• Korean Journal of Cognitive Science
• /
• v.24 no.4
• /
• pp.365-391
• /
• 2013

Negative repetition effect (NRE) refers to the phenomenon that the accuracy of report is impaired when a target was flanked by the same distractor than when by alternative distractor. To probe the nature of NRE, this study introduced attention window(s) indicating the positions where a target might be presented, and non-attention window(s) where a target could not be presented. Attention windows are supposed to help participants detect targets readily. Two among three positions are indicated by attention windows in Exp. 1, and a single large attention window encompassing central two positions among four positions was used in Exp. 2, and either large or small attention window was used depending on the number of target candidates in Exp. 3. In the result of three experiments, NREs were consistently observed when both positions of a target and a distractor were indicated by previous attention windows. However, NREs (including its tendency) and its opposite, PREs were observed when a distractor was presented in the non-attention position, depending on its distance from the target and the size of attention window. It seems that this pattern of repetition effects is hard to be explained by repetition blindness hypothesis (Kanwisher, 1991), positional uncertainty hypothesis (Keren & Boer, 1985), and inhibitory attention capture hypothesis (Kwak et al., 1993). Instead it was proposed that shifting of spatial attention should be considered accordingly with the structure of stimulus display. The promising role of this task was discussed in studying the relation of attention and perception.

• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.2
• /
• pp.71-79
• /
• 2005

Purpose: Maxillary hypoplasia is a common developmental problem of cleft lip and palate. Fair results with distraction osteogenesis have been reported especially when these patients need a large amount of maxillary advancement, instead of orthognathic surgery. The purpose of this study is to evaluate the clinical results with a relatively new distractor, $TS-MD^{(R)}$ (Trans-sinusoidal maxillary distractor, KLS Martin, Tuttlingen, Germany) which was used for the advancement of the maxilla in the cleft patients. Patients and Method: Distraction osteogenesis using $TS-MD^{(R)}$ was performed for four CLP patients (three males and one female) who had maxillary hypoplasia. All patients were over 16 years old. As three patients showed mandibular prognathism as well, bilateral sagittal split ramus osteotomy for mandibular setback was performed at the same time. After consolidation periods of 4 to 12 weeks, the distraction devices were removed and miniplates were placed for simultaneous internal fixation. Results: Three patients showed a large amount of incisal overbite but one patient did not have sufficient maxillary advancement. Le Fort I osteotomy, maxillary advancement and internal fixation should have been performed for the patient when removing the distraction devices. Different from the $clinician{\box}s$ expectation, the amount of maxillary advancement using $TS-MD^{(R)}$ was not sufficient, although the device has rigid mechanical property. Rotation of maxilla during distraction forward and downward was also observed. Conclusion: Even though the maxillary advancement with $TS-MD^{(R)}$ device could be achieved, the clinical control of some characteristics related with the device was necessary. More clinical studies on $TS-MD^{(R)}$ should be performed.

• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2005

Patients with cleft lip and palate usually show up maxillary hypoplasia. In these cases, a large amount of maxillary advancement is often needed to correct the severe deformity, but local soft-tissue scars around the maxilla restrict maxillary advancement and increase the relapse rate. Maxillary distraction osteogenesis is an effective method for facial and occlusal improvement in these patients. By gradually lengthening both the bones and the soft tissues, distracted midface can greatly increase postoperative stability and decrease the relapse rate. However, the maxillary extraoral appliances of the early days used were esthetically unappealing as well as difficult for the patient to manage. Recently, more inconspicuous intraoral distraction appliances have been developed and used with success. We acquired favorable result in two patients(bilateral 1 patient and unilateral 1 patient) with severe maxillary hypoplasia secondary to complete cleft lip and palate were treated with midface distraction using internal distractor (Zurich Pediatric Maxillary Distractor, KLS Martin, Tuttlingen, Germany). So, we report our experience with literatures.

• Proceedings of the KSPS conference
• /
• 2002.11a
• /
• pp.165-168
• /
• 2002

This research was conducted to investigate the priming effect in Korean and English word production by Korean speakers. Picture-naming with distractors was used as experimental task. The type of target language, the type of distractor language and SOA(Stimulus Onset Asynchrony) were used as variables. Cross-linguistic priming effect and within-linguistic priming effect were mesured to investigate bilinguals' conceptual system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.225-231
• /
• 2008

This study evaluated whether there is a difference between a conventional titanium distraction device and a TiN-coated device in terms of implant osseointegration after horizontal distraction osteogenesis in narrow alveolar bone. Four adult mongrel dogs, each weighing $9{\sim}10kg$, were used in this study. The lower premolars were extracted and horizontal distraction was performed with conventional titanium distraction devices (group 1) or TiN-coated devices (group 2). After an 8-week consolidation period, the implants were installed, and the dogs were sacrificed after another 8 weeks. The osseointegration around the implants was evaluated histomorphologically. There was one failure in experimental group 1 because of fracture of the device. Direct bone contact was achieved and there were no significant differences between the control group and experimental groups 1 and 2 in terms of osseointegration around the implants at 8 weeks. In summary, intraoral distraction osteogenesis is a good option for augmenting severely atrophied alveolar ridges, and the TiN-coated device may be useful because of its advantages, which include surface hardness, corrosion resistance, and reduced bacteria.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.3
• /
• pp.242-246
• /
• 2006

Objective : This is to report the criteria of success of intraoral distraction osteogenesis for alveolar augmentation in the severely atrophied alveolar defects through clinical result of 2 cases. Subjects and Methods : Anterior segmental osteotomy was performed and alveolar distractors (Martin and Leibinger, Germany) were applied each in 2 patients with severely defected anterior maxillary area. The osteomized alveolar segments were distracted by 1mm a day after latency period. After the consolidation period implants were installed with removal of distractor. The implants were evaluated clinically and radiographically. Results : In Case I, the distracted bone was directed to the palatal side, and another augmentation treatment - block bone graft, guided bone regeneration - was needed. In Case II, the successful alveolar bone augmentation was achieved. Dental implant was placed on distracted alveolar bone, and showed good osseointegration and good function without any complication. Conclusion : Distraction osteogenesis can be a good choice for alveolar ridge augmentation of severely atrophied ridges. However, the anterior esthetic prosthetics relies on the control of the vector, the kind of distractor, the healing capacity of patient and the etiology of atrophy. Therefore another study of each category would be needed.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.445-449
• /
• 2009

Purpose: A successful surgical treatment for a wide alveolar cleft with bone graft is difficult to achieve due to several factors such as the limitation of gingivoperiosteal flap, the presence of large scar tissues, and the poor blood circulation. To overcome these problems, alveolar distraction osteogenesis using Liou alveolar distraction device was applied. We analyzed the consequences of this surgical treatment. Method: Between 2006 January and 2007 August, we have conducted analysis on the methods and consequences of Liou alveolar distraction osteogenesis for 6 patients. The age of patients was 12 years and 6 months in average. The follow up period was 19 months in average. The Reverse L osteotomy followed by the placement of the Liou alveolar distraction device was performed. After serial distraction, the distractor was removed after 5 months of the process of osteogenesis, and the result was analyzed using the computed tomography and the x-ray films of the alveolar bone and the teeth. Results: The alveolar cleft with 12.5 mm in average width was filled with 8.5 mm of newly formed bone tissue in average width after 5 months of osteogenesis. Among the 6 cases, 5 required the additional bone graft and 1 case only required the gingivoperioplasty. The newly formed bone tissues did not show any signs of bone resorption. However, a considerable degree of teeth displacement was shown. Conclusion: For the alveolar cleft too wide to be reconstructed by a general bone graft, it is strongly recommended to perform the reverse L osteotomy of the cleft side with Liou alveolar distraction device to initiate the alveolar osteogenesis. However, the migrated teeth showed some degree of relapse, thus, the orthodontic treatment is essential following the distraction osteogenesis treatment.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.45-51
• /
• 2019

Purpose: The clinical and radiological results of patients with type 3 talar neck fractures treated with the anteromedial approach using medial malleolar osteotomy and large distractor were analyzed retrospectively. Materials and Methods: From March 2009 to August 2016, 12 patients with a type 3 talar neck fracture, who underwent the anteromedial approach using a medial malleolar osteotomy and large distractor and who could be followed-up for more than 12 months after the operation, were examined. The patients were examined for the presence of Hawkins signs by anteroposterior and lateral radiographs and osteonecrosis by magnetic resonance imaging (MRI) on the postoperative 3 months. Subsequently, every 3 months, radiographic union was assessed by a simple radiograph and clinical symptoms. Twelve months postoperatively, posttraumatic arthritis was assessed and the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score was analyzed. Results: In 7 cases, osteonecrosis was found on MRI performed 3 months after surgery. On the other hand, at the 12 months follow-up, all of them obtained AOFAS scores of 83.86±4.53 without surgical treatment. Radiographic union was achieved in all cases. The mean union period was 5.3 months. In 10 cases, traumatic arthritis was found after the radiographical and clinical evaluation. In addition, all of them could carry on everyday life by conservative treatment. The AOFAS ankle-hindfoot score was measured to be 85.17 on average. Other complications included superficial wound infection in 2 cases. Conclusion: An anteromedial approach using a medial malleolar osteotomy and a large distractor in the surgical treatment of patients with type 3 talar neck fractures can achieve anatomical reduction of the displaced fragment without a lateral dissection. This is considered to be another good surgical option.

• The korean journal of orthodontics
• /
• v.41 no.1
• /
• pp.59-69
• /
• 2011

The aim of this report is to present the treatment of a 14-year-old boy with scissors-bite. Mandibular symphyseal distraction osteogenesis (MSDO) with tooth-supported distractor was performed to expand the mandible, and intermaxillary cross elastics were used. The mandible was expanded approximately 9 mm. Asymmetric widening was done by using cross elastics and MSDO simultaneously. The buccal crossbite was corrected successfully. After a 2-year observation period, widening of the mandible using this procedure was judged to be stable.

• Korean Journal of Cognitive Science
• /
• v.22 no.4
• /
• pp.469-494
• /
• 2011

It is well known that visual objects belonging to the same perceptual category compete for category-specific, limited-capacity attentional resource. However, it remains to be seen how perceptually identical objects interact with each other during visual analyses. Perceptually identical objects might suppress each other as much as categorically identical objects do. Alternatively, they might cooperate to generate a perceptual representation which is long lasting and robust to noise. Such possibilities were tested in the current research with three behavioral experiments using the Stroop task. As results, relative to a single distractor, Stroop interference was diluted by two different distractors of a category while it was enhanced by two perceptually identical distractors (Experiment 1). This redundancy effect disappeared when two different distractors associated with the same response were presented (Experiment 2), and it was not affected by the between- vs. within-hemisphere distractor presentations (Experiment 3). These findings indicate that the redundancy effect of distractors may be mediated by perceptual representations based on hemisphere-independent attentional resources. Overall, the current study supports the hypothesis that Stroop interference is constrained by category-specific attentional resources and further suggests that redundant presentations of a stimulus overcome such attentional constraints by facilitating perceptual processing.