• Journal of the Korean Geotechnical Society
• /
• v.26 no.3
• /
• pp.5-12
• /
• 2010

In this study, in order to clarify the effect of the direction of cyclic shear on the post-earthquake settlement the multi-directional shear tests were carried out for Toyoura Japan standard sand, Genkai natural sand, Kaolinite and the Granulated Blast Furnace Slag (GBFS). The diameter and the height of the specimen are 75 mm and 20 mm, respectively. In a series of tests, the number of strain cycles was adjusted as n=5, 20, 30, 100, 200 and the shear strain amplitudes were varied from 0.1% to 1.0%. The relative densities of each samples were also adjusted as Dr=50, 60 and 70%. From the test results for Toyoura sand and GBFS, it is clarified that the post-earthquake settlement is relatively large at the small relative density and becomes large with the shear strain amplitude. When the influence of difference on the direction of cyclic shear decreases, the post-earthquake settlement strain for Toyoura sand is converged to a constant value, but the GBFS increases with the number of strain cycles. In addition, the post-earthquake settlement is in the order of Kaolinite > Toyoura sand > Genkai sand > GBFS.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.2
• /
• pp.589-600
• /
• 2015

The purpose of this study was to verify the analysis of differences between importance and satisfaction of destination attractiveness for the national marine sports games using IPA method. By doing so, this study aimed to utilize the result of study for a practical marketing strategy in operating and establishing Korean marine sports market circumstances. The participants of this study consisted of 328 who were participated in marine sport event (yacht, fin-swimming, canoe, triathlon and so on) of 9th national marine sports games. Samples were extracted by convenient sampling method. A total 328 questionnaires were collected in this study except data which did not respond or trustless responded. In data processing, Cronbach's ${\alpha}$, frequency analysis, paired t-test and Importance-Performance Analysis were performed through SPSS 20.0. The results were as follows. First, I quadrant included Programs Multiplicity, Pamphlet, Stand preparations, Food Cleanliness, Effective Progress, Guide Know-How, Food taste. Third, II quadrant included Pre-Publicity, Internet Information, Proper Food Price, Shade Facilities, Convenient Parking, Restroom Cleanliness, Number of Restroom, Safety Facilities. Fourth, III quadrant included Entertaining Program, Number of Guide, Local Culture, Game Progress, Directional Sign. Fifth, IV quadrant included Performance Program, Well-Matched Event, View Distance, Various Food.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.914-923
• /
• 2002

Recently, there has been considerable interest in micro gyroscopes made of silicon chips. It can be applied to many micro-electro-mechanical systems (MEMS): devices for stabilization, general rate control, directional pointing, autopilot systems, and missile control. This paper shows how the mechanical design of the gyroscope can be done using axiomatic design, followed by the application of the Taguchi robust design method to determine the dimensions of the parts so as to accommodate the dimensional variations introduced during manufacturing. Functional requirements are defined twofold. One is that the natural frequencies should have fixed values, and the other is that the system should be robust to large tolerances. According to the Independence Axiom, design parameters are classified into a few groups. Then, the detailed design process is performed fellowing the sequence indicated by the design matrix. The dimensions of the structure are determined to have constant values fur the difference of frequencies without consideration of the tolerances. It is noted that the Taguchi concept is utilized as a unit process of the entire axiomatic approach.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.720-729
• /
• 1998

Immunohistochemical technique of the c-fos primary gene protein, Fos, was used to analyze the effects of external factors on the neuronal activities in the periaqueductal gray(PAG) of the intact rats, sham-operated rats and post-operated stress control rats. In addition, the number of Fos positive neurons has been evaluated to verify the effects of cannula implantation and veratridine treatment on the neuronal activities in PAG area. The results were summerized as follow : 1. There was no significant difference in the number of Fos positive neurons observed in the caudal and middle portion of lateroventral PAG from cannula implanted rats and sham operated rats. 2. The number of Fos positive neurons in the PAG was not changed by the stress induced by connection of collecting tube to rats for 12 hours as compared to that of intact rats. 3. In the saline treated group, the Fos immunoreactivity in the PAG did not changed at 30 minutes and 1 hour after saline treatment as compared to that of intact rats. However, the number of Fos positive neurons was significantly increased at 2 hours after treatment compared to that of saline treated rats at 30 minutes after treatment. 4. The Fos immunoreactivity was dramatically increased at 30 minutes, 1 hour and 2 hours after veratridine treatment as compared to those of saline treated groups. The number of Fos immunoreative neurons showed the maximal level at 2 hours after veratridine treatment. 5. The Fos positive neurons induced by saline and veratridine treatment were mainly distributed in front of the microdialysis window. These results suggest that new microdialysis demonstrated in this study improves efficiency and accuracy to confine the neuronal activity in front of microdialysis window site. Moreover, this directional specificity allows us to locate probe tips adjacent to the brain area of the interest site rather than centering the probes within that brain area. Finally, This microdialysis method can be used to dialyse the neurotransmitters using concious and freely moving rats.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.197-204
• /
• 2012

In this thesis, studied the method to minimize the changes in frequency response and level due to the variation of the distance from the source to the microphone. selecting three microphones (omni directional, cardioid, super cardioid) which are being used generally, frequency responses were measured in accordance with the distance changes. Gotten the difference from the reference as the result of measurement, changed responses for each frequency range were compensated in comparison of the original human vocal source. In low frequency range, the low frequency boost caused by the proximity effect and decrease in accordance with the distance were compensated. The variation in mid-frequency range is comparatively small, however since the mid-range is the most important part of the human vocal signal, were compensated the mid-frequency range in comparison of the reference. The human vocal signal variation in high frequency range is extremely small and the high frequency is compensated close to the original source without difficulty. Understanding the microphone characteristics and compensations, this study showed that the response can be maintain among the change of the distance from the source to the microphone.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.1
• /
• pp.55-62
• /
• 2017

The SRP (Solar Radiation Pressure) model has always been an issue in the dynamic GPS (Global Positioning System) orbit determination. The widely used CODE (Center for Orbit Determination in Europe) model and its variants have nine parameters to estimate the solar radiation pressure from the Sun and to absorb the remaining forces. However, these parameters show a very high correlation with each other and, therefore, only several of them are estimated at most of the IGS (International GNSS Service) analysis centers. In this study, we attempted to numerically verify the correlation between the parameters. For this purpose, a bi-directional, multi-step numerical integrator was developed. The correlation between the SRP parameters was analyzed in terms of post-fit residuals of the orbit. The integrated orbit was fitted to the IGS final orbit as external observations. On top of the parametric analysis of the SRP parameters, we also verified the capabilities of orbit prediction at later time epochs. As a secondary criterion for orbit quality, the positional discontinuity of the daily arcs was also analyzed. The resulting post-fit RMSE (Root-Mean-Squared Error) shows a level of 4.8 mm on average and there is no significant difference between block types. Since the once-per-revolution parameters in the Y-axis are highly correlated with those in the B-axis, the periodic terms in the D- and Y-axis are constrained to zero in order to resolve the correlations. The 6-hr predicted orbit based on the previous day yields about 3 cm or less compared to the IGS final orbit for a week, and reaches up to 6 cm for 24 hours (except for one day). The mean positional discontinuity at the boundary of two 1-day arcs is on the level of 1.4 cm for all non-eclipsing satellites. The developed orbit integrator shows a high performance in statistics of RMSE and positional discontinuity, as well as the separations of the dynamic parameters. In further research, additional verification of the reference frame for the estimated orbit using SLR is necessary to confirm the consistency of the orbit frames.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.6
• /
• pp.275-282
• /
• 2018

Two different modes of rolling were applied to control the texture development in tantalum sheet. In the conventional uni-directional rolling, the typical rolling textures of a body-centered cubic metal which was primarily composed of <110>//(rolling direction) was developed. In a cross rolling where the specimen was rotated by $90^{\circ}$ between each pass, the rotated cube components, i.e. {100}<011> were greatly reinforced. The prediction of lattice rotation by the full-constraint Taylor model showed that the high stability and the symmetry of the rotated cube components caused their strengthening in cross-rolling. The two specimens were heated to $1,100^{\circ}C$ at $9^{\circ}C/min$and held for 1 hour for annealing, then cooled to room temperature in atmosphere. In spite of the significant difference in the deformation textures, the annealing textures were very similar. They developed strong <111>//(plane normal) components with negligible intensity at the rotated cube components, which was attributed to the negligible capability of the latter components to provide effective recrystallized grains.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.32-40
• /
• 2007

In this paper, the crease extraction method is proposed to improve the accuracy of feature extraction within the fingerprint image. First of all, for each pixel in fingerprint image, it calculates the average grey level and variance to determine if the current pixel composes the crease, and estimates the direction of crease. Secondly, once the direction of every pixel in crease candidate area is estimated, it is decomposed into 8 different images, depending on their direction. The properties of crease consists of the length of the crease candidate area, the correspondence between the crease direction and the pixel distribution direction, the difference between the ridge direction and the pixel distribution direction, and finally the grey level of the candidate pixels. The proposed method finally extracts the crease from the crease clusters estimated from directional images. In conclusion, applying the proposed method improved the accuracy of overall feature extraction by 91.4% by accurately and precisely extracting the crease from fingerprint image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.20-28
• /
• 2000

The error diffusion algorithm is good for reproducing continuous image to binary image. However the reproduction of edge characteristic is weak in power spectrum analysts of display error. In this paper, an error diffusion method which include pre-filter algorithm for edge characteristic enhancement is proposed Pre-filter algorithm is organized horizontal and vertical directional differential value and weighting function of pre-filter First, it is obtained the horizontal and vertical differential value from the peripheral pixels in original image using $3{\times}3$ Sobel operator Secondly weighting function of pre-filter is composed by function including absolute value and sign of differential value The improved Error diffusion algorithm using pre-filter, present a good result visually which edge characteristic is enhanced. The difference between orignal image and halftoning image is compared with edge-enhanced error diffusion algorithm by measuring the radially averaged power spectrum density.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.307-315
• /
• 2014

A new modified lossless intra-coding method based on a cross residual transform is applied to HEVC(High Efficiency Video Coding). The HEVC standard including a multi-directional spatial prediction method to reduce spatial redundancy encodes the pixels in a PU (Prediction Unit) by using neighboring pixels. In the new modified lossless intra-coding method, the spatial prediction is performed by pixel-based DPCM but is implemented by block-based manner by using cross residual transform on the HEVC standard. The experimental results show that the new lossless intra-coding method reduces the bit rate of approximately 8.4% in comparison with the lossless-intra coding method in the HEVC standard and the proposed method results in slightly better compression ratio than the JPEG2000 lossless coding.