• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.393-396
• /
• 2008

Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

• 한국전자파학회논문지
• /
• 제20권11호
• /
• pp.1178-1185
• /
• 2009

본 논문은 2.5 MHz 간격으로 광대역 주파수를 발생하며 응답 시간이 400 nsec 이하인 초고속 이산(discrete) 주파수 합성기를 제안한다. 제안한 주파수 합성기는 고정 주파수 위상 제어 루프(PLL)와 주파수 분배기를 이용해 16개의 기준 신호를 생성하고, 이들을 선택하여 주파수 혼합하는 방식으로 710~1,610 MHz내에서 2.5 MHz 간격의 이산 주파수 신호를 고속으로 생성한다. 제작된 주파수 합성기의 주파수 천이 응답 시간은 평균 350 nsec, 고조파를 비롯한 모든 불요파 신호는 -60 dBc 이하, 위상 잡음 특성은 -94 dBc/Hz @100 Hz, 출력 세기는 평균 21.5 dBm, 평탄도는 2.65 dB 이하로 측정되었다. 또한 주파수 천이 응답 속도를 측정하는 새로운 기법의 측정 방법이 제안되었다.

• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.15-20
• /
• 2013

An aero-acoustic performance analysis method of regenerative blower is developed as one of the FANDAS codes. The aerodynamic performance of regenerative blower is predicted by using momentum exchange theory coupled with pressure loss and leakage flow models. Based on the performance prediction results, the noise level and spectrum of regenerative blower are predicted by discrete frequency and broadband noise models. The combination of the performance and the noise prediction methods gives aero-acoustic performance map and noise spectrum analysis results, which are well-agreed with the actual measurement results within a few percent relative error.

• Computers and Concrete
• /
• 제28권5호
• /
• pp.521-532
• /
• 2021

Present paper focuses on the modeling of size effect on the compressive strength of normal concrete with the application of Discrete Element Method (DEM). Test specimens with different size and shape were cast and uniaxial compressive strength test was performed on each sample. Five different concrete mixes were used, all belonging to a different normal strength concrete class (C20/25, C30/37, C35/45, C45/55, and C50/60). The numerical simulations were carried out by using the PFC 5 software, which applies rigid spheres and contacts between them to model the material. DEM modeling of size effect could be advantageous because the development of micro-cracks in the material can be observed and the failure mode can be visualized. The series of experiments were repeated with the model after calibration. The relationship of the parallel bond strength of the contacts and the laboratory compressive strength test was analyzed by aiming to determine a relation between the compressive strength and the bond strength of different sized models. An equation was derived based on Bazant's size effect law to estimate the parallel bond strength of differently sized specimens. The parameters of the equation were optimized based on measurement data using nonlinear least-squares method with SSE (sum of squared errors) objective function. The laboratory test results showed a good agreement with the literature data (compressive strength is decreasing with the increase of the size of the specimen regardless of the shape). The derived estimation models showed strong correlation with the measurement data. The results indicated that the size effect is stronger on concretes with lower strength class due to the higher level of inhomogeneity of the material. It was observed that size effect is more significant on cube specimens than on cylinder samples, which can be caused by the side ratios of the specimens and the size of the purely compressed zone. A limit value for the minimum size of DE model for cubes and cylinder was determined, above which the size effect on compressive strength can be neglected within the investigated size range. The relationship of model size (particle number) and computational time was analyzed and a method to decrease the computational time (number of iterations) of material genesis is proposed.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1299-1306
• /
• 2017

This paper presents a boundary tracking control of an agent. To this end, it is shown that the boundary tracking problem can be reformulated into a robust control of uncertain double integrator first. Then, a disturbance observer (DOB) based control is proposed solving the robust control problem. Unlike the existing results in the literature, the proposed DOB based control requires only the local position measurement of the boundary (not the gradient information). The performance of the proposed control is demonstrated for two cases: the measurement of the boundary is given in a continuous or discrete manner. Finally, it is shown that the proposed control can be used for environmental monitoring as well by showing that the agent follows a level curve of real environmental monitoring data.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.695-706
• /
• 2014

Partial discharge (PD) measurements have emerged as a dominant investigative tool for condition monitoring of insulation in high voltage equipment. But the major problem behind them the PD signal is severely polluted by several noises like White noise, Random noise, Discrete Spectral Interferences (DSI) and the challenge lies with removing these noise from the onsite PD data effectively which leads to preserving the signal for feature extraction. Accordingly the paper is mainly classified into two parts. In first part the PD signal is artificially simulated and mixed with white noise. In second part the PD is measured then it is subjected to the proposed denoising techniques namely Translation Invariant Wavelet Transform (TIWT). The proposed TIWT method remains the edge of the original signal efficiently. Additionally TIWT based denoising is used to suppress Pseudo Gibbs phenomenon. In this paper an attempt has been made to review the methodology of denoising the PD signals and shows that the proposed denoising method results are better when compared to other wavelet-based approaches like Fast Fourier Transform (FFT), Discrete Wavelet Transform (DWT), by evaluating five different parameters like, Signal to noise ratio, Cross-correlation coefficient, Pulse amplitude distortion, Mean square error, Reduction in noise level.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.266-273
• /
• 2010

태양광 인버터(PCS)는 태양전지에서 발생된 전력을 계통에 연계시키는 장치이다. IEEE 1547 규격에 따르면 PCS에서 발생되는 고조파왜곡은 5% 이내여야만 한다. 일반적으로 PCS에서 계통으로 유입되는 고조파 검출은 전용 계측장치에 의해서 측정된다. 초기에 규격에 맞게 설계된 PCS의 고조파가 소자들의 노화나 제어기 고장에 의해 증가하게 될 경우 발전을 중지하거나 경보를 발생시켜야 한다. 기존의 상용화된 시스템에는 이러한 기능이 존재하지 않는다. 본 연구에서는 PCS 내부에 고조파왜곡을 실시간으로 측정하는 알고리즘을 내장시키는 방법에 대해 연구한다. 고성능 32-bit 부동소수점 DSP를 이용한 PCS를 제작하고 256-point DFT(Discrete Fourier Transform) 알고리즘을 이용하여 1[ms] 이내에 하모닉 계수를 계산하였다. 제어기 제작에 대한 설명과 실험 결과로서 연구의 타당성을 입증하였다.

• 환경영향평가
• /
• 제24권6호
• /
• pp.607-618
• /
• 2015

국가환경시료은행에서는 과거 환경 재현을 목적으로 다양한 생태계를 대표하는 시료를 채취 저장하고 있다. 지난 5년간 8종의 생태계 시료종이 엄격한 표준운영절차(SOP)에 따라 채취되어 왔으나 수행절차에 대한 비용효율성이나 시료의 대표성에 대한 논리적 통계적 검증은 이루어 진 바 없었다. 따라서 본 연구에서는 시료채취 및 분석과정으로 구성된 표준운영절차의 각 단계에서 비롯되는 불확도(uncertainty) 수준에 대한 평가를 실시하였다. 이를 위해 표준운영절차에서 규정된 채취방법에 의해 채취된 두 지역의 침엽수 시료를 대상으로 중복시료(duplicate sample)를 채취하였고, 이에 대한 중복분석결과를 대칭설계(balanced design)하여 분산분석을 실시하였다. 시료채취 및 분석의 각 단계에서 산출된 불확도 수준은 각 해당지역 대표시료에 대한 측정불확도로 통합되었다. 그 결과 시료채취단계와 분석단계 중 측정불확도의 대부분은 시료채취단계에서 비롯되고 있음이 확인되었다. 또한 측정불확도 수준을 저감하기 위해서는 표준운영절차에서 규정하고 있는 시료채취방법이 개선되어야 하는데, 본 연구에서 확인된 채취지역의 상대적으로 큰 국지적 이질성(small-scale heterogeneity)으로 말미암아 지역내에서의 채취대상 개체수를 확대하는 것보다 각 개체에서 채취되는 시료량을 늘리는 것이 비용효율적인 개선에 대한 기준이 되었다. 또한 채취방법이 채취지역에서 분포하는 개체들의 이질성을 충분히 극복하며 대표성을 확보할 수 있는가에 대한 검증으로서 분산분석을 적용한 결과, 지역전체의 변화량보다 국지적 변화량이 더 커야 하는 조건을 제시할 수 있었다.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2015

This paper proposes a 2.4 GHz RF oscillator with a very low close-in phase noise performance. This is composed of a low frequency crystal oscillator and three frequency multipliers such as two doubler (X2) and one tripler (X3). The proposed oscillator is implemented as a hybrid type circuit design using a discrete silicon bipolar transistor. The measurement results of the proposed oscillator structure show -115 dBc/Hz close-in phase noise at 10 kHz offset frequency, while only dissipating 5 mW from a 1-V supply. Its close-in phase noise level is very close to that of a low frequency crystal oscillator with little degradation of noise performance. The proposed structure which is consisted of a low frequency crystal oscillator and a frequency multiplier provides new method to implement a low power low close-in phase noise RF local oscillator.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.107-111
• /
• 1999

We developed the experimental function (ERF) which can be used for the numerical curve fitting analysis in photoelectron spectroscopy (PES). We selected the core-levels of Ag 3d5/2 and Au 4f7/2 to obtain the ERF from the measured core-level spectra. For the numerical fourier transformation we applied the fast transform (FFT) algorithm. we considered optical (Wiener) filtering with the FFT due to noise and used Hann window function to remedy the information leakage in frequency domain due to discrete and finite sampling of measurement. The comparison of the curve fitting results using the ERF obtained in this work and the mathematical response function with a gaussian in the conventional approach shows clearly the improvement of the curve fitting analysis.