• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.53-59
• /
• 2018

본 논문에서는 재활용 필름을 사용한 친환경 그리드형 보강재와 사전에 충진재의 혼입을 통해 분산성을 향상시킨 섬유를 도로 포장층에 복합적으로 적용한 공법의 현장 적용성을 분석하였다. 그리드형 보강재를 구성하고 있는 필름은 폐기된 PE수지를 재활용하여 친환경성을 강조하였고, 아스콘 혼입 섬유는 아스콘 충진재의 사전 혼입을 통한 섬유의 분산성을 확보한 것이다. 복합 섬유를 혼입한 교량 포장층을 시공함에 있어 발생할 수 있는 제반 상황을 사전에 인지할 수 있도록, Mock Up 포장층에 대한 기본적인 성능 분석을 실시하였다. 분석 결과, 친환경 그리드 보강재와 분산성 섬유를 함유한 포장층에서 강도 및 응력, 처짐 저항성에서 모두 기능성이 향상된 것을 확인할 수 있었다. 그러므로, 섬유 실제 현장 적용시 친환경성 재료 도입과 더불어 안전성 측면에도 효율적인 공법이라고 판단된다.

• 한국광물학회지
• /
• 제24권3호
• /
• pp.225-234
• /
• 2011

2009년 3월 17일 채집된 황사 총시료(TSP)의 개별 입자에 대하여, 고분해 주사전자현미경 및 에너지분산 X선 분광분석을 이용한 광물학적 특성 및 혼합상태 분석을 실시하였다. 황사 입자들 중, 석영, 사장석, K-장석, 각섬석, 흑운모, 백운모, 녹니석, 방해석 등은 비교적 조립질 입자로 산출되며, 이들 입자는 앓은 극미립 일라이트질 점토광물 층으로 피복되어 있다. 극미립 점토광물 입자들은 또한 개별 점토 덩어리를 형성한다. 조립질 방해석 외에 나노섬유 방해석들이 개별적으로 또는 집합체로 큰 입자를 피복하거나 점토광물과 함께 덩어리를 형성한다. 입자의 주 광물에 따라 광물학적 분류를 실시하고 빈도를 구하였다. 이번 TSP의 단일입자 광물학적 특성 및 혼합상태는 기존의 $PM_{10}$ 분석 결과와 거의 차이가 없었다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.1-9
• /
• 2013

PURPOSES : About 35% of air pollutant is occurred from road transport. NOx is the primary pollutant. Recently, the importance of NOx removal has arisen in the world. $TiO_2$ is very efficient for removing NOx by photocatalytic reaction. The mechanism of removing NOx is the reaction of photocatalysis and solar energy. Therefore, $TiO_2$ in concrete need to be contacted with solar radiation to be activated. In general, $TiO_2$ concrete are produced by substitute $TiO_2$ as a part of concrete binder. However, 90% of $TiO_2$ in the photocatalysis can not contacted with the pollutant in the air and solar radiation. Coating and penetration method are attempted as the alternative of mixing method in order to locate $TiO_2$ to the surface of structure. METHODS : The goal of this study was to attempt to locate $TiO_2$ to the surface of concrete, so we can use the concrete in pavement construction. The distribution of $TiO_2$ along the depth were confirmed by basing on the comparison of $TiO_2$ compare by using the EDAX(Energy Dispersive X-ray Spectroscopy). RESULTS : $TiO_2$ were distributed within 3mm from concrete surface. This distribution of $TiO_2$ is desirable, since the $TiO_2$ induce photocatalysis are located to where they can be contacted with the air pollutant and solar radiation. CONCLUSIONS : Nano size $TiO_2$ is easily penetration in the top 3mm of concrete surface. By the penetration $TiO_2$ concrete can be produced with the use of only 10% of $TiO_2$, by comparing the mixing types.

• 전기화학회지
• /
• 제21권1호
• /
• pp.12-20
• /
• 2018

To solve low cycle efficiency of the zinc anode in Zn-air batteries by corrosion, this study examined the effects of Al as a cathodic protection additive to Zn. The Al-mixed Zn anodes were produced by mixing Zn and Al powder (1, 2, and 3 wt. %). To compare the effects of the Al additive, Si was selected under the same conditions. The morphology and elemental composition of the additives in the Zn were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, and inductively coupled plasma - mass spectrometry. The anti-corrosion effects of the Al and Si-mixed Zn anodes were examined by linear polarization. Cyclic voltammetry and charge-discharge tests were conducted to evaluate the electrochemical performance of the Al and Si-mixed Zn anodes. As a result, the Al-mixed Zn anodes showed highest corrosion resistance and cycling performance. Among these, the 2 wt.% Al-mixed Zn anodes exhibited best electrochemical performance.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.153-158
• /
• 2012

The hydrogenation of $AlB_2$-type BaGaGe exhibits a metal to insulator (MI) transition, inducing a puckering distortion of the original hexagonal [GaGe] layers. We investigate the electronic structure changes associated with the hydrogen-induced MI transition, using extended H$\ddot{u}$ckel tight-binding band calculations. The results indicate that hydrogen incorporation in the precursor BaGaGe is characterized by an antibonding interaction of $\pi$ on GaGe with hydrogen 1s and the second-order mixing of the singly occupied antibonding $\pi^*$ orbital into it, through Ga-H bond formation. As a result, the fully occupied bonding $\pi$ band in BaGaGe changes to a weakly dispersive band with Ge pz (lone pair) character in the hydride, which becomes located just below the Fermi level. The Ga-Ge bonds within a layered polyanion are slightly weakened by hydrogen incorporation. A rationale for this is given.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.546-550
• /
• 2010

흐름과 장파에 의하여 발생되는 난류의 subgrid scale mixing effects를 고려할 수 있는 수심적분형 모형(depth-integrated model)을 제시하였다. 완전비선형의 수심적분형 모형은 약분산(weakly dispersive) 환경에서 흐름의 회전성(rotational)을 고려하도록 perturbation approach를 이용하여 유도되었다. 동일한 방법을 이용하여 수심적분형 이송확산방정식(depth-integrated scalar transport equation)을 유도하였다. 방정식은 4차정확도의 유한체적기법을 이용하여 해석하였으며, 다양한 혼합양상을 보이는 흐름에 대한 수치모의를 수행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1981-1987
• /
• 2010

A novel composite (Ag-CNT/$TiO_2$) of silver treated carbon nanotubes (Ag-CNT) and $TiO_2$ was synthesized via wet chemistry followed by a heat treatment. The dispersion and structure of the silver in the synthesized composites determined by X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy(TEM). XRD patterns of the composites showed that the composites contained a mixing anatase and rutile phase. The EDX spectra showed the presence of C, O, Ti and Ag peaks. The $TiO_2$ particles were distributed uniformly in the CNT network, and silver particles were virtually fixed on the surface of the tube. The photocatalysis degraded behaviors of the Ag-CNT/$TiO_2$ composites of the methylene blue, which increased with an increase of the silver component. The Ag-CNT/$TiO_2$ composites have excellent antibacterial activities against Escherichia coli (E. Coli), Pseudomonas aeruginosa (P. Aeru) and Bacillus subtilis (B. Sub) under visible light.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.108-108
• /
• 2017

In this study, biocomposite filaments with agricultural by-products can be used in extrusion-based 3D (Three-dimensional) printing. Extrusion-based 3D printing stands as a promising technique owing to its versatility. We hypothesized that bio-filament composite consisted of something derived from agricultural by-products could be used as 3D printing materials that could overcome the drawbacks of PCL (poly-caprolactone). Bio-filament mixed with PCL and agricultural by-products was defined as r-PCL in this study. In order to find it out the optimal mixing ratio of filaments, we had investigated PCL, r-PCL 10%, r-PCL 20%, r-PCL 50% separately. The morphological and chemical characteristics of the filaments were analyzed by FE-SEM (Field emission scanning electron microscope) and EDX (Energy-dispersive X-Ray spectroscopy), and the mechanical properties were evaluated by stress-strain curve, water contact angle, and cytotoxicity analysis. Results of this study have been shown as a promising way to produce eco-friendly bio-filaments composite for FDM (Fused deposition modeling) method based 3D printing technology. Thus, we could establish biomimetic scaffolds based on bio-printer filaments mixed with agricultural by-product.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.62-73
• /
• 1997

The application of nutrients and pesticides to agricultural lands has been reported to contribute to groundwater contamination, which can be explained by preferential flow in lieu of convective-dispersive flow. An one-dimensional numerical model depicting preferential water and solute movement was modified to describe multi-layer flows. The model is based on a piecewise linear conductivity function. By combining conservation of mass and Darcy's law and using the method of characteristics a solution is obtained for water flow in which water moves at distinct velocities in different flow regions instead of an average velocity for the whole profile. The model allows transfer ofqr solutes between pore groups. The transfer is characterized by assuming mixing coefficients. The model was applied to undisturbed soil columns and an experiment site with structured sandy clay loam soil. Chloride, bromide, and 2, 4-D were used as tracers. Simulated solutes concentrations were in good agreement with the soil column data and field data in which preferential flow of solute is significant. The proposed model is capable of describing preferential solute transport under laboratory and field conditions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.1-3
• /
• 2005

Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.