드라이브 ㆍ 컨트롤 (Journal of Drive and Control)

  • 제14권1호
  • /
  • Pages.29-34
  • /
  • 2017
  • /
  • 2671-7972(pISSN)
  • /
  • 2671-7980(eISSN)
유공압건설기계학회 (The Korean Society for Fluid Power and Construction Equipment)
권호 표지
DOI QR코드

DOI QR Code

단일입력 다출력 PTO 기어박스의 내구성시험에 관한 연구

Study of a Durability Test for Single-input Multi-output Power Take-off Gearboxes

  • Lee, Yong Bum (Reliability Assessment Center, Korea Institute of Machinery & Materials) ;
  • Yoo, Han Ju (Reliability Assessment Center, Korea Institute of Machinery & Materials)
  • 투고 : 2016.11.29
  • 심사 : 2017.02.14
  • 발행 : 2017.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study analyzed a life test method for a power take-off (PTO) gearbox. An engine transfers mechanical power (rotation and torque) to a hydraulic pump through a PTO Gearbox with one input shaft and three output shafts. PTO gear box durability under high loads over long time periods was tested using dynamometers. In order to reflect the rated operating conditions, power must be distributed to each output shaft, and experiments were conducted under various conditions to verify the characteristics of the distributed power. An accelerated life test was designed using speed and torque as acceleration factors. Also, efficiency tests were conducted under various load conditions. Also, a lubrication oil composition analysis was performed to analyze gearbox wear status.

키워드

참고문헌

  1. H. G. Kim, J. W. Choi, S. J. Yoo, K. S, Yi, "Development of Power Management Strategies for a Compound Hybrid Excavator," Transactions of the Korean Society of Mechanical Engineers A, Vol. 35, No. 12, pp. 1537-1542, 2011 https://doi.org/10.3795/KSME-A.2011.35.12.1537
  2. K. Y. Kim, D. S. Jang, "Development of the Close-Loop Swing System for a Fuel Efficiency Excavator," KSFC Spring Conference, pp. 113-115, 2012
  3. K. M. Lee, 2005, "Failure Analysis and Accelerated Life Test for Hydraulic Sealing Component of Heavy Equipment", The Korean Reliability Society, Spring conference, pp. 311-325
  4. S. R. Lee, H. E. Kim, 2006, "Determination of No-Failure Test Times for the Life Test of Hydraulic System Components", Journal of Applied Reliability, Vol. 3, No. 3, pp. 8-13
  5. ANSI/AGMA 2001-D04(2001) Fundamental rating factors and calculation methods for involute spur and helical gear teeth
  6. J. C. Fitch, "Source book for Used Oil Elements" Transmissions Common Wear Metal Ranges
  7. S. Ebersbach, Z. Peng, N.J. Kessissoglou, "The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques," Wear, Vol. 260, pp. 16-24, 2006 https://doi.org/10.1016/j.wear.2004.12.028
  8. A. R. Breeds, S. N. Kukureka, K. Mao, D. Walton, C. J. Hooke, "Wear behaviour of acetal gear pairs," Wear, Vol. 166, pp. 85-91, 1993 https://doi.org/10.1016/0043-1648(93)90282-Q

피인용 문헌

  1. Development of a Wave Energy Converter with Mechanical Power Take-Off via Supplementary Inertia Control vol.6, pp.3, 2017, https://doi.org/10.1007/s40684-019-00098-1