• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.679-682
• /
• 2003

We report the suitable SLS (sequential lateral solidification) as a function of laser intensity. Precursor film is changed from 50nm to 100nm and is deposited on glass substrate by PECVD. We can find the suitable SLS length by changing the mask size. In this paper, we present the well-defined grain growth conditions as a function of laser intensity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.932-934
• /
• 2003

For the insulator of inorganic thin film electroluminescent (TFEL), devices AlON combined with TiON was used and it exhibits higher luminance than AlON as well as $Al_{2}O_{3}$ insulator. Furthermore, using AlON with TiON film show better stability and higher luminance than that with $TiO_{2}$ grown by conventional atomic layer deposition (ALD) for the application of the insulator of ZnS:Mn TFEL device.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.88-96
• /
• 2015

The purpose of this study is to design an authoring tool and a corresponding device for an olfactory display that can augment the immersion and reality in broadcasting services. The developed authoring tool allows an olfactory display to be properly synchronized with the existing video service by applying the standardized format using ISO/IEC 23005 (MPEG-V) and the corresponding developed scent display device. To propose the proper data format for the olfactory display, we have analyzed both the multimodal combination and the cross-modality related to the olfactory display. From the results of the analysis, we derived a set of olfactory parameters for the olfactory display that are related to emotion. The analyzed parameters related to emotion in an olfactory display are synchronization, scent intensity, scent persistence, and hedonic tone. These parameters should be controlled so that the olfactory display can be in harmony with the existing media to augment emotion. In addition, we developed a scent display device that can generate many kinds of scents and that satisfies design conditions for olfactory parameters that are for use with broadcasting services.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.168-176
• /
• 2014

This paper presents an engine oil change warning algorithm based on the test results of a small dip-stick-gage-type engine-oil-deterioration-detection sensor, software to realize the algorithm and a display device to apply the software. The algorithm determines the engine oil deterioration condition from the rate of change in the dielectric constant based on the average measured capacitance at $80^{\circ}C$ after the engine stops. The rate of change in the dielectric constant at the time for oil change correlates with the time that one of recommended warning limits for engine oil physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity is first reached. At this point, a warning signal for oil change appears on the display device like a smart-phone or individual display device. The frames of smartphone app have three stages. The user can directly input all of the thresholds into the frame of the smartphone app. The screen of the display device comprises one frame for each warning signature with the related message. The user can input the thresholds to the device through a USB cable connected to a personal computer.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.911-912
• /
• 2006

The recent growth in the portable display industry has been dominated by flexible display, moreover, several developing of using LCD technology has been in making the flexible display work effectively, however flexible device is not practical. Recently, the study on the multi-display screen has been published as the needs of larger screen in mobile device has been increased. The multi-display screen which is composed of two LCD panels, has the characteristics of the seamless gap between two panels. To meet the needs of this multi-display, in this paper, the study is performed to design the seamless device which consist of LCD panels, light film, back light and driver, and finally, we evaluated the effectiveness of seamless folding mechanism.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.445-450
• /
• 2005

In this paper, we suggest an integrated tactile display system that provides kinesthetic force, pressure distribution, vibration and slip/stretch. The system consists of two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to the skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate the characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device, using eight piezoelectric bimorphs and a linear actuator, Is implemented and attached to a 2 DOF translational force feedback device to simultaneously simulate the texture and stiffness of the object. As a result, we find out that the capability of the suggested device is sufficient to display physical quantities to display the texture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.38-41
• /
• 2009

We demonstrate a new commercial green phosphorescent organic light emitting device (OLED) in a bottom emission device and top emission microcavity. The bottom and top emitting phosphorescent OLEDs (PHOLED$^{TM}$s) had luminance efficiencies of 60cd/A and 137cd/A respectively, at a luminance of 1,000cd/$m^2$. The top emission microcavity was close to 1953 NTSC color requirements with 1931 CIE color coordinates of 0.231, 0.718. A record green PHOLED lifetime of >3,500hrs to LT95 from 4000cd/$m^2$ is demonstrated for the microcavity device.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.8
• /
• pp.592-599
• /
• 2003

As one of the Principal modalities of human sensation, tactile feel is prerequisite for building wide variety of applications such as telemanipulation, virtual reality and medical engineering. A dynamic Braille display device based on a polymer actuator is presented. The actuator, often called artificial muscle actuator has advantageous features over the existing methods in terms of intrinsic softness, ease of fabrication, cost-effectiveness and miniaturization. The principles of actuation with dielectric elastomer is introduced, and necessary considerations on the design of a tactile display device are discussed. The design of the device is described in detail including the fabrication process and driving electronics. Also, preliminary results of experiments are given to evaluate its performance.

• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design