• 한국멀티미디어학회논문지
• /
• 제23권11호
• /
• pp.1383-1387
• /
• 2020

Recently, a 4-col 7-row LED Screen that provides various information of major roads and local governments has been installed and operated. However, due to deterioration due to changes in temperature and humidity, deterioration due to static electricity, and mechanical stress, partial module failure of the display may occur, which is a major cause of missing information of vitally given to citizens. However, there have been frequent cases where the 4-col and 7-row LED Screen that have failed due to reasons such as installed location where the signboards are installed on the road and outdoor, the lack of monitoring means at all times, and the lack of manpower is often neglected for a long time. Following this flow, this paper proposes a method to detect defective modules by analyzing the images collected through the camera fixed to the front part of the LED display.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1175-1180
• /
• 2002

본 논문은 DARC 정보를 수신하여 실시간 정보와 사용자 정보를 표시하는 전광판을 차량용에 사용할 수 있도록 GPS모듈을 연결하여 위치 기반 정보를 표시할 수 있는 전광판을 구현하였다. GPS는 DARC모듈로부터 DGPS 정보를 수신하여 값의 정확성을 높이고 이러한 GPS 정보를 사용하여 위치 기반의 정보를 음성 및 전광판에 표시할 수 있게 했다. 본 시스템은 실험을 통해 사용자 메시지 및 DARC 정보 데이터와 정류장을 순서대로 표시하는 것을 확인하였다. 이는 대중 교통 수단에서 승객들에게 유용한 정보를 사용자 정보와 함께 제공함으로써 전광판의 효율을 높일 수 있게 된다.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.1-9
• /
• 2016

The warpage on mobile phone camera packages occurs due to the CTE(Coefficient of Thermal Expansion) mismatch between a thin silicon die and a substrate. The warpage in the optical instruments such as camera module has an effect on the field curvature, which is one of the factors degrading the optical performance and the product yield. In this paper, we studied the effect of die bonding epoxy on the package and optical performance of mobile phone camera packages. We calculated the warpages of camera module packages by using a finite element analysis, and their shapes were in good agreement showing parabolic curvature. We also measured the warpages and through-focus MTF of camera module specimens with experiments. The warpage was improved on an epoxy with low elastic modulus at both finite element analysis and experiment results, and the MTF performance increased accordingly. The results show that die bonding epoxy affects the warpage generated on the image sensor during the packaging process, and this warpage eventually affects the optical performance associated with the field curvature.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.45-49
• /
• 2018

Portable microcontroller based measurement unit is demonstrated using digital-to-analog convertor module, analog-to-digital convertor module and additional preamplifier circuit with low-budget but excellent performances. Using the designed measurement unit, the measurement of current below 1 nA with applying voltage up to 5 V is successfully carried out. With the WiFi module in microcontroller, measured data is transferred to the user's computer. To evaluate the performance of the measurement unit, the transfer curve of a commercial N-type field effect transistor was measured with the measurement unit and the results is well consistent with that measured using commercial characterization system.

• 한국광학회지
• /
• 제32권1호
• /
• pp.15-21
• /
• 2021

본 논문에서는 LED 광원 모듈과 시준용 프레넬 렌즈를 이용하여 항공기 장애등 광학 시스템을 설계하였다. 설계된 광학계는 국토 교통부 항공기 경고등의 수직 양각 중심 광도 20,000 cd와 발산각 광도 규격 조건을 만족시키기 위해 프레넬 렌즈를 모듈별로 설계하였다. 또한 LED 광원 모듈과 프레넬 렌즈의 위치와 기울기를 조정하여 광학 시스템을 최적화하였으며, 이렇게 설계된 광학계의 배광 특성을 분석하고 비교하여 최적의 성능을 가진 항공기 경고등 광학계를 설계하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.221-224
• /
• 2003

Recently, the market share of the thin-film-transistor liquid-crystalline-display (TFT-LCD) is growing rapidly in display device market. The backlight unit is used as a light source of TFT-LCD module. A light-guide is one of several important components of backlight unit. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. The result of this test, V-groove pattern shows different shapes depends on the temperature of mold surface, contact time of mold and depth of V-groove.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1053-1056
• /
• 2004

Chunghwa Picture Tubes, LTD. (CPT) has developed a Novel TFT-LCD Driving Techniquel. This new technique is developed in combination with other state-of-the-art image processing solutions such as image compression / decompression, motion detection, and noise reduction. By applying the Novel Driving Technique to the high resolution TFT-LCD, it was found that the response time can be effectively reduced with a lower overall system cost by smaller frame memory requirement, lower EMI by less memory band-width. Likewise, higher display quality can also be achieved in that the unexpected noises generated by over-drive can be eliminated. The Novel TFT-LCD Driving Technique has been successfully implemented to the 30 inch WXGA (1280${\times}$768) resolution TFT LCD commercial TV module. It was found that the quality of moving picture was better improved compared with that of the conventional fast response driving method.

• Korea-Australia Rheology Journal
• /
• 제15권4호
• /
• pp.167-171
• /
• 2003

The backlight unit (BLU) is used as a light source of TFT liquid-crystalline-display (TFT-LCD) module. In this backlight unit, one of important components is the light guide, which is usually made of transparent polymers. Currently, the screen-printing method is mainly used for the light guide as a manufacturing process. However, it has limitation to the flexibility of three-dimensional optical design. In the present paper a new alternative manufacturing method for the light guide with low-cost is proposed. This manufacturing method is named as direct surface forming (DSF), which is very similar to the well-known hot embossing except for partial contact between mold and substrate. The results of this new manufacturing method are presented in terms of processing condition, dimensional accuracy, productivity, etc.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.25-31
• /
• 2007

본 논문에서는 질감제시장치와 진동모터를 내장한 펜형 햅틱(haptic) 인터페이스에 대해서 기술한다. 본 연구의 목적은 다양한 장치에 적용할 수 있는 소형 질감제시 모듈을 제안하고, 개발된 모듈을 펜과 같은 모양의 인터페이스에 내장하여 그 성능을 검증하는데 있다. 본 연구의 수행을 위해 핀배열을 내장하고 있으며, 저전력, 저소음으로 동작하며, 수직방향으로 1mm이상의 변위를 일으키는 소형 질감제시 모듈을 개발하였다. 그리고 개발된 모듈은 PDA나 Tablet PC등에서 흔히 사용되는 스타일러스(Stylus)와 같은 펜모양의 인터페이스에 내장되었다. 펜형 인터페이스의 헤드부분에는 팬케익 모터를 내장하여 사용자에게 진동 촉감을 제공할 수 있도록 하였다. 개발된 펜형 인터페이스의 성능을 검증하기 위하여Mobile Tablet PC상에서 내장된 질감제시 모듈이 점자정보를 촉감으로 전달할 수 있는지에 관한 실험을 수행하였으며, 모든 실험은 그래픽 사용자 인터페이스(GUI)상에서 이루어졌다. 또한 모든 버튼 조작시 '클릭'하는 느낌을 재현하였다. 실험은 동시에 다양한 자극의 주파수와 시간의 변화 조건에서 시행되어 의도하는 촉감을 가장 잘 전달하는 자극방법에 관한 연구를 동시에 수행하였다. 또한 개발된 펜형 인터페이스를 이용하여 이미지와 함께 데이터 베이스화 되어있는 질감을 재현할 수 있는 방법에 관한 기초 연구를 수행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.251-254
• /
• 2005

A new driving waveform was proposed to reduce the cost in PDP-TV based on Vt close curve by eliminating the common (X) board under the conventional 42-inch panel structure. Due to the serious misfiring problem during a sustain-period when applying the new driving waveform, the wall voltage was measured and analyzed after the reset-period using Vt close curve. As a result of adopting the proposed driving waveform designed using Vt close curve analysis, the cost of PDP module could reduce compared with the conventional PDP module without any misfiring discharge.