• 한국화재조사학회지
• /
• 제11권1호
• /
• pp.63-73
• /
• 2007

페놀수지로 몰딩된 바이메탈식 서모스탯의 반복적인 동작에 의한 발화위험성을 검토하기 위하여 발화된 것으로 판정된 사례의 연구와 동작 횟수를 가속시킨 실험을 행하였다. 사례연구 및 실험결과, 페놀수지로 몰딩된 바이메탈식 서모스탯(이하 '바이메탈식 서모스탯'이라 칭함)은 반복적인 동작에 의하여 내측의 고정접점과 가동접점 부분 사이에서 몰딩재료인 페놀수지가 국부적으로 탄화되는 트래킹 현상이 발생되며, 이로 인한 전기적인 발열 및 용융 등에 의하여 내측으로부터 발화될 수 있다는 사실을 입증하였다.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.20-26
• /
• 2016

Our work on $Sc_2O_3-W$ matrix dispenser cathodes had been reviewed in this paper. The cathode with uniform distribution of $Sc_2O_3$ had been obtained using liquid-liquid doping method. The cathode had excellent emission property, i.e., the emission current density in pulse condition could reach over $35A/cm^2$. It was found that the cathode surface was covered by a Ba-Sc-O active substance multilayer with a thickness of about 100 nm, which was different from the monolayer and semiconducting layer in thickness. Furthermore, the observation results displayed that nanoparticles appeared at the growth steps and the surface of tungsten grains of the fully activated cathode. The calculation result indicated that the nanoparticles could cause the increase of local electric field strengths. We proposed the emission model that both the Ba-Sc-O multilayer and the nanoparticles distributing mainly on the growth steps of the W grains contributed to the emission. The future work on this cathode has been discussed.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.54-60
• /
• 2007

A theoretical and numerical investigation is performed on the flow in a micronozzle for precision-controlled sealant dispenser. The working fluid is a highly viscous epoxy used as sealant in producing LCD panels, which contains a number of tiny solid spacers. Flow analysis is conducted in order to achieve the optimal design of internal geometry of a nozzle. A simplified design analysis methodology is proposed for predicting the flow in the nozzle based on the assumption that the Reynolds number is much less than O(1). The parallel numerical computations are performed by using a CFD package FLUENT. Comparison discloses that the theoretical model gives a good prediction on the distribution of pressure and wall shear stress in the nozzle. However, the theoretical model has a difficulty in predicting the maximum wall shear stress as found in a limited region near edge by numerical computation. The theoretical and numerical simulations provide the good guideline for designing a dispensing micronozzle.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.36-44
• /
• 2022

Hydrogen energy as an alternative source of energy has been receiving tremendous support around the world, and research is being actively conducted accordingly. However, most of the studies focus on hydrogen storage tanks and only are few studies on interpreting the hydrogen filling system itself. In this study, with reference to SAE J2601, a hydrogen fueling protocol, a simulation model was developed that can confirm the behavior of the vehicle's internal tank during hydrogen fueling. With respect to factors such as fuel supply temperature, ambient temperature, and pressure increase rate, the developed model can check the change of temperature and pressure in the tank and the state of hydrogen charging during hydrogen fueling. The validity of the developed simulation model was confirmed by comparing the simulation results with the experimental results presented in SAE J2601.

• 한국응용곤충학회지
• /
• 제54권4호
• /
• pp.369-374
• /
• 2015

복숭아순나방(Grapholita molesta)은 핵과류과실에 일차 피해를 주는 해충이다. 이를 해결하기 위해 종합적병해충관리 [IPM]의 일환으로써 전세계적으로 교미교란제가 농가에 적용되고 있다. 왁스, 폴리에틸렌 튜브, 에어로졸 형태의 다양한 교미교란제가 상업화되었다. 이 연구에서는 복숭아순나방 성페로몬 방출기로써 에스테르왁스와 폴리프로필렌(PP)필름백을 구성하는 방출기를 기존의 파라핀 왁스와 폴리에틸렌(PE) 재질의 필름과 비교하여 페로몬의 방출거동을 분석했다. PE재질의 필름백은 성페로몬의 방출이 불규칙한 반면, PP필름백에서 성페로몬은 시간에 따라 일정하게 방출하는 패턴을 얻었다. 이러한 결과를 토대로 Japan 왁스_PP 필름 방출기(Japan_PP)를 제작하였고, 약 5개월 동안 복숭아과수원에 적용한 결과 98% 이상의 교미교란 효과가 검증되었다.

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2006년도 추계학술대회 및 정기총회
• /
• pp.52-52
• /
• 2006

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.897-902
• /
• 2015

This study reports on a uniform resin coating method by using a doctor blade type dispenser. For high productivity, continuous imprint-lithography has been studied, and developed fabrication systems are used in several applications such as anti-reflection films, dry adhesives, and water collecting surfaces. In the continuous fabrication field, researchers have typically focused on patterning and demolding procedures. During the roll-to-roll fabrication process, however, the uniform resin coating process is also important in order to obtain a high quality product, which can be evaluated by uniform thickness, precise geometric expressions, and a thin residual layer. To achieve these, a doctor blade type dispenser was designed and fabricated. As a result, thickness of coated resin was well controlled by modulating the flow rate of the resin and blading gap. In addition, a very thin layer coating process (${\sim}10{\mu}m$) was achieved by softly contacting the blade on the substrate.

• 디자인학연구
• /
• 제5권1호
• /
• pp.21-36
• /
• 1992

Since 80th, in the monetary markets due to the escalation of creditable promptness dealing of financial goods, Korea monetary business has been confronted with structual contradictions. The first like a men power reduction, inorder to meet and satisfying with cost reduction policy of the holding firms and secondly, escalation and expention of business networks or facilities inorder to meet and satis~'ing with customers continuously seeking for prompt, acurate, and helpfulness service nearly like one similar to a door to door service. Accordingly, the firms eventually poured mere sweaty money into procuring such devices for upgrading. On the contrary, however, regardless the escalation monetary expenditure may be, inorder to promote quality of the same devices are keen necessary because present days customer groups were tended to receives ample service almost like door to door service without moving too$$\mu$h apart from the immediate spot where they belongs tl or veryspot of where actually they spend instead of deep consideration of natures, quality or sttractiveness of service medias what they can received from. Under the present circumstance, the financial business firms, however, would highly suffering and receives pressures from imblalance natures ofincoming and out go of the business budget due to excessive inc1ease of managerial expences. For these reasons, therefor, in order to solves, compensates, improves, and developes most effective financial service for customers can use under most pleasant environment, the establishment of adequate standardization of such service devices based on the foregoing environmental circumstances. This analytical study, therefor, mainly aimed and emphasized based on pre- estimatimation of proper devlopment and use of the unattended servicing devices such as Cash Dispenser and Auto Teller Machine by generalization, automating. and innovation of design to meet compactness and door to door like convenient service for customers which can be achieved by performing constant comparative analysis and continual study toward development of such devices those of which produced by Five (5) major domestic producers around the country.

• 한국응용곤충학회지
• /
• 제56권3호
• /
• pp.289-294
• /
• 2017

오리엔탈과실파리(Bactrocera dorsalis)는 주요 검역 대상으로 지정된 해충이다. 이 해충에 대한 고감도 모니터링과 진단 기술이 초기 방역 처리에 요구된다. 본 연구는 오리엔탈과실파리를 유인하여 치사시킬 목적으로 메틸유제놀과 생물농약을 혼합한 왁스형 방출기를 제작하였다. 본 연구는 또한 5종의 주요 검역 과실파리(오리엔탈과실파리, 오이과실파리, 퀸즐랜드과실파리, 말레이시아과실파리, 지중해과실파리)에 대한 PCR 진단프라이머를 개발하였다. 이상의 모니터링용 왁스방출기과 분자진단기술을 말레이시아 코타키나발루 지역에서 실증 시험하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.141-146
• /
• 2018

본 논문에서는 스마트폰으로 번호표 발행기와 은행의 서버 컴퓨터를 연동하여 효율적인 고객관리를 위한 시스템을 제안한다. 본 논문에서 제안한 배경은 다음과 같다. 이전부터 은행에서 사용하는 고객관리 시스템은 일반 사용자를 대상으로 사용하고 있다. 하지만 스마트폰의 발전으로 온라인 이용자가 증가함과 동시에 은행 지점의 수는 감소하여, 오프라인에서 은행을 직접 이용하였을 때 장시간의 대기시간이 발생한다. 또한 고객의 비효율적인 시간 손실이 발생함에 따라 고객 서비스에도 문제가 생기고 있다. 본 논문은 이러한 고객관리 문제에서 발생하는 고객 서비스를 개선하기 위하여 스마트폰과 오프라인에서 사용하고 있는 번호표 발행기를 활용하여 고객 경우의 수에 따른 큐 관리 시스템을 제안하였다.