• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.63-66
• /
• 2001

This paper aims at developing remote control system to control and monitor distributed various devices such as photovoltaic Inverter system through internet. TCP/IP (Transmission Control Protocol/Internet Protocol) and photovoltaic inverter system operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.219-224
• /
• 2002

This paper aims at developing remote control system to control and monitor distributed various devices such as UPS or photovoltaic inverter system through internet. TCP/IP(Transmission Control Protocol/Internet Protocol) and photovoltaic inverter system operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2691-2707
• /
• 2014

Medium access control is critical in wireless networks for efficient spectrum utilization. In this paper, we introduce a novel collision resolution method based on the technique of known interference cancellation, and propose a new MAC protocol named as CR-MAC, in which AP tries to decode all the collided data packets by combining partial retransmissions and known interference cancellation. As the collided transmissions are fully utilized, less retransmission is required, especially in a crowded network. The NS-2simulation and MATLAB numerical results show that, under various network settings, CR-MAC performs much better than the IEEE 802.11 DCF in terms of the aggregation throughput and the expected packet delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1746-1755
• /
• 1996

In this paper, we propose the protocol stact and the server functions of IWU which interconnects distributed LAN's users by using of B-ISDN. The protocol stact of interconnecting IWU under consideration users TCP/IP in upper layer. TCP/IP is popular communication protocol in interconnecting distributed LANs. The interconnecting IWU has server functions for transfering datagrams to B-ISDN such as address translation, fragment and reassembly, CL server, signalling and traffic control. We analyze the performance ofinterconnecting IWU with M/M/1/K queueing model and obtain the throughput and buffer size of interconnecting IWU.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2259-2266
• /
• 2016

Recently dense wireless local area networks (WLANs) emerge as the number of WLAN cells and stations increases. In such dense WLAN environment, this paper proposes a new distributed medium access control (MAC) protocol. The proposed MAC protocol extends the previous CSMA with collision resolution (CSMA/CR) that uses a single collision detection (CD) phase and employs multiple CD phases to resolve more collisions. It checks the collision detection in each CD phase and stops the CD phase if consecutive non-detected CD phases occur more than the threshold. Therefore, the proposed protocol can control the number of CD phases adaptively according to the number of accessing stations and increase the probability of collision resolution while decreasing the packet overhead. The simulation results show that the proposed adaptive CSMA/CR protocol employs a variable number of CD phases according to the number of stations and achieves a greater throughput than the previous CSMA/CR protocol using the fixed number of CD phases.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.353-358
• /
• 2014

In the past, security on control system was guaranteed by isolation of control system networks from external networks. However as devices of the control systems became more various and interaction between the devices became necessary, effective management system for such network emerged and this triggered connection between control system networks and external system networks. This made management of control system easier but also made control system exposed to various cyber attack threats, Therefore researches on appending security measures on each protocols are in progress. This paper focused on DNP(distributed network protocol)3 protocol which is used for communication between control center and substations. It describes characteristics of DNP3 protocol and research on adding security elements to the protocol. It also analyzed known vulnerabilities of DNP3 protocol and proposed data mining methodology for detecting such vulnerabilities.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.302-308
• /
• 2006

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-Induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build such a system, the TCP/IP-CAN Gateway which convert a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN Gateway in remote place and a command PC ti be connected ti Ethernet.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.118.1-118
• /
• 2002

Recent trends in internet access to the device network require that information be provided from anywhere in the enterprise. One then needs to integrate both device network protocol and data network protocol to realize Virtual Device Network (VDN). Interoperability between devices and equipments is essential to enhance the quality and the performance of VDN. LonWorks technology is incorporated as device network protocol for interoperability. VDN integrating both device network and data network has varying time delay. Inherent varying time delay of VDN can significantly degrade the reliability of Distributed Control System. This study investigates the transmission characteristics of VDN and s...

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.