• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.178-182
• /
• 2007

In this study, we evaluated current raingauge network of Soyanggang dam region applying spatial-correlation analysis and Entropy theory to recommend an optimized raingauge network. In the process of analysis, correlation distance of raingauge stations is estimated and evaluated via spatial-correlation method and entropy method. From this correlation distances, respective influencing radii of each dataset and each methods is assessed. The result of correlation and entropy analysis has estimated correlation distance of 25.546km and influence radius of 7.206km, deducing a decrease of network density from $224.53km^2$ to $122.47km^2$ which satisfy the recommended minimum densities of $250km^2$ in mountainous regions(WMO, 1994) and an increase of basin coverage from 59.3% to 86.8%. As for the elevation analysis the relative evaluation ratio increased from 0.59(current) to 0.92(optimized) resulting an obvious improvement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.55-61
• /
• 1991

The accidential errors of horizontal angles are influenced by sighting, reading and eccentric errors etc. This paper deals with the influence of eccentric error by the formula of theory and evaluation, and actually testing measurement. The results show that the eccentric error is calculated through the sighting distance, observed angle, eccentric distance and angle. And then, three repeating method is of practical use, and also, eccentric error is able to evaluate through the sighting distance and observed angle in according to performance of each instrument.

• Communications for Statistical Applications and Methods
• /
• v.14 no.1
• /
• pp.229-239
• /
• 2007

We present a diagnostic method for the quasi-likelihood estimators in generalized linear models. Since these estimators can be usually obtained by iteratively reweighted least squares which are well known to be very sensitive to unusual data, a diagnostic step is indispensable to analysis of data. We extend the local influence approach based on the maximum likelihood function to that on the quasi-likelihood function. Under several perturbation schemes local influence diagnostics are derived. An illustrative example is given and we compare the results provided by local influence and deletion.

• Journal of Korea Game Society
• /
• v.7 no.4
• /
• pp.117-123
• /
• 2007

This paper presents the Stone Influence, the Influence Point, and the Influence Area on computer Go. The Stone Influence is defined using the distance between stone and empty point. The Influence Point is defined using threshold value on the Stone Influence. The Influence Area is defined using lump of the Influence Points and its Core. In experiments using the Jeongseok data, the author obtained the threshold of Influence Points. The proposed method was verified by experiments where it was success fully applied to the influence in game of Go.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.430-434
• /
• 2004

The geometric parameters between wheel and rail change wheel/rail contact geometry characteristics, and this influence dynamic behavior of rolling stock. So, the selections of optimum geometric parameters between wheel and rail is important for planning of railway system. In this study, we have analyzed the influence of geometric parameters like wheel flange-back distance, gage, and rail inclination to the equivalent conicity relating dynamic behavior. The analyses show the following results. The widening of wheel flange-back distance increase the equivalent conicity, the widening of gage, rail inclination 1/20 compared with rail inclination 1/40 decrease the equivalent conicity.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.67-73
• /
• 2012

Local color transfer is the process of assigning a given color to a local region in a target image. The local region that contains the given color has to be segmented. Conventionally, the segmentation of the corresponding local region in a target image is based on the color distance. The region which is the closest in color distance is separated. However, since the close range of color distance separating a given color from target image is ambiguous and uncertain, color distortion is often generated around a separated local region. Therefore, this paper addresses the problem of segmentation in a local color transfer. To prevent color distortion, a modified color influence map is proposed with color categories. First, the target image is roughly segmented using a color category map, which groups similar colors in color space. It restricts the color transfer to a specific color category according to a given color. Second, modified color influence map assigning different weight to lightness and chroma, respectively, is used instead of Euclidian color distance. Then, by combining a modified color influence map and color category map filtered with anisotropic diffusion, a local region that contains a given color can be segmented more strictly than conventional method.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.127-132
• /
• 2008

Wireless sensor network technologies applicable to various industrial fields are rapidly growing. Because it is difficult to change a battery for the once distributed wireless sensor network, energy efficient design is very critical. In order to achieve this purpose in network design, a number of studies have been examining the energy efficient routing protocol. The sensor network consumes energy in proportion to the distance of data transmission and the data to send. Cluster-based routing Protocols such as LEACH-C achieve energy efficiency through minimizing the distance of data transmission. In LEACH-C, however, the total distance between the nodes consisting the clusters are considered important in constructing clustering. This paper examines the cluster-head-selection-algorithm that reflect the distance between the base station and the cluster-head having a big influence on energy consumption. The Proposed method in this paper brought the result that the performance improved average $4{\sim}7%$ when LEACH-C and the base station are located beyond a certain distance. This result showed that the distance between cluster-head and the base station had a substantial influence on lifetime performance in the cluster-based routing protocol.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.27-32
• /
• 2005

Electron is used for the treatment of skin cancer, breast cancer, and head and neck cancer in clinic. Our study is performed to check the isodose distribut ion in source surface distance(SSD) and source bolus distance(SBD) setup, nipple influence to isodose distribution of electron, junctional area isodose variation of photon and electron field. Dosimetry is carried out with phantom, acryl, and film as the same condition of treatment setup. $8\%$ of isodose difference is noted with the surface distance(SSD) and source bolus distance(SBD) setup. To reduce the influence of nipple. corresponding volume of bolus should be removed. And bolus covering all the electron field reduced hot and cold spot of junctional area of photon.

• Geomechanics and Engineering
• /
• v.15 no.6
• /
• pp.1193-1205
• /
• 2018

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.101-107
• /
• 2007

The objective of this research work is to investigate into effects of an auto tracking of the focal distance on the quality of the cut part in the cutting of a low carbon sheet using a high-power CW Nd:YAG laser. An auto-tracking system with a capacitance based distance control loop has been employed to perform a real control of the focal distance. In order to examine the influence of the auto-tracking of a focal distance on the optimum focal distance, the kerfwidth, surface roughness and the formation of the cut section, several linear cutting tests have been carried out using the auto-tracking system. The results of experiments have been shown that the optimum focal distance is 0.9mm. In addition, it has been shown that the variation of kerfwidth and the surface roughness of the cut part with control of the focal distance are reduced 40-80% and 30-55% in comparison with those of the cut part without tracking of the focal distance. From the results of the experiments, it has been found that the real time tracking of the focal distance can improve the part quality.