related to quality and malfunction have been brought up, thereby calling for careful approach to the enhancement and assessment of reliability of the item. In this article reliability assessment criteria for sensor module for lighting fixtures is established in terms of performance assessment criterion and reliability assessment criterion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.16-16
• /
• 2000

This paper describes a new structure re create a pseudo Gaussian function network (PGFN). The activation function of hidden layer does not necessarily have to be symmetric with respect to center. To give the flexibility of the network, the deviation of pseudo Gaussian function is changed according to a direction of given input. This property helps that given function can be described effectively with a minimum number of center by PGFN, The distribution of deviation is represented by level set method and also the loaming of deviation is adjusted based on it. To demonstrate the performance of the proposed network, general problem of function estimation is treated here. The representation problem of continuous functions defined over two-dimensional input space is solved.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.29-34
• /
• 2017

This study analyzed a life test method for a power take-off (PTO) gearbox. An engine transfers mechanical power (rotation and torque) to a hydraulic pump through a PTO Gearbox with one input shaft and three output shafts. PTO gear box durability under high loads over long time periods was tested using dynamometers. In order to reflect the rated operating conditions, power must be distributed to each output shaft, and experiments were conducted under various conditions to verify the characteristics of the distributed power. An accelerated life test was designed using speed and torque as acceleration factors. Also, efficiency tests were conducted under various load conditions. Also, a lubrication oil composition analysis was performed to analyze gearbox wear status.

• 수면정신생리
• /
• 제6권1호
• /
• pp.26-31
• /
• 1999

"Attention" is not defined sufficiently. This term incorporates several dimensions or complex information processes such as alertness, spatial distribution, focused attention, sustained attention, divided attention and supervisory attentional control. In practice, however, various aspects of attention cannot be assessed separately with a single test. Moreover, a particular test is never assessing attention only, because the several intervening variables may influence the attentional component. Therefore, one can only assess a certain aspect of human behavior with special interest for its attentional component. This paper attempted to clarify various concepts of attention, reviewed signal detection theories with receiver operating characteristic(ROC) curves, and listed practical methods for assessment of attention.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• 한국토양비료학회지
• /
• 제45권5호
• /
• pp.836-841
• /
• 2012

동복호 저수구역내 침수된 식물체별 생육특성과 영양염류 함량 및 흡수량을 조사하기 위해 침수지역의 수위별 식물체의 분포와 생육특성을 각각 조사하였고, 자생하는 식물체들의 biomass 및 영양염류 흡수량을 조사하였다. 저수구역의 전체 면적은 $209,160m^2$로 침수 전 식생의 총 면적은 $156,871m^2$이었고, 7월 11일에는 장마로 인하여 식생이 서식하는 저수구역내 중부 및 하부가 침수되었다. 침수지역내우점 식생은 이삭사초, 돌피, 여뀌 및 털빕새귀리로 이삭사초가 전체 식생면적의 53.3%를 차지하였다. 동복호 저수구역내 주요 우점종의 분포비율에 따른 단위면적 당 ($m^{-2}$) O.M 총 흡수량은 이삭사초 ($204.5g\;m^{-2}$) > 털빕새귀리 ($40.6g\;m^{-2}$) > 여뀌 ($21.7g\;m^{-2}$) $\fallingdotseq$ 돌피 ($21.3g\;m^{-2}$) 순으로 높았다. T-N 총 흡수량은 이삭사초가 $1.30g\;m^{-2}$로 전체총 흡수량 ($2.55g\;m^{-2}$)의 약 51%를 차지하였고, 돌피, 여뀌 및 털빕새귀리가 각각 10, 13 및 12%를 차지하였다. T-P 총 흡수량은 이삭사초가 전체 T-P 총 흡수량의 51.8%인 $0.350g\;m^{-2}$로 가장 높았다. 이상의 결과를 미루어 볼 때, 동복호 저수구역내 주요 침수 식물체는 침수 후 영양염류를 용출하여 동복호의 부영양화를 촉진시킬 수 있을 것으로 판단된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.222-227
• /
• 2004

The sub-bitline (SBL) sensing voltage of a cell and total cell array can be measured by the method of SBL voltage evaluation method. The MOSAID tester can collect all SBL signals. The hierarchical bitline of unit cell array block is composed of the cell array of 2k rows and 128 columns, which is divided into 32 cell array sections. The unit cell array section is composed of the cell array of 64 rows and 128 columns. The average sensing voltage with 2Pr value of $5{\mu}C/cm^2$ and SBL capacitance of 40fF is about 700mV at 3.0V operation voltage. That is high compensation method for capacitor size degradation effect. Thus allowed minimum 2Pr value for high density Ferroelectric RAM (FeRAM) can move down to about less than $5{\mu}C/cm^2$.

• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.527-539
• /
• 2018

The use of reinforced concrete (RC) shear wall with concrete filled steel tube (CFST) columns and steel fiber reinforced concrete (SFRC) shear wall has aroused widespread attention in recent years. A new shear wall, named SFRC shear wall with CFST columns, is proposed in this paper, which makes use of CFST column and SFRC shear wall. Six SFRC shear wall with CFST columns specimens were tested under cyclic loading. The effects of test parameters including steel fiber volume fraction and concrete strength on the failure mode, strength, ductility, rigidity and dissipated energy of shear wall specimens were investigated. The results showed that all tested shear wall specimens exhibited a distinct shear failure mode. Steel fibers could effectively control the crack width and improve the distribution of cracks. The load carrying and energy dissipation capacities of specimens increased with the increase of steel fiber volume fraction and concrete strength, whilst the ductility of specimens increased with the increase of steel fiber volume fraction and the decrease of concrete strength.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.11-18
• /
• 2017

In order to maintain customer voltages within the allowable limit($220{\pm}13V$) as much as possible, tap operation strategy of SVR(Step Voltage Regulator) which is located in primary feeder, is widely used for voltage control in the utilities. However, SVR in nature has operation characteristic of the delay time ranging from 30 to 150 sec, and then the compensation of BESS (Battery Energy Storage System) during the delay time is being required because the customer voltages in distribution system may violate the allowable limit during the delay time of SVR. Furthermore, interconnection of PV(Photovoltaic) system could make a difficultly to keep customer voltage within the allowable limit. Therefore, this paper presents an optimal coordination operation algorithm between BESS and SVR based on a conventional LDC (Line Drop Compensation) method which is decided by stochastic approach. Through the modeling of SVR and BESS using the PSCAD/EMTDC, it is confirmed that customer voltages in distribution system can be maintained within the allowable limit.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.76-82
• /
• 2016

A 2-D hydrodynamic model for predicting the movement of debris flow was developed. The developed model was validated against a dam break flow problem conducted in EU CADAM project, and the performance of the model was shown to be satisfactory. In order to suggest structural alternative for hazardous zone vulnerable to debris flow disaster, two types of initial mass distribution and two shapes of defensive structure were considered. It was found that 1) the collapse of debris mass initiated with square pyramid shape induced more damage compared with that of cubic shape; and 2) a defensive structure with semi-circular shape was vulnerable to debris flow disaster in terms of debris control or primary defense compared with that of rectangular-shaped structure.