• 제목/요약/키워드: Distributed Raman Amplifier

검색결과 4건 처리시간 0.015초

Design of Hybrid Optical Amplifiers for High Capacity Optical Transmission

  • Kim, Seung-Kwan;Chang, Sun-Hyok;Han, Jin-Soo;Chu, Moo-Jung
    • ETRI Journal
    • /
    • 제24권2호
    • /
    • pp.81-96
    • /
    • 2002
  • This paper describes our design of a hybrid amplifier composed of a distributed Raman amplifier and erbium-doped fiber amplifiers for C- and L-bands. We characterize the distributed Raman amplifier by numerical simulation based on the experimentally measured Raman gain coefficient of an ordinary single mode fiber transmission line. In single channel amplification, the crosstalk caused by double Rayleigh scattering was independent of signal input power and simply given as a function of the Raman gain. The double Rayleigh scattering induced power penalty was less than 0.1 dB after 1000 km if the on-off Raman gain was below 21 dB. For multiple channel amplification, using commercially available pump laser diodes and fiber components, we determined and optimized the conditions of three-wavelength Raman pumping for an amplification bandwidth of 32 nm for C-band and 34 nm for L-band. After analyzing the conventional erbium-doped fiber amplifier analysis in C-band, we estimated the performance of the hybrid amplifier for long haul optical transmission. Compared with erbium-doped fiber amplifiers, the optical signal-to-noise ratio was calculated to be higher by more than 3 dB in the optical link using the designed hybrid amplifier.

  • PDF

10 Gbit/s 128 채널 고밀도 파장다중화 신호를 위해 EDFA와 라만 증폭기를 이용한 320km 광전송 실험 (320km Optical Transmission using EDFA and Raman amplifier for 10Gbit/s 128 Channel DWDM Signals)

  • 최보훈
    • 한국통신학회논문지
    • /
    • 제34권6B호
    • /
    • pp.568-574
    • /
    • 2009
  • 128 채널 고밀도 파장다중화 광신호들을 위한 320km 광전송 링크가 시뮬레이션으로 계산되고 실험으로 구현되었다. 이 링크에서 사용된 광섬유 증폭기은 분산형 라만 증폭기와 C 대역과 L 대역을 함께 증폭시킬 수 있는 이중 대역 EDFA가 함께 고려되어 컴퓨터 시뮬레이션을 통해 링크의 특성이 계산되었다. 여기서 계산된 값을 구현할 수 있도록 증폭기의 구조가 최적화되고 이 구조가 모듈로 제작되었다. 제작된 증폭기를 사용하여 구현된 링크에서 측정된 320km 거리에서의 광신호잡음비는 각 대역에서 평균 25dB였고 이는 처음 링크 계산 시에 의도된 값과 잘 일치하였다.

1.6 Tb/s (160x10 Gb/s) WDM 신호의 단일 모드 광섬유 2,000 km 전송 (1.6 Tb/s (160x10 Gb/s) WDM Transmission over 2,000 km of Single Mode Fiber)

  • 한진수;장순혁;이현재
    • 한국통신학회논문지
    • /
    • 제29권7A호
    • /
    • pp.712-718
    • /
    • 2004
  • 분산형 라만 광증폭기와 어븀 첨가 광섬유 증폭기로 구성된 복합형 광증폭기를 사용하여 1.6 Tb/s (160${\times}$10 Gb/s) 전송 용량의 WDM 광신호를 단일 모드 광섬유 2,000 km에 전송한 결과에 대하여 기술한다. 복합형 광 증폭기를 사용하여 단일 모드 광섬유 2,000 km에 전송한 뒤의 평균 광 신호대 잡음비는 C/L-band에서 각각 20.5 dB, 21.9 dB 였고, 최저 Q-factor는 C/L-band에서 각각 14.65 dB(BER=5.8E-8), 13.75 dB(BER= 5.0E-7)였다. 이 결과에 Reed-Solomon (255, 239) Forward Error Correction(FEC) 코드 기능을 사용하여 무오류 전송 결과를 얻었다.