Browse > Article
http://dx.doi.org/10.7839/ksfc.2022.19.2.036

A Study on the Modeling of Fueling Hydrogen Tank in Vehicle Using Dispenser  

Choi, Ji Ah (Department of Mechanical System Engineering, Graduate School, Pukyong National University)
Ji, Sang Won (Department of Mechanical System Engineering, Pukyong National University)
Jang, Ji Seong (Department of Mechanical System Engineering, Pukyong National University)
Publication Information
Journal of Drive and Control / v.19, no.2, 2022 , pp. 36-44 More about this Journal
Abstract
Hydrogen energy as an alternative source of energy has been receiving tremendous support around the world, and research is being actively conducted accordingly. However, most of the studies focus on hydrogen storage tanks and only are few studies on interpreting the hydrogen filling system itself. In this study, with reference to SAE J2601, a hydrogen fueling protocol, a simulation model was developed that can confirm the behavior of the vehicle's internal tank during hydrogen fueling. With respect to factors such as fuel supply temperature, ambient temperature, and pressure increase rate, the developed model can check the change of temperature and pressure in the tank and the state of hydrogen charging during hydrogen fueling. The validity of the developed simulation model was confirmed by comparing the simulation results with the experimental results presented in SAE J2601.
Keywords
Hydrogen Dispenser; Hydrogen Tank in Vehicles; Fueling System; Hydrogen Fueling Protocol;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 B. H. Park, "Simulation of Temperature Behavior in Hydrogen Tank During Refueling Using Cubic Equations of State", Trans. of the Korean Hydrogen and New Energy Society, Vol.30, No.5, pp.385~394, 2019.
2 B. D. Solomon and A. Barierjee, "A Global Survey of Hydrogen Energy Research, Development and Policy", Energy Society, Vol.34, pp.781~792, 2006.
3 D. McCloy and H. Martin, "Control of Fluid Power : Analysis and design", 2nd edition, Ellis Horwood Limited, 1980.
4 M. Heath, P. L. Woodfield, W. Hall, and M. Monde, "An Experimental Investigation of Convection Heat Transfer during Filling of a Composite-fibre Pressure Vessel at Low Reynolds Number", Experimental Thermal and Fluid Science, Vol.54, pp.151-157, 2014.   DOI
5 T. Bourgeois, F. Ammouri, M. Weber, and C Knapik, "Evaluating the Temperature inside a Tank during a Filling with Highly-pressurized Gas", J. Hydrogen Energy, Vol.40, No.35, pp.11748-11755, 2015.   DOI
6 Y. A. Cengel and A. J. Ghajar, "Thermodynamics : An Engineering Approach, 7th edition, McGraw-Hill, USA, 2011.
7 E. D. Rothuizen, "Hydrogen Fuelling Stations: A Thermodynamic Analysis of Fuelling Hydrogen Vehicles for Personal Transportation", Ph.D. Dissertation, Technical University of Denmark, Kongens Lyngby Denmark, 2013.
8 J. Guo, J. Yang, Y. Zhao, and X. Pan, et al., "Investigations on Temperature Variation within a Type III Cylinder during the Hydrogen Gas Cycling Test", Vol.13, No.25, pp.13926-13934, 2014.
9 S. Y. Baek et al., "Development of a Simulation Model for an 80 kW-class Electric All-Wheel-Drive (AWD) Tractor using Agricultural Workload", Journal of Drive and Control, Vol.17, No.1, pp.27-36, 2020.   DOI
10 Society of Automotive Engineers (SAE), "Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles (Standard J2601_201407)", SAE International, 2014.
11 M. Monde, P. Woodfiled, T. Takano and M. Kosaka, "Estimation of Temperature Change in Practical Hydrogen Pressure Tanks being Filled at High Pressure of 35 and 70 MPa", International Journal of Hydrogen Energy, Vol.37, pp.5723~5734, 2012.   DOI
12 R. O. Cebolla, B. Acosta, N. deMiguel and P. Moretto, "Effect of Precooled Inlet Gas Temperature and Mass Flow Rate on Final State of Charge during Hydrogen Vehicle Refueling", International Journal of Hydrogen Energy, Vol.40, pp.4698~4706, 2015.   DOI
13 M. S. Kim, J. H. Ryu, S. K. Lee and S. W. choi, "Numerical Analysis of Filling Flow in Type III Hydrogen Tank with Different Turbulence Models", Trans. of the Korean Hydrogen and New Energy Society, Vol.32, No.6, pp.483~488, 2021.   DOI
14 J. R. Han et al., "Study on the Optimum Capacity Analysis for Hydrogen Fueling Station in Korea", Trans. of Korean Hydrogen and New Energy Society, Vol.28, No.6, pp.649~656, 2017.   DOI
15 J. Zheng et al., "Development of High Pressure Gaseous Hydrogen Storage Technologies", International Journal of Hydrogen Energy, Vol.37, pp.1048~1057, 2012.   DOI
16 M. K. Seo et. al., "Development of Modeling Method of Hysteretic Characteristics for Accurate Load Measurement of Trucks", Journal of Drive and Control, Vol.18, No.2, pp.38-45, 2021.   DOI
17 Society of Automotive Engineers (SAE), "Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles (Standard J2601_201612)", SAE International, 2016.
18 P. L. Woodfield, M. Monde, and Y. Mitsutake, "Measurement of Averaged Heat Transfer Coefficients in High-Pressure Vessel during Chagring with Hydrogen Nitrogen or Argon Gas", Journal of Thermal Science and Technology, Vol.2, No.2, pp.180-191, 2007.   DOI
19 S. G. Noh, "Estimation of Hydrogen Filling Time Using a Dynamic Modeling", Trans. of the Korean Hydrogen and New Energy Society, Vol.32, No.3, pp.187~195, 2021.
20 J. Schneider, et al., "Validation and Sensitivity Studies for SAE J2601, the Light Duty Vehicle Hydrogen Fueling Standard", SAE International Journal of Alternative Powertrains, Vol.3, No.2, pp.257~309, 2014.   DOI