• 한국임상수의학회지
• /
• 제32권5호
• /
• pp.417-421
• /
• 2015

골대체재는 지연유합이나 유합부전 그리고 골절술과 관절고정술 시 골편의 연속성 확립이 필요한 경우 골절의 주요 결손부위를 채우는데 주로 활용되고 있다. 자가골을 대체할 수 있는 천연 골이식재의 대표적인 것이 calcium carbonate (CC)이며, 갑오징어의 오적골(Cuttlebone, CB) 또한 천연 CC로 이루어져 있다. 본 연구에서는 오적골의 다양한 전처리 후 직경 5 mm 두께 2 mm의 형태로 가공하여 생체적합성을 평가하고자 하였다. 조직검사에서 결합조직 두께는 2, 4주차 모두 CBHA군에서 가장 유의성 있게 얇았다 (p < 0.05). 이상의 결과들은 CBHA가 생체 내에 적용하는 골대체재로서 생체적합성이 매우 높은 것으로 나타났다. 따라서 CBHA는 편평골에 있어 생체적합성이 뛰어난 골대체재로 그 가치가 있는 것으로 생각되며, 수의 임상에 있어서 활용성이 매우 높을 것으로 사료된다.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.139-152
• /
• 2006

Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.547-553
• /
• 2011

We investigated the dielectric and mechanical properties of ceramic polymer composite xBNT - (1-x)LCP (x= 0, 10, 20, 30, 40 vol.%). The disk shaped BNT ($BaNd_2Ti_4O_{12}$) - LCP (liquid crystal polymer) composite samples were prepared by compression molding method. With increasing the BNT content in composites from 10 to 40 vol.%, the dielectric constant increased but the dielectric loss as well as bending strength of composites reduced. These composites were well described with modified Lichtenecker's model having k = 0.392 and 0.303 for the first and second ball milled BNT filled composites, which means that the BNT filler in composites are well dispersed. The dielectric constant of the composite comprised of the second milled BNT ($D_{50}$ = 1.39 um) was higher that of the composite of the first milled BNT ($D_{50}$= 2.45 um), which seems to be related with the different particle size and dispersion of BNT fillers in LCP matrix. The bending strength of the composite containing the second milled BNT was superior to that of the composite of the first milled BNT.

• 한국멀티미디어학회논문지
• /
• 제8권10호
• /
• pp.1322-1328
• /
• 2005

점성 유체를 담고 쳐는 실린더가 회전운동을 시작하면 회전 원판의 원심력과 에크만 펌핑 효과에 의해 실린더 외벽의 각운동량이 유체에 전달되는 과정에서 자오면상의 유동이 생기게 되고, 이 때 유체의 특성에 따라 유동장의 운동량 획득 특성이 다르게 나타나게 된다. 본 연구에서는 뉴턴 유체와 비-뉴턴 유체의 유동장 획득에 대한 정보를 가시화 영상에서 검출하고 이를 기반으로 유체의 특성을 분석하는 방법을 제안한다. 영상으로부터 운동량이 가장 크게 변화하는 전단면(shear front)의 위치를 알아내기 위해서, 유체의 운동량이 영상에서의 밝기정보로 나타나도록 실험환경을 구성한다. 입력 영상으로부터 유체의 운동량과 흐름을 가시화 할 수 있도록 가시화 매개 물질을 사용하여 영상을 획득하고, 영상에서 에크만 경계층의 전단면을 찾아내어 이동거리를 계산함으로써 유체의 특성을 분석하는 방안을 제시한다. 또한 유동장에 대해, LDV(Laser Doppler Velocimetry)로 측정한 값과 영상으로부터 얻은 값을 비교함으로써 제안된 방법에 대한 정확성을 검증하고, 검증된 데이터를 기반으로 비-뉴턴 유체와 뉴턴 유체에 대한 특성을 분석한다.

• The Journal of Advanced Prosthodontics
• /
• 제2권4호
• /
• pp.117-121
• /
• 2010

PURPOSE. The present study was intended to evaluate the effect of soldering techniques with infrared ray and gas torch under different gap distances (0.3 mm and 0.5 mm) on the tensile strength and surface porosity formation in Ni-Cr base metal alloy. MATERIALS AND METHODS. Thirty five dumbbell shaped Ni-Cr alloy specimens were prepared and assigned to 5 groups according to the soldering method and the gap distance. For the soldering methods, gas torch (G group) and infrared ray (IR group) were compared and each group was subdivided by corresponding gap distance (0.3 mm: G3 and IR3, 0.5 mm: G5, IR5). Specimens of the experimental groups were sectioned in the middle with a diamond disk and embedded in solder blocks according to the predetermined distance. As a control group, 7 specimens were prepared without sectioning or soldering. After the soldering procedure, a tensile strength test was performed using universal testing machine at a crosshead speed 1 mm/min. The proportions of porosity on the fractured surface were calculated on the images acquired through the scanning electronic microscope. RESULTS. Every specimen of G3, G5, IR3 and IR5 was fractured on the solder joint area. However, there was no significant difference between the test groups (P > .05). There was a negative correlation between porosity formation and tensile strength in all the specimens in the test groups (P < .05). CONCLUSION. There was no significant difference in ultimate tensile strength of joints and porosity formations between the gas-oxygen torch soldering and infrared ray soldering technique or between the gap distance of 0.3 mm and 0.5 mm.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.368-374
• /
• 2015

PURPOSE. The aim of the study was to evaluate the effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations. MATERIALS AND METHODS. Three different types of disk-shaped zirconia coping specimens (Lava, Cercon, Zirkonzahn: ${\phi}10mm{\times}0.4mm$) were fabricated and veneered with IPS e.max Press Ceram (shade A2), for total thicknesses of 1 and 1.5 mm. A total of sixty zirconia restoration specimens were divided into six groups based on their coping types and thicknesses. The abutment specimens (${\phi}10mm{\times}7mm$) were prepared with gold alloy, base metal (nickel-chromium) alloy, and four different shades (A1, A2, A3, A4) of composite resins. The average $L^*$, $a^*$, $b^*$ values of the zirconia specimens on the six abutment specimens were measured with a dental colorimeter, and the statistical significance in the effects of three variables was analyzed by using repeated measures analysis of variance (${\alpha}$=.05).The average shade difference (${\Delta}E$) values of the zirconia specimens between the A2 composite resin abutment and other abutments were also evaluated. RESULTS. The effects of zirconia specimen thickness (P<.001), abutment shade (P<.001), and type of zirconia copings (P<.003) on the final shade of the zirconia restorations were significant. The average ${\Delta}E$ value of Lava specimens (1 mm) between the A2 composite resin and gold alloy abutments was higher (close to the acceptability threshold of 5.5 ${\Delta}E$) than th ose between the A2 composite resin and other abutments. CONCLUSION. This in-vitro study demonstrated that abutment shade, ceramic thickness, and coping type affected the resulting shade of zirconia restorations.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.115-120
• /
• 2014

PURPOSE. The aim of this in vitro study was to evaluate the effect of aging on the tear strength and cytotoxicity of four soft denture lining materials. MATERIALS AND METHODS. Four commonly used soft denture lining materials, (Coe-Comfort$^{TM}$ GC America Inc., Alsip, IL, USA; Coe-SOFT$^{TM}$ GC America Inc., Alsip, IL, USA; Visco-gel Dentsply Caulk Milford, DE, USA; and Sofreliner Tough M Tokuyama Dental Corporation Tokyo, Japan) were selected. Sixty trouser-leg designed specimens per lining material were fabricated using a stainless steel mold for tear strength testing. The specimens were divided into non-thermocycling and 1000-, and 3000-thermocycling groups. For the cytotoxicity test, twenty-four disk shaped specimens per material were fabricated using a stainless steel mold. The specimens were soaked in normal saline solution for 24 h, 48 h and 72 h. Cytotoxicity was measured by XTT assay in L929 mouse fibroblasts. Data were analyzed by two way analysis of variance and Dunnett's test (P<.05). RESULTS. Before thermocycling, Sofreliner Tough M ($10.36{\pm}1.00N$) had the highest tear strength value while Coe-Comfort$^{TM}$ ($0.46{\pm}0.10N$) had the lowest. After 3000 cycles, Sofreliner Tough M ($9.65{\pm}1.66N$) presented the highest value and Coe-Comfort$^{TM}$ ($0.42{\pm}0.08N$) the lowest. Sofreliner Tough M, in all incubation periods was the least toxic with significant differences compared to all other materials (P<.05). Coe-Comfort$^{TM}$, Coe-$SOFT^{TM}$, and Sofreliner Tough M did not show any significant differences within their material group for all incubation periods. CONCLUSION. This in vitro study revealed that aging can affect both the tear strength and cytotoxicity of soft denture materials depending on the composition.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.271-278
• /
• 2018

PURPOSE. The purpose of this in vitro study was to evaluate the effect of abrasive toothbrushing on the surface properties of monolithic computer-assisted design and computer-assisted manufacturing (CAD/CAM) materials stored in food-simulating liquids (FSLs). MATERIALS AND METHODS. Fourty-eight disk-shaped test specimens of each material (Paradigm MZ100/PMZ, Lava Ultimate/LU, Vita Enamic/VE, and Vita Mark II/VMII) with a diameter of 10.0 mm and a thickness of $3.0{\pm}0.05mm$ were prepared. Specimens were divided into 4 subgroups (n=12) and stored in air, distilled water, 0.02 M citric acid, or 75% ethanol/water solution for 7 days at $36.5^{\circ}C$. Then, the specimens were brushed in a multi-station brushing machine under a vertical load of 2.0 N for 3 hours. Surface gloss (GU), roughness (Ra), and hardness (Vickers [VHN]) were measured after storage and brushing simulation. The data sets were statistically analyzed with 2 and 3-way ANOVAs followed by the Tukey's post-hoc comparisons (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the materials concerning the results of surface properties. VMII showed the highest VHN, while PMZ produced the lowest. Storage in FSLs significantly affected the VHN of PMZ and LU. VMII showed the lowest Ra and highest GU irrespective of FSLs and of abrasive toothbrushing. VE, LU, and PMZ produced significant decrease in GU and increase in Ra after toothbrushing. CONCLUSION. Surface properties of monolithic CAD/CAM restorative materials were differently affected by the storage media and abrasive toothbrushing.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.497-502
• /
• 2001

디스크형 기록매질을 사용하는 홀로그래픽 메모리에서 뒤틀린 니매틱 액정 디스플레이를 사용하여 세기와 위상을 동시에 변조하는 방법을 제안한다. 세기변조에 대해서 액정 디스플레이 픽셀의 밝고 어두운 상태에 따라 2진의 off (0) 과 on (1)을 표현하기 때문에 기존의 방식과 다를 짓이 없다. 그러나 우리의 방식에서는 on의 상태에서 서로 다른 2가지의 위상지연을 만들 수 있다. 이 2 가지의 위상지연이 180도에 가까울 경우, Fourier 면 홀로그램을 기록할 때 데이터 영상의 dc 성분을 감소시켜 기록면에서의 빔 세기 분포를 향상시킬 수 있다. 제안한 방식에 대한 유용성을 실험으로 데모하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.73-73
• /
• 2011

We will report a few methods to improve the efficiency and stability in small molecule based organic solar cells, including the formation of bulk heterojunctions (BHJs) through alternative thermal deposition (ATD), the use of a micro-cavity structure and interface modifications. By ATD which is a simple modification of conventional thermal evaporation, the thicknesses of alternative donor and acceptor layers were precisely controlled down to 0.1 nm, which is critical to form BHJs. The formation of a BHJ in copper(II) phthalocyanine (CuPc) and fullerene (C60) systems was confirmed by AFM, GISAXS and absorption measurements. From analysis of the data, we found that the CuPc|C60 films fabricated by ATD were composed of the nanometer sized disk shaped CuPc nano grains and aggregated C60, which explains the phase separation of CuPc and C60. On the other hand, the co-deposited CuPc:C60 films did not show the existence of separated CuPc nano grains in the CuPc:C60 matrix. The OPV cells fabricated using the ATD method showed significantly enhanced power conversion efficiency compared to the co-deposited OPV cells under a same composition [1]. We will also present by numerical simulation that adoption of microcavity structure in the planar heterojunction can improve the short circuit current in single and tandem OSCs [2]. Interface modifications also allowed us to achieve high efficiency and high stability OSCs.