• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.400-403
• /
• 2002

The fundamental experiments for measuring soft x-ray characteristics from the vacuum capillary are described. These experiments were primarily performed in order to generate line spectra such as x-ray lasers. The generator consists of a high-voltage power supply, a polarity-inversion ignitron pulse generator, a turbo-molecular pump, and a radiation tube with a capillary. A high-voltage condenser of 200 nF in the pulse generator is charged up to 20 kV by the power supply, and the electric charges in the condenser are discharged to the capillary in the tube after closing the ignitron. During the discharge, weakly ionized plasma forms on the inner and outer sides of a capillary. In the present work, the pump evacuates air from the tube with a pressure of about 1 mPa, and a demountable capillary was developed in order to measure x-ray spectra according to changes in the capillary length. In this capillary, the anode (target) and cathode elements can be changed corresponding to the objectives. The capillary diameter is 2.0 mm, and the length is adjusted from 1 to 50 mm. When a capillary with aluminum anode and cathode electrodes was employed, both the cathode voltage and the discharge current almost displayed damped oscillations. The peak values of the voltage and current increased when the charging voltage was increased, and their maximum values were -10.8 kV and 4.7 kA, respectively. The x-ray durations observed by a 1.6 ${\mu}$m aluminum filter were less than 30 ${\mu}$s, and we detected the aluminum characteristic x-ray intensity using a 6.8 ${\mu}$m aluminum filter. In the spectrum measurement, two sets of aluminum and titanium electrodes were employed, and we observed multi-line spectra. The line photon energies seldom varied according to changes in the condenser charging voltage and to changes in the electrode element. In the case where the titanium electrode was employed, the line number decreased with corresponding decreases in the capillary length. Compared with incoherent visible light, these rays from the capillary were diffracted and diffused greatly after passing through two slits.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.27-38
• /
• 1999

We constructed a wire-cylinder type pulsed corona discharge system for $NO_x$ removal, which was operated in room temperature. A emission spectrometer was built with a boxcar averager and monochrometer equipped with photo-multiplier tube detector. The sensitivity of the emission spectrometer was greatly improved by synchronizing the emission spectrometer with pulsed corona discharge system using a triggered spark-gap switch. $N_2$ spectrum($c^3{\Pi}_u{\rightarrow}X^1{\Sigma}_g{^+}$) was measured in the range of 300 - 450 nm and oxidizing OH radical emission($A^2{\Sigma}^+{\rightarrow}X^2{\Pi}$) was measured in case $N_2$ was supplied with water bubbling. As wet gas composition of inlet $N_2$ supplied in the discharge system increased, the intensity of OH emission was increased and saturated at wet gas composition 50%. We also investigated additive effect of $C_2H_4,\;H_2O,\;H_2O_2$ on the intensity of OR emission and $NO/NO_2/NO_x$ reduction and analysed the related reaction mechanism in corona discharge process. $H_2O_2$ additive increased the intensity of OH emission and $NO/NO_x$ reduction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1657-1658
• /
• 2006

An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter. To solve these problems of CCFL, EEFL (External Electrode Fluorescent Lamp) is introduced. Because electrode of EEFL is on the outer surface of discharge tube, the electrode is perfectly prevented from the sputtering by accelerated ions. And it is possible to drive the many CCFLs at the same time, because EEFL shows the positively resistant characteristic. But EEFL has the large non-radiative power loss in sheath. In this study the novel electrode structure was introduced in order to reduce non-radiative power loss in sheath of EEFL. The novel electrode structure comes from the idea to combine conceptually capacitive discharge with inductive discharge. Thus, this study verifies the change in the optical characteristics according to the change in electrode structure through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL electrode structure and brightness by measuring the optical characteristics.

• 대한화학회지
• /
• 제50권1호
• /
• pp.14-22
• /
• 2006

방전을 이용한 화학반응기의 기본 모델은 관통형 속 빈 음극 방전셀을 응용하였다. 최근 글로우 방전은 원자분광학에 있어서 방출원으로서의 역할과 더불어 원자화 장치로서 점차적으로 그 연구의 범위를 넓혀가고 있으며, 미량분석, 철강분석, 표면 분석 등에 널리 사용되고 있으며 타 분석 기기와의 접목 등을 통하여 상당한 기술적 성과가 이루어지고 있다.1 또한 본 연구 이전에 기초적인 글로우방전의 성질과 방출 특성에 대해서도 여러 차례 재검토된 바 있어 본 실험에 활용할 수 있었다.2-3 지난 1993년에는 저온의 플라즈마를 이용하여 대기중의 유독가스의 처리에 대한 연구가 발표되었으며, 이 논문에 의하면 연속적인 공기의 흐름 하에서 직류 글로우 방전을 이용하면 유해성 가스인 SO2와 NO의 제거가 가능하다고 보고되었다.4 이를 바탕으로 본 연구에서는 안정적인 공기 플라즈마의 형성과 관통형 양, 음극관 안으로 모든 흐름공기가 음 글로우(Negative glow)영역을 통과하도록 고효율 반응기를 설계하였다. 현재 본 연구에서 디자인한 속 빈 음극관 형 글로우 방전은 경제성이 우수하며 사용하기 쉽다는 것 외에도 방출원 으로서의 장점도 제공함을 관찰하였다.

• 조명전기설비학회논문지
• /
• 제20권7호
• /
• pp.58-64
• /
• 2006

최근 탈취, 탈색, 정수처리 및 배연가스의 정화에 많이 이용되고 있는 오존의 효과적인 발생에 많은 관심이 모아지고 있다. 전기 방전에 의한 오존 발생 방법 중 유전체 배리어 방전이 보다 낮은 전력을 소모하며, 또한 저전압 동작이 가능하여 가장 효과적인 것으로 생각되고 있다. 본 연구에서는 오존발생농도 및 에너지효율을 개선하기 위하여 알루미나 유전체 및 알루미나 유전체와 알루미나 비드를 충진한 무성방전관을 제작하여 무성방전특성을 연구하였다. 또한 오존발생특성을 무성방전특성과 연관하여 논하였으며, 특히 방전시 유전체에 축적되는 벽전하 및 소비전력특성의 관점에서 논하였다. 결과, 비드를 가진 방전관의 경우 축적되는 벽전하량은 비드가 없는 방전관에 비하여 약 2.5배 정도였으며, 발생되는 오존농도 및 에너지 수율 또한 개선되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2057-2058
• /
• 2011

We have studied that a effect saving temperature of instantaneous heater using an economical bidet due to change Silicon-Tube. The results, we have found that the existing instantaneous heater is reduced 15 [%], 20 [%] better than a new product instantaneous heater as a discharge water [${\ell}$/min] with temperature and ${\nabla}$ value, respectively. Therefore, we have showed that the innovative effect of a working process and the cost reduction because an economical bidet due to change Silicon-Tube.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.78-83
• /
• 2003

The aim of this study is to investigate the effect of hydrogen embrittlement od Zr-2.5Nb CANDU pressure tube. The test were performed at three hydrogen contents for transverse tensile and CCT specimens while the test temperatures were changed (RT to 300$^{\circ}C$). The specimens were directly machined from the tube retaining original curvature using electric discharge machine. Both the transverse tensile and the fracture toughness tests showed the hydrogen embrittlement clearly at RT but this phenomenon was disappeared while the test temperature arrived over 250$^{\circ}C$. From the fracture toughness test, it was found that fracture toughness dJ/da was increased up to 200$^{\circ}C$ and then decreased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.246-248
• /
• 2002

This paper presents a high-frequency voltage source inverter for silent corona discharge ozonizer application, which is characterized by the power control based on pulse density modulation (PDM). The PDM inverter produces either a square -wave ac-voltage state or a zero-voltage state at its ac terminals to control the average output voltage under constant do voltage and operating frequency. This results in a wide range of power control in the silent corona discharge load with a strong nonlinear characteristics. And proposed addition circuit for maintain discharge on the center of the airgap. In this paper, schemed equivalent electric circuit of the discharge electrode for simulation. Finally, the effectiveness of this discharge tube character of silent corona ozonizer is investigated in the simulation results.

• 한국광학회지
• /
• 제16권5호
• /
• pp.450-455
• /
• 2005

본 논문에서는 기존의 TE(transverse excitation) 방식과 달리 LE(longitudinal excitation) 방식을 사용하여 유전체 표면을 따라 발생하는 미끄럼 방전에 의해서도 질소레이저 발진이 가능함을 보였다. 이는 방전여기 방식인 엑시머 레이저 등의 기체 레이저에서도 미끄럼 방전을 이용한 레이저 발진이 가능함을 의미한다. 또한, 레이저빔의 형상이 공진기의 원둘레를 따라 발진이 되어 빔이 환 모양으로 출력이 됨을 보임에 따라 직사각형이나 타원형의 빔 등 폐곡선을 이루는 어떤 특정한 형태의 질소레이저 빔도 만들어 낼 수 있다는 가능성을 보였다. 레이저의 동작특성인 출력과 안정성은 TE 방식에 비해서도 뒤떨어지지 않는 다는 것을 알 수 있었으며, 공진기의 지름이 2배 증가하면 미끄럼 방전이 일어나는 표면이 2배, 체적은 4배 증가하여 그에 따른 방전간극과 유동률이 비례관계에 있음을 알 수 있었다.

• 기술사
• /
• 제15권1호
• /
• pp.36-40
• /
• 1982

This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.