• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.12-15
• /
• 2002

In this paper, we fabricated a electro-chemical discharge machine for drilling microscopic glass hole. In this research, we used a glass plate and NaOH solution. From the experimental result, we knew that the change of voltage wave was caused by drilling microscopic hole of glass using electro-chemical discharge method. So, we can give a function of the power auto stop to electro-chemical discharge machine with the change of voltage wave.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.123-124
• /
• 2008

Battery is one of the emergency power. Battery reliability is a very important to keep up the minimum of building capabilities in case of interruption of electric power. Instantaneous discharge test is carried out for measuring transient voltage change(${\Delta}V$) and internal instantaneous impedance(Z), and then it is compared with discharge test results for the estimating the battery capacity. As a result, it was confirmed that the voltage change(${\Delta}V$) and the instantaneous impedance of the batteries failed in actual discharge test were higher that those of the sound batteries. Such an instantaneous discharge test can be a diagnosis of battery sound.

• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.74-78
• /
• 2017

The discharge characteristics of the radio frequency (RF) surface dielectric barrier discharge have been simulated for the investigation of the ratio of the ion transit time to the RF period. From one-dimensional particle-in-cell (PIC) simulation for a planar dielectric barrier discharge (DBD), it was observed that the high-frequency driving voltage confines the ions in the plasma because of a shorter RF period than the ion transit time. For two-dimensional surface dielectric barrier discharges, a fluid simulation is performed to investigate the characteristics of RF discharges from 1 MHz to 40 MHz. The ratio of the peak density to the average density decreases with the increasing frequency, and the spatiotemporal discharge patterns change abruptly with the change in the ratio of ion transit time to the RF period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1533-1537
• /
• 2005

The recent rainfall has happened to exceed the design rainfall after 1990 often, due to the characteristic of the rain to be changed. So, it is failing the ability safety of flood defense equipments to exist. This study analyzed the rainfall of Busan in 2003 since 1961 through the FARD2002(Frequency Analysis of Rainfall Duration). The result is equal to the thing which the design rainfall increased a little since 1991. The change of design rainfall created the result to be a flood discharge increase. This study investigated about the impact to influence on the river bank according to the change of flood discharge, the rainfall pattern change as well. This study used the program of HEC-RAS with HEC-HMS and calculated flood discharge with flood level of river. The result is equal to the thing which the computation became a flood level which exceed 50year(River design criteria-Korea water resources association 2002) criteria with 30year(River establishment criteria-Ministry of construction & transportation 1993), because of an area of impermeability increased of model basin.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.125-132
• /
• 2008

Generally, stationary is considered as a basic assumption in frequency analysis. However, rainfall and flood discharge are changing due to the climate change and climate variability. Therefore, there is a new opinion that changing pattern of rainfall and flood discharge must be considered in frequency analysis. This study suggests the flood frequency analysis methodology using SIR algorithm which was developed from bootstrap could be used for considering climate change. Than is, SIR algorithm is selected for resampling method considering changing pattern of flood discharge and it has been used for resampling method with likelihood function. Resampled flood discharge data considering the increase of flood discharge pattern are used for parametric flood frequency analysis and this results are compared with frequency analysis results by Bootstrap and original observations. As the results, SIR algorithm shows the greatest flood discharge than other methods in all frequencies and this may reflect the increasing pattern of flood discharge due to the climate change and climate variability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.671-676
• /
• 2015

Control of surface runoff from upland soil is essential to reduce nonpoint source pollution. The use of non-woven fabric as a soil cover can be helpful to control surface runoff. The field experiment was conducted to evaluate the furrow cover effects of black non-woven fabric on the nutrient discharge from upland soil used for red pepper cultivation. The experimental plots consisted of chemical fertilizer (CF), cow manure compost (CMC), and pig manure compost (PMC) treatment. Each nutrient material treatment plot has control (no furrow cover (NFC)) and black non-woven fabric cover treatment, respectively. The amount of nutrient application was chemical fertilizer of $190-112-149(N-P_2O_5-K_2O)kgha^{-1}$, cow manure compost of $29.5tonha^{-1}$, and pig manure compost of $7.9tonha^{-1}$ as recommended amount after soil test for red pepper cultivation. Compared to control (NFC), furrow cover treatment with black non-woven fabric reduced the amount of T-N discharge by 50% at CF treatment, 36.9% at CMC treatment, and 44.8% at PMC treatment. Furrow cover treatment with black non-woven fabric reduced the amount of T-P discharge by 37.1% at CF treatment, 49.9% at CMC treatment, and 63.4% at PMC treatment compared to control (NFC). The production of red pepper did not show significant difference. There was no weed occurring in furrow cover treatment plots with black non-woven fabric. Results from this study showed that the furrow cover with black non-woven fabric could play a significant role in reduce nutrient discharge from upland soil used for red pepper cultivation.

• New & Renewable Energy
• /
• v.4 no.2
• /
• pp.94-104
• /
• 2008

The change of water discharge capability of sluice caisson for tidal power plant according to installation of the rubble mound was investigated by performing laboratory experiment. The experiment was carried out in an open channel flume with a great care to measure flow rate and water level in the flume accurately. Eight different sluice caisson models were used in the experiment. The water discharge capabilities of seven sluice models decreased with respect to the placement of the rubble mound, while increased for only one sluice model. On average, the values of discharge coefficient decreased by approximately 10% when the sluice models were placed on the rubble mound. It is concluded that the shape of the rubble mound can affect the water discharge capability of the sluice caisson, so that its shape should be significantly considered in the design of the sluice caisson, especially when it is deployed in a site of relatively deeper depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.645-654
• /
• 2018

Extreme rainfall events caused severe damage to human life and property due to the inundation in major urban areas. In particular, the increase in the intensity of rainfall due to climate change causes changes in the design flood discharge. As a result, it causes uncertainty in the design criteria of hydraulic structures. However, quantitative analysis results have not been provided due to the limitations of climate scenarios and the uncertainty in climate changes. Therefore, this research chose Bulgwangcheon basin as the target basin to analysis the discharge considering climate change. As the result, it is necessary to strengthen design standards since the amount of discharge increased by 14.2% even in the near future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.28-39
• /
• 2011

This study estimates the characteristics of flow loads by classification items of the Ministry of Environment and by land cover change using HyGIS-SWAT. The result of analyzing the land cover change using the classification items shows that the urban area and the farmland area in Mishim-cheon and Gap-cheon are expanding while the forest area is decreasing. The result of analyzing the characteristics of classification items shows that peak discharge increases and total yearly discharge decreases in Mushim-cheon. The result of analyzing the characteristics by data-construction period shows that peak discharge decreases but total discharge increases in Gap-cheon. Three land cover change scenarios are applicable to the expansion of urban area and farmland area. According to the result of application, urbanization influences and Farmland area expansion influences increase peak discharge, total yearly discharge and sediment concentration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.145-145
• /
• 2011

Recently, multi-hole electrode RF capacitively coupled plasma discharge is being used in the deposition of microcrystalline silicon for thin film solar cell to increase the speed of deposition. To make efficient multi-hole electrode RF capacitively coupled plasma discharge, the hole diameter is to be designed concerning the plasma parameters. In past studies, the relationship between plasma parameters such as pressures and gas species, and hole diameter for efficient plasma density enhancement is experimentally shown. In the presentation, the relationship between plasma deriving frequency and hole diameter for efficient multi-hole electrode RF capacitively coupled plasma discharge is shown. In usual capacitively coupled plasma discharge, plasma parameter, such as plasma density, plasma impedence and plasma temperature, change as frequency increases. Because of the change, the optimum hole diameter of the multi-hole electrode RF capacitively coupled plasma for high density plasma is thought to be modified when the plasma deriving frequency changes. To see the frequency effect on the multi-hole RF capacitively coupled plasma is discharged and one of its electrode is changed from a plane electrode to a variety of multi-hole electrodes with different hole diameters. The discharge is derived by RF power source with various frequency and the plasma parameter is measured with RF compensated single Langmuir probe. The shrinkage of the hole diameter for efficient discharge is observed as the plasma deriving frequency increases.