직접 내부개질형 MCFC용 촉매의 반응 전과 후의 특성분석을 ICP, BET, CHN, EDS, $H_2$ 화학흡착 분석을 통하여 수행하였다. 반응을 거치는 동안 탄산염 전해질의 구성 성분인 K와 Li가 촉매에 전달되고, 그 누적량은 단위전지 내의 위치에 따라 입구, 출구, 중간 순으로 감소하였다. 알칼리 전달량 증가에 따라 BET 표면적과 Ni 분산도가 감소하고 촉매 표면에 증착된 알칼리 탄산염 물질이 존재하는 것으로부터, 촉매 표면상에 존재하는 알칼리성분의 물리적 피복이 촉매 활성을 감소시키는 중요한 원인임을 확인하였다. SEM 분석 결과, 입구, 중간, 출구 순으로 알칼리 성분의 표면 피복율이 감소하였으나, 실제 메탄에 대한 수증기 개질반응의 촉매활성은 출구부분 촉매가 입구나 중간 부분 촉매보다 낮은 활성을 보임으로써, 알칼리 탄산염의 물리적 피복에 의한 활성감소 이외의 다른 화학적 피독 요인이 존재함을 예측하였고, 이를 FT-IR 분석을 통해 확인하였다.
Stokes drift(SD) and Lagrangian discharge(LD) are important factors for analysis of flushing time, tidal exchange, solute transport and pollutant dispersion. The factors should be calculated using the approached method to flow phenomena. The aim of this paper re-examines the previous procedures for computing the SD and LD, and is to propose the new method approached to stratified flow field in the cross-section of coastal region, e.g. Masan Bay. The intensity of velocity near the bottom boundary layer(BBL) depends on the sea-bed irregularity in the coastal estuaries. So we calculated the depth mean velocity(DMV) considering that of BBL omitted in Kjerfve's calculation method. It revealed that BBL effect resulting in application of the bay acts largely on DMV in half more among 1l stations. The new expression of SD and LD per unit width in the cross-section using the developed DMV and proposed decomposition procedure of current were derived as follow : $$Q=u_0+\frac{1}{2}H_1{U_1cos(\varphi_h-\varphi_u)+U_3cos(\varphi_h-\varphi{ud})} LD ED SD$(Q_{skim}+Q_{sk2}) The third term, $Q_{sk2}$, on the right-hand of the equation is showed newly and arise from vertical oscillatory shear. According to the results applied in 3 cross-sections including 11 stations of the bay, the volume difference between proposed and previous SD was founded to be almost 2 times more at some stations. But their mean transport volumes over all stations are 18% less than the previous SD. Among two terms of SD, the flux of second term, $Q_{skim}$, is larger than third term, $Q_{sk2}$, in the main channel of cross-section, so that $Q_{skim}$ has a strong dependence on the tidal pumping, whereas third term is larger than second in the marginal channel. It means that $Q_{sk2}$ has trapping or shear effect more than tidal pumping phenomena. Maximum range of the fluctuation in LD is 40% as compared with the previous equations, but mean range of it is showed 11% at all stations, namely, small change. It mean that two components of SD interact as compensating flow. Therefore, the computation of SD and LD depend on decomposition procedure of velocity component in obtaining the volume transport of temporal and spacial flow through channels. The calculation of SD and LD proposed here can separate the shear effect from the previous SD component, so can be applied to non-uniform flow condition of cross-section, namely, baroclinic flow field.
스테인레스강은 고온, 고압에서 부식에 효과적인 재료로써 액화수소, 가스 등을 저장하는 저장용기 및 고온의 유체들을 이송하는 배관재료로 널리 사용되고 있다. 일반적으로 스테인레스강의 용접은 TIG용접이 이용되어지고 있으며 용접후 용접부위에 발생하는 초기 용접결함 및 사용중 발생하는 열적 피로균열 등이 재료의 신뢰성을 저하하는 요인들로 지적되고 있다. 본 논문에서는 레이저 유도초음파를 이용하여 초기 용접결함에 대한 초음파 특성 규명을 위하여 스테인레스강의 용접부에 인공균열의 크기를 5 mm, 10 mm, 20 mm 길이로 가공후 유도초음파의 결함 길이 변화에 따른 특성을 평가하였다. 배관의 두께 등을 고려하여 L(0,1)모드와 L(0,2)모드를 이용하였으며 각각의 모드가 결함의 길이 변화에 따라 변화를 보였지만 L(0,2)모드가 L(0,1)모드보다 결함 길이에 더욱 민감하게 반응하였다. 본 연구에서는 L(0,1)모드와 L(0,2)모드의 진폭비를 구하여 결함과의 연관성을 평가한 결과 결함 길이와 선형적인 관계를 나타냄으로써 각 모드를 단독적으로 평가하는 것보다는 두 모드의 진폭비를 이용하여 결함을 평가하는 것이 더욱 효과적임을 알 수 있었다.
Solvent-casting 공정을 통해서 제조되는 전형적인 Proton Exchange Membrane (PEM)과는 달리, 일종의 Bulk-Molding Compounds (BMC) Process와 유사한 공정을 사용하여서 실리카 나노 입자들이 나노 크기로 분산된 PEM을 제조하였다. 즉, 반응성 분산제인 Urethane Acrylate Nonionomer (UAN)와 Styrene, Styrene Sulfonic Acid (NaSS), 실리카 나노입자를 Dimethyl Sulfoxide (DMSO) 단일 용매에 혼합시키고 라디칼 개시제 존재 하에서 Mold내에서 공중합을 수행하면, 표면 특성이 각기 다른 실리카 나노 입자들이 나노 크기로 분산된 Poly(urethane acrylate-styrene-styrene sulfonic acid) random copolymer Membrane 즉 일종의 실리카/고분자 Nanocomposite Membrane이 제조될 수 있었다. 실리카 나노 입자들의 Membrane에서의 분산성은 TEM을 이용하여서 확인할 수 있었다. 제조된 Membrane은 분산된 실리카 나노입자들의 표면 특성에 따라서 각기 다른 수팽윤도 및 수소이온전도도 변화 거동을 나타내었다. Membrane에 친수성 실리카 나노 입자들이 분산된 경우에는, Membrane의 수팽윤도가 다소 증가되었지만 거의 일정한 수소 이온 전도도를 나타내었다. 그러나 Membrane의 메탄올 투과도는 상대적으로 크게 감소되었다. 반면에 Membrane에 분산된 소수성 실리카 나노 입자들이 분산된 경우에는, 수팽윤도는 크게 감소되었지만 수소 이온전도도는 거의 변화하지 않았다. 즉 소수성 실리카 나노입자들은 소수성 도메인에 분산되어서 친수성 도메인이 팽윤되는 것을 억제시키지만 수소 이온전도성에는 영향을 미치지 않기 때문이다. 따라서 membrane의 수팽윤도와 수소이온전도성을 실리카 나노 입자들의 표면 특성을 이용하여서 자유로이 조절이 가능하다는 것을 알 수 있었다. 흥미로운 것은 실리카 나노 입자를 membrane에 분산시키는 것만으로도 수소 이온 전도성을 유지시키면서 수팽윤도를 현저하게 저하시킬 수 있다는 것이다.
Background : The pathogenesis of acute inflammatory demyelinating polyradiculoneuropathy (AIDP), Guillain Barre syndrome (GBS) is not clear, but it has been known that the immune mechanisms play an important role. Authors performed this study to establish an animal model of experimental allergic neuritis (EAN) by immunizing the myelin components of peripheral nerves and to understand the electrophysiological and histopathological features as well as the ${CD_5}^+$ B-lymphocyte changes in peripheral bloods in the EAN models. Methods : Lewis rats weighing 150-200 gm were injected subcutaneously in soles two times with total myelin, P0, P1, or P2 proteins purified from the bovine cauda eguina. The EAN induction was assessed by evaluating clinical manifestations. The electrophysiological and histopathological features were studied as routine methods. The ${CD_5}^+$ Blymphocytes were double stained using monoclonal FITC conjugated anti-rat CD45RA and R-PE conjugated anti-rat ${CD_5}^+$ antibodies and calculated using a fluorescence activated cell sorter (FACS). Results : The EAN animal models were established. In two out of five, in one out of two, in none out of three, and in none out of one Lewis rats injected with purified total myelin, P0, P1, P2 proteins respectively, They showed slow spontaneous motor activity and weak resistance against pulling back by tails. The typical electrophysiological and histologic findings in total protein and P0 induced EAN animal models were the decreased conduction velocity, the decreased compound muscle action potential (CMAP) amplitude and the dispersion phenomenon. The perivascular infiltrates of lymphocytes with focal demyelinating process were found in light microscopy. The ${CD_5}^+$ B-lymphocyte expression in three EANs were 2.38%, 3.50% 2.50%, which were not significantly increased, compared with those in normal controls. Conclusion : The EAN animal models were successfully established by injecting the total myelin and P0 myelin and they showed electrophysiological and histological features typical of demyelinating process. However they did not show an increased expression of ${CD_5}^+$ B-lymphocyte in peripheral bloods which could be indirect evidence of humoral autoimmunity.
물유리, 수산화 마그네슘, 리튬염을 이용하여 $90{\pm}5^{\circ}C$에서 2단계로 수열반응시켜 팽윤성이 우수한 $12\;{\AA}$ 헥토라이트를 합성하였다. 합성과정은 우선 $SiO_{2}$ 성분을 약 30% 함유한 물유리와 수산화 마그네슘을 화학양론적 조성으로 물에 혼합하고 교반시키면서 pH를 $6{\sim}8$로 유지시켰다. 그 후 수용액을 $90{\pm}5^{\circ}C$의 온도에서 1차로 반응시켜 슬러리 형태의 전구체(precursor)를 제조하였으며 이것을 세척하여 과잉염을 제거하였다. 이때, 리튬 (ie, LiCl)을 팔면체 치환용 이온으로 혼합하였다. 위와 같이 제조된 수용액을 약 10시간 동안 위와 동일한 온도에서 2차로 반응시켜 겔 형태의 헥토라이트를 생성시켰다. 합성된 헥토라이트의 분말 X-선 회절패턴은 자연산 헥토라이트와 일치하였고 FE-SEM으로 관찰한 결과, 직경 50 nm의 균질한 입자로 이루어져 있었다. 이온교환능력과 팽윤성을 측정한 결과, 각각 90 cmol/kg, $60{\sim}70\;ml/2\;g$으로 확인되었으며 에칠렌글리콜 처리 후, 저면간격은 $12\;{\AA}$에서 $17.4\;{\AA}$으로 이동하였다.
최근 연구성과정보의 원활한 교환 및 유통은 연구생산성 향상에 가장 핵심적인 요인으로 인식되고 있다. 그래서 국가적으로 그리고 각 연구기관에서는 연구성과정보 서비스를 위한 시스템을 계획하거나 구축 중에 있다. 그러나 연구정보들은 서로 다른 형태로 분산되어 있으며, 연구정보를 기술하는 방식에 있어서도 기관별 그리고 연구자 개인별로 많은 차이가 있어서 연구성과정보의 통합에 있어서 많은 제약이 있다. 따라서 본 연구는 시맨틱 웹 기술을 도입하여 연구성과정보의 메타데이터에 대한 상호운용성을 제고하는 방안을 제시함으로써 궁극적으로 연구성과정보의 통합을 지원하고자 한다. 특히 과학기술정보표준화위원회에서 제시한 연구성과정보 메타데이터 표준(안)을 기초로 개발되는 온톨로지는 용어들에 대한 구조적인 그리고 의미적인 통합을 가능하게 하며, RDF/RDFS를 이용한 메타데이터 지식표현은 정보 서비스의 검색과 유통에 있어서 지능적인 서비스를 가능하게 한다. 또한 본 연구를 통하여 제시한 시스템의 개념적 구조는 시맨틱 웹 기반의 검색시스템 개발에 있어서 주요 기능, 구성요소, 적용기술 및 상세 설계의 방향을 제시한다. 본 연구에서 제안한 메타데이터를 통한 시스템의 통합방식은 기존의 연구성과정보 시스템의 서비스 영역을 확대할 뿐 아니라, 더욱 정교해진 지능적인 검색 서비스도 가능하게 한다.
배향된 상태에서 복굴절이 없는 zero-${\Delta}$n 재료를 개발할 목적으로 용융혼합된 폴리락타이드(PLLA, (+)복굴절)/폴리(메틸 메타크릴레이트)(PMMA, (-)복굴절) 블렌드의 상용성과 PMMA의 공단량체인 메틸 아크릴레이트(MA)가 PLLA와의 상용성에 미치는 영향을 살펴보았다. MA 함량에 상관없이 모든 블렌드에서 조성에 따라 변하는 단일 $T_g$와 90% 이상의 투명도가 관찰되었으며, 이로부터 용융혼합된 PLLA/PMMA 블렌드는 분자수준에서 상용성을 보임을 확인하였다. 이들 블렌드는 $280^{\circ}C$의 온도에서도 안정한 단일상을 유지하였다. MA가 17 mol%첨가된 PMMA17과 PLLA의 블렌드의 경우 Hoffman-Weeks 방법을 적용하여 평형융점으로부터 구한 상호작용 에너지 밀도(B)는 $-0.74J/cm^3$이었다. PLLA/PMMA 블렌드는 배향되었을 때 조성고분자들의 고유 배향복굴절이 상쇄되어 특정 혼합비에서 "0" 가까운 복굴절 특성을 나타내었다. PLLA/PMMA5 블렌드의 경우 혼합비에 따른 복굴절 분산을 측정한 결과 zero-${\Delta}$n 특성을 보이는 혼합비에서 역분산이 나타나며, 파장의존성이 없는 복굴절 특성을 보이는 조성이 존재함을 확인하였다.
Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).
자외선차단 제형은 내수성이 중요하므로 수상이 유상에 분산되는 water-in-oil (W/O) 에멀젼으로 만드는 것이 바람직하다. 이 경우에는 오일 특유의 무겁고 끈적이는 사용감 때문에 이를 보완하는 방법으로 실리콘계 오일을 사용한다. 이러한 오일은 유기 자외선차단제와의 상용성이 낮아 에멀젼의 안정성에 문제가 되고 있다. 본 연구에서는 자외선차단 제형의 W/O 에멀젼에서 다양한 오일들 간의 상용성을 Hansen solubility parameter(HSP)를 이용하여 수치적으로 도출하였다. HSP는 물질의 분산, 극성 및 수소 결합을 나타내는 지표로 물질간의 상용성을 판단하는데 유용하다. 본 연구에서는 HSP가 다른 다양한 오일을 선정하여 W/O 에멀젼을 제조하고 제형의 시간에 따른 점도 변화 및 안정성을 조사하여 HSP 수치와의 상관관계 또는 일치성을 고찰하였다. HSP를 이용하면 상용성이 높은 오일 선택을 용이하게 할 수 있었다. 또한, W/O 에멀젼에서 유상의 상용성이 높으면 점도의 경시변화가 작았으며 freeze-thaw cycle (-15 ℃ ~ 45 ℃) 조건에서 안정성이 향상된 것을 확인하였다. 향후 HSP를 통해 성분 구성을 최적화한다면 사용감이 우수하면서 안정성을 확보한 W/O형 자외선차단 제형 개발에 도움이 될 것이라 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.