• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1883-1887
• /
• 1991

Identification theory for linear discrete system has been presented by a great many reference, but research works for identification of continuous-time system are less than preceding identification. In fact, a great man), systems for engineering are continuous-time systems, hence, research for identification of continuous-time system has important meaning. This paper offers the following results: 1. Corresponding relations for the parameters of continuous-time model and discrete model may be shown, when single input-output system has general characteristic roots. 2. To do identification of single variable continuity linear system with stability constraints from samples of input-output data, it is necessary to use optimization with stability constraints. 3. Main results of this paper may be explained by a simple example.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.4
• /
• pp.29-39
• /
• 1997

A discrete model reference control scheme for a vehicle four wheel steering system(4WS) is proposed and evaluated for a class of discrete time nonlinar dynamics. The schmen employs a neural network to identify the plan systems, wher the neural network estimates the nonlinear dynamics of the plant. The algorithm is proven to be globally stable, with tracking errors converging to the neighborhood of zero. The merits of this scheme is that the global system stability is guaranteed. Whith thd resulting identification model which contains the neural networks, the parameters of controller are adjusted. The proposed scheme is applied to the vehicle active four wheel system and shows the validity and effectiveness through simulation. The three-degree-of freedom vehicle handling model is used to investigate vehicle handing performances. In simulation of the J-turn maneuver, the yaw rate overshoot reduction of a typical mid-size car is improved by 30% compared to a two wheel steering system(2WS) case, resulting that the proposed scheme gives faster yaw rate response andl smaller side slip angle than the 2WS case.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.2
• /
• pp.121-127
• /
• 2006

An analysis procedure for the combined problem of control algorithm and aeroelastic system which is based on the computational fluid dynamics(CFD) technique has been developed. The aerodynamic forces in the transonic region are calculated from the transonic small disturbance(TSD) theory. An linear quadratic regulator(LQR) controller is designed to suppress the transonic flutter. The optimal control gain is estimated by solving the discrete-time Riccati equation. The system identification technique rebuilds the CFD-based aeroelstic system in order to form an adequate system matrix which involved in the discrete-time Riccati equation. Finally the controller, that is constructed on the basis of system identification technique, is used to suppress the flutter phenomenon of the airfoil with attached store. This approach, that is, the CFD-based aeroservoelasticity design, can be utilized for the development of effective flutter controller design in the transonic region.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.559-562
• /
• 2004

In this paper, a new dual-rate digital control technique for the Takagi-Sugeno (T-S) fuzzy system is suggested. The proposed method takes account of the stabilizablity of the discrete-time T-S fuzzy system at the fast-rate sampling points. Our main idea is to utilize the lifted control input. The proposed approach is to obtain the dual-rate discrete-time T-S fuzzy system by discretizing the overall dynamics of the T-S fuzzy system with the lifted control, and then to derive the sufficient conditions for the stabilization in the sense of the Lyapunov asymptotic stability for this system.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2543-2545
• /
• 2004

In this paper, a new multirate digital control technique for the Takagi-Sugeno (T-S) fuzzy system is suggested. The proposed method takes account of the stabilizablity of the discrete-time T-S fuzzy system at the fast-rate sampling points. Our main idea is to utilize the lifted control input. The proposed approach is to obtain the multirate discrete-time T-S fuzzy system by discretizing the overall dynamics of the T-S fuzzy system with the lifted control, and then to derive the sufficient conditions for the stabilization in the sense of the Lyapunov asymptotic stability for this system. An example is provided for showing the feasibility of the proposed discretization method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1693-1694
• /
• 2008

This paper deals with the stability analysis method of a networked control system using the discrete-time MJLS(Markov Jump Linear System). The necessary and sufficient conditions for the mean stability and mean square stability of a networked control system having data uncertainties are proposed. The numerical example is presented to illustrate the usefulness of proposed stability conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1292-1306
• /
• 2014

This paper proposes a space-polarization division multiple access (SPDMA) system that has limited feedback channels. The system simultaneously serves data streams to multiple mobile users through dual-polarized antenna arrays, by using pre-determined sets of precoding vectors that are orthogonal in both space and polarization domains. To this end, a codebook whose elements are sets of the precoding vectors is systematically designed based on the discrete Fourier transform (DFT) matrix and considering the power imbalance of polarized channels. Throughput of the SPDMA system is evaluated and compared to that of space division multiple access (SDMA) system, according to the various parameters including cross polarization discrimination (XPD). The results show that the throughput of SPDMA system outperforms that of SDMA in the environments of high XPD with many mobile users.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2348-2350
• /
• 1998

The hybrid control system for a wheeled mobile robot with nonholonomic constraints to perform a cluttered environment maneuver is proposed. The proposed hybrid control system consists of a continuous state system for the trajectory control, a discrete state system for the motion and orientation control, and an interface control system for the interaction process between the continuous dynamics and the discrete dynamics The continuous control systems are modeled by the switched systems with the control of driving wheels, and the digital automata for motion control are modeled and implemented by the abstracted motion of mobile robot. The motion control tasks such as path generation, motion planning, and trajectory control for a cluttered environment are investigated as the applications by simulation studies.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.136-144
• /
• 1999

This paper presents an in-process measurement system for shaft radius measurement during grinding process. This system does not require to stop the grinding process, which can enhance productivity and quality. In order to measure the radius, the system employs an eddy current sensor that can measure without any contact with the shaft. This type of sensor is very appropriate because it is insensitive to interference such as cutting fluid, coolant, contact pressure, and wear. For data analysis, the measurement system is modeled as a linearized discrete form where the states with noise are estimated by an extended Kalman filter. This system has been validated through simulations and experiments.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.28-36
• /
• 2021

This paper proposes two novel methods to model and simulate a mobile Internet of Things (IoT) system using the discrete event system specification (DEVS) formalism. In traditional simulation methods, it is advantageous to partition the simulation area hierarchically to reduce simulation time; however, in this case, the structure of the model may change as the IoT nodes to be modeled move. The proposed methods reduce the simulation time while maintaining the model structure, even when the IoT nodes move. To evaluate the performance of the proposed methods, a prototype mobile IoT system was modeled and simulated. The simulation results show that the proposed methods achieve good performance, even if the number of IoT nodes or the movement of IoT nodes increases.