• Composites Research
• /
• 제18권1호
• /
• pp.38-44
• /
• 2005

본 연구에서는 단일방향 탄소섬유강화복합재료 판에서 $S_o$ 대칭모드의 군속도 분선곡선을 전파 방향을 변화시키먼서 계산하였다. 그리고 속노 분산 곡선에서 첫 번째 단절주파수 이하인 0.2 MHz-mm에 해당하는 $S_o$ 대칭모드 군속도를 가지고서 위상속도 곡선을 얻고 slowness 곡선을 도입하여 군속도 곡선으로 교정하였다. 단일방향 섬유강화복합재료 판에서 $S_o$ 대칭모드의 속도를 전파 방향을 변화시키면서 측정하였고 교정된 군속도 곡선과 비교하였다. 측정된 속도는 섬유 방향 근처의 cusp 영역을 제외하고는 교정된 군속도 곡선과 잘 일치하였다. 이것은 단일방향 탄소섬유강화복합재료 판에서 속도가 빠른 방향으로 에너지를 더 잘 전파하기 때문에 전파 방향이 주축방향과 일치하지 않을 때 군속도 방향은 섬유 방향 쪽으로 기울어지는 결과로 나타난 것이다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.5-17
• /
• 2007

기존의 표면파 기법들은 근거리장 효과를 피하기 위하여 적절한 실험 방법 및 필터 기준을 제시하고 있다. HWAW 기법은 다른 표면파와는 다르게 이러한 근거리장 영역에서의 파의 거동을 적극적으로 활용하여 지반의 전단파 속도 주상도를 도출한다. 에너지가 작은 저주파 신호를 시간-주파수 해석을 통해 획득하며 체적파의 영향을 고려한 단일 배열 역산을 통해 가능하다. 이러한 사항을 검증하기 위해서 근거리장에서의 탄성파의 전파 형상을 수치해석을 통하여 모사하였으며 다양한 지반 형태를 대표하기 위해 5개의 지반모델을 구성하였다. 수치모델링을 통해 획득한 시간영역 신호를 이용하여 HWAW 기법으로 실험분산곡선을 도출하였다. 도출된 실험 분산곡선과 3차원 정모델링(Kausel의 방법)을 통해 계산된 이론 분산곡선의 형상이 각 위치에서 저의 일치하였다. 그러므로 HWAW 기법을 수행하는데 있어 근거리장 영역이 포함된 실험 분산곡선을 획득하여도 Kausel의 방법을 이용하여 역산을 수행할 경우 신뢰성 있는 지반의 전단파 속도를 도출하는 것이 가능하다는 것을 확인할 수 있었다.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.142-150
• /
• 2012

도파관유한요소법 (waveguide finite element method, WFEM)은 단면의 형상이 길이방향으로 일정한 도파관 구조물의 진동을 해석하기 위한 수치해석 기법이다. 도파관유한요소법은 2차원 단면만을 FE 모델링하여 길이방향 파동 전파를 해석하므로 기존의 유한요소법에 비해 해석 모델의 크기가 작고 연산 시간이 짧다는 장점을 가진다. 본 연구에서는 기존의 도파관유한요소법을 확장하여 내부 및 외부에 유체가 채워진 도파관 구조물에 대한 진동 해석을 수행하였다. 이를 위해 내부 유체와 도파관 구조물은 WFE로, 외부 유체는 파수경계요소 (waveguide boudnary element, WBE)로 모델링하고 이들을 연성시킨 운동방정식을 제시하였다. 이 방법의 적용 예로써 내부에 물이 채워진 몰수된 파이프의 진동 및 방사 음향 파워를 해석하였다. 내부 및 외부 유체의 유/무에 따른 분산 선도와 가진점 모빌리티 (point mobility)를 구하고 유체 연성의 효과를 살펴보았다.

• 한국식품위생안전성학회지
• /
• 제18권2호
• /
• pp.43-50
• /
• 2003

A liquid chromatographic method, using matrix solid-phase dispersion (MSPD) is developed for the extraction of residual furazolidone in chicken eggs. Blank or fortified egg samples (0.5 g) were blended with Octadecylsilyl (Bulk $C_{18}$, 40${\mu}{\textrm}{m}$, 18%. load, endcapped. 2 g) derivatized silica. After homogenization, $C_{18}$/egg and Na$_2$S $O_4$matrix were transferred to a column made of 10 ml glass syringe and filter paper and compressed 4.0∼4.5 ml volume. The column was washed with 8 ml of hexane and dried under $N_2$ gas. Furazolidone was eluted with acetonitrile (8 ml) under gravity. The eluate containing furazolidone was free from interfering compounds when analyzed by HPLC with UV detection (365 nm, photodiode array). Calibration curves were linear (r = 0.99985) and inter- (1.47%) and intra-assay (5.29%) variabilities for the concentration range examined (7.8∼497 ng/g of eggs, 20 ${mu}ell$ injection volume) were indicative of an acceptable methodology for the analysis of furazolidone. Average recovery of furazolidone added to egg was 96.2%. The limit of detection for the proposed method was 1 ng/g for furazolidone. The method using MSPD is proposed as an alternative assay to the classical method which involves the use of large volumes of a harmful solvent and requires a long tedious separation and clean-up processes prior to its determination.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.334-344
• /
• 2007

This paper performed a comprehensive evaluation of the results of the 2007 Ground Response Analysis Round Robin Test, at which 14 institutions and individuals participated. The submitted results showed significant discrepancies. The main reason for this difference has been attributed to the dispersion in the estimated shear wave velocity profiles and dynamic soil curves. It is therefore concluded that accurate evaluation of the material properties is of primary importance for reliable estimation of the ground vibration. Evaluation of the effect of the analysis method showed that the equivalent linear analysis overestimates the peak ground acceleration, but overall the results are similar to a total stress nonlinear analysis. However, the total and effective stress nonlinear analyses show distinct discrepancies, the effective stress analyses consistently resulting in a lower response due to the development of the excess pore water pressure and thus softer response.

• 한국음향학회지
• /
• 제23권5호
• /
• pp.353-361
• /
• 2004

증기발생기 세관에서의 유도초음파 전파 특성에 관한 연구를 수행하였다. 증기 발생기 세관의 분산선도 및 특정 모드에 대응하는 초음파 입사각을 계산하였다. 수신된 유도초음파에 대하여 short time Fourier transform을 이용한 시간-주파수 분석을 통하여 유도초음파 모드를 확인하였다. 실험적으로 유도 초음파가 증기발생기 세관의 곡관 부분을 통과할 때 뚜렷한 모드 변환을 관측할 수 없었다. 유도 초음파를 이용한 증기발생기 세관의 최적 검사 모드를 제안하고 실험에 의하여 이를 확인하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1993년도 수공학연구발표회논문집
• /
• pp.175-182
• /
• 1993

The complex nature of low flow transport and tranformation of nonconservative pollutants in natural streams with pools and riffles has been investigated using a numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing hydrodynamic processes (advection, dispersion, and mass exchange mechanicms in streams and in storage zones) and chemical processes (reaction or decay). In this study, a mathematical model (named "Storage-Transformation Model") has been developed to predict adequately the non-Fickian nature of mixing and transformation mechanisms for decaying substances in natural streams under low flow conditions. Comparisons between the concentration-time curves predicted usingthe proposed model and the measured stream data shows that the Storage-Transformation Model yields better agreements in the goneral shape, peak concentration and time to peak than the 1-D dispersion model. The result of this study also demonstrates the differences between transport in pool-and-riffle streams versus transport in more uniform channels. The proposed model shows significant improvement over the conventional 1-D disperision model in predicting natural mixing and stroage processes in streams through pools and riffles.

• 한국대기환경학회지
• /
• 제16권2호
• /
• pp.151-158
• /
• 2000

Since Pusan metropolitanarea where is composed complex terrain is connected to sea the sea-land breeze circulation and the mountain-valley circulation are apt to form A regional scale circulation system is formed at a region which has complex terrain because of curves of its and affect to the dispersion and advection of air pollutants. LCM Local Circulation Model which a propriety was verified described that sea breeze and valley wind at the daytime and land breeze and mountain wind at the nighttime were well devellped over the Pusan metropolital area. Next for the investigation of accuracy of simulated results an observed value at Kae-Kum and Su-Young on the pusan metropolitan area were compared with it at those points. From the comparison of the temperature and horizontal velocity between the results of LCM and an observed values they have a similar trend of a diurnal variation. For the prediction of dispersion and transportation of air pollutants the wind field should be calculated with high accuracy. A numerical simulation using LCM can provide more accuracy results around Pusan metropolitan area.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.16-20
• /
• 2002

Parameter estimations were made for the reversed-phase adsorption of perillyl alcohol (POH), a potent anti-cancer agent, on octadecylsilyl-silica gel (ODS). The average particle diameter of ODS was about $15\;{\mu}m$, and the particles were packed in the column $(3.9\;\times\;300mm)$. The mobile phase used was a mixture of acetonitrile and water, in which the acetonitrile ranged between 50 and $70\;(v/v\;\%)$. The first absolute moment and the second central moment were determined from the chromatographic elution curves by moment analysis. Experiments were carried out using POH solutions within the linear adsorption range. The fluid-to-particle mass transfer coefficient was estimated using the Wilson-Geankoplis equation. The axial dispersion coefficient and the intra particle diffusivity were determined from the slope and intercept of a plot of H vs $1/u_0$, respectively. The contributions of each mass-transfer step were axial dispersion, fluid-to-particle mass transfer, and intraparticle diffusion.