• Coupled systems mechanics
• /
• 제10권2호
• /
• pp.103-121
• /
• 2021

The present research deals with the investigation of the effect of hall current in an orthotropic magneto-thermoelastic medium with two temperature in the context of multi-phase-lag heat transfer due to thermomechanical sources. The bounding surface is subjected to linearly distributed and concentrated loads(mechanical and thermal source).Laplace and Fourier transform techniques are used to solve the problem. The expressions for displacement components,stress components and conductive temperature are derived in transformed domain and furtherin physical domain with the help of numerical inversion techniques. The effect ofrotation and hall parameter hasshown with the help of graphs.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.97-108
• /
• 1996

A modeling technique is proposed for dynamic simulations of OHC valve trains with HLA(hydraulic lash adiuster). HLA is expressed by an air-oil mixture model considering HLA leak-down and aeraton effects. A compact nonlinear equation is derived which describe the short term dynamic behavior of the HLA. Valve spring is analyzed by a distributed parameter model including nonlinear characteristics in the spring surge phenomena. Global behavior of the remaining valve train is expressed by a lumped mass model. The experiental results prove that the simulation model developed here is accurate and useful for the dynamic simulations of OHC valve trains with HLA.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.324-328
• /
• 2005

This study is to figure out uncertainty relationship between input data and calibrated parameter on unsteady hydraulic routing model. The uncertainty would be present to model results as a variant water surface profile along the channel. Firstly, Manning's n is calibrated through the model with assumed uncertainty on input hydrograph. Then, spatially distributed n-values sets based on the calibrated n values are used to get water profile of each n-values set. The results show that ${\pm}0.002$ of error in Manning's n cause ${\pm}30cm$ of maximum water surface differences at the Sumjin river.

• 한국습지학회지
• /
• 제12권1호
• /
• pp.51-61
• /
• 2010

기후변화로 인하여 국지성 집중호우가 크게 늘어나고 그로인해 막대한 인적 및 물적 피해를 야기하고 있다. 따라서 강우의 시간적 공간적 특성을 파악하는 것이 중요하다고 할 수 있다. 본 연구에서는 레이다 강우를 이용하여 시공간적 변동성을 고려한 격자형 면적강우량을 산정하기 위하여 추계학적 방법인 칼만필터 기법을 이용하여 지상 강우 관측망과 레이다 강우 관측망을 조합하여 면적강우량을 산정하였다. 또한 전통적인 지상 강우량을 면적강우량으로 전환하는 기법인 Thiessen법, 역거리법, 크리깅 기법을 이용하여 면적강우량을 산정한 후 칼만필터 기법에 의해 보정된 면적 레이다 강우와 비교하였다. 그 결과, 칼만필터 기법에 의해 보정된 레이다 강우는 실제 강우 분포와 유사한 공간분포를 가지는 원시 레이다 강우 분포를 잘 재현하면서도 강우 체적은 우량계 자료의 체적과 유사하게 나타났다. 그리고 안성천 유역을 대상유역으로 선정하여 칼만필터 기법에 의해 보정된 레이다 강우를 물리적 기반의 분포형 모형인 $Vflo^{TM}$ 모형과 준분포형 모형인 ModClark 모형에 적용하여 홍수유출을 모의하였다. 그 결과, $Vflo^{TM}$ 모형은 첨두시간과 첨두치가 관측 수문곡선과 유사하게 모의되었으며 ModClark 모형은 총 유출체적에서 좋은 결과를 나타냈다. 그러나 매개변수 검증에서는 $Vflo^{TM}$ 모형이 ModClark 모형보다 관측 수문곡선을 잘 재현하였다. 이를 통해 지상강우와 레이더 강우를 적절하게 조합하여 정확도 높은 면적강우량을 산정하고 분포형 수문모형과 연계하여 홍수유출모의를 실시할 경우 충분한 적용성을 가지고 있음을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.969-988
• /
• 2016

Vibration analysis of the beams on elastic foundation has gained the great interest of many researchers. In the literature, there are many studies that focus on the free vibration analysis of the beams on one or two parameter elastic foundations. On the other hand, there are no sufficient studies especially focus on the comparison of dynamic response including the bending moment and shear force of the beams resting on Winkler and two parameter foundations. In this study, dynamic response of the axially loaded Timoshenko beams resting on modified Vlasov type elastic soil was investigated by using the separation of variables method. Governing equations were obtained by assuming that the material had linear elastic behaviour and mass of the beam was distributed along its length. Numerical analysis were provided and presented in figures to find out the differences between the modified Vlasov model and conventional Winkler type foundation. Furthermore, the effect of shear deformation of elastic soil on the dynamic response of the beam was investigated.

• 대한산업공학회지
• /
• 제22권1호
• /
• pp.17-36
• /
• 1996

An economic two-stage screening procedure is presented when both lower and upper specification limits are given on the performance variable. A screening variable which is highly correlated with the performance variable is used first to decide whether an item should be accepted, rejected, or undecided. The performance variable is then used to classify the undecided items. The two variables are assumed to be jointly normally distributed. A cost model is constructed on the basis of six cost components; inspection costs of screening and performance variables and costs caused by type I and type II misclassification errors related with lower and upper specification limits. Optimal cutoff values on the screening variable are determined so that the average outgoing quality exceeds a prespecified level. Solution methods are provided for both known-parameter and unknown-parameter cases.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.166-175
• /
• 1999

This paper describes a design and performance evaluation of robust controller which overrides unstable motion and pulls out quickly after water entry of underwater vehicle dropped from aircraft or surface ship. We use 6-DOF equation for model of motions and assume parameter uncertainty to reflect the difference of real motion from modelled motion equation. we represent a nonlinear system with uncertainty as Takagi and Sugeno's(T-S) fuzzy models and design controller stabilizing them. The fuzzy controller utilizes the concept of so-called parallel distributed compensation (PDC). Finally, we confirm stability and performance of the controller through computer simulation and hardware in the loop simulation (HILS).

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.123-131
• /
• 2019

The present investigation is concerned with two dimensional deformation in a homogeneous nonlocal thermoelastic solid with two temperature. The nonlocal thermoelastic solid is subjected to inclined load. Laplace and Fourier transforms are used to solve the problem. The bounding surface is subjected to concentrated and distributed sources. The analytical expressions of displacement, stress components, temperature change are obtained in the transformed domain. Numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of angle of inclination and nonlocal parameter on the components of displacements, stresses and conductive temperature. Some special cases are also deduced from the present investigation.

• 한국압력기기공학회 논문집
• /
• 제18권2호
• /
• pp.61-68
• /
• 2022

Accurate evaluation of residual stress is important for stress corrosion cracking assessment. In this paper, electron beam welding experiment is simulated via finite element analysis and the sensitivity of the parameters related to the combined heat source model is investigated. Predicted residual stresses arecompared with measured residual stresses. It is found that the welding efficiency affects the size of the tensile residual stress area and the magnitude of maximum longitudinal residual stress. It is also found that the parameter related to the ratio of energy distributed to the two-dimensional heat source has little effect on the size of tthe tensile residual stress area, but affects the size of the longitudinal residual stress in the center of the weld.

• 전자공학회논문지S
• /
• 제35S권6호
• /
• pp.46-54
• /
• 1998

본 논문은 파라미터 불확실성을 갖는 비선형 시스템을 안정화하며, 폐루프 시스템의 외란감쇠에 대한 $L_{2}$ 이득 제한조건을 만족시키는 견실 퍼지 $H^{\infty}$ 제어기 설계기법을 제시한다. 불확실성을 갖는 비선형 시스템을 불확실성을 갖는 Takagi-Sugeno(T-S) 모델로 표현하고 병렬 분산 보상(PDC : parallel distributed compensation)의 개념을 이용하여 제어기를 설계한다. 파라미터 불확실성을 갖는 T-S 퍼지모델에 대한 감쇠율을 만족하는 폐루프 시스템의 안정성 조건과 Lyapunov 함수를 이용하여 외란감쇠 조건을 유도하고, 선형 행렬 부등식(LMI: linear matrix inequality)을 이용하여 견실 퍼지 $H^{\infty}$ 제어기가 존재할 충분조건을 구한다. 마지막으로 불확실성을 갖는 비선형 시스템에 대한 퍼지 $H^{\infty}$ 제어기 설계 예를 보인다.