• Archives of Pharmacal Research
• /
• v.9 no.4
• /
• pp.223-227
• /
• 1986

The structure of alclofenac was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from chloroform solution in monoclinic system space group $C_{2}$/c, with Z = 8, a = 8, a = 23.349(9), b =14.295 (3), c = 7.192 (2) $\AA$, $\beta$ = 111.32 (3)$^{\circ}$, and $d_{dbs}$ = 1.29, $d_{caic}$ = 1.30. The structure was solved by direct method and refined by least-squares procedure to the final R-value being 0.044 for 1055 reflections (F ${\geq}6${\sigma}$(F)). The molecules are dimerized by OH..O type hydrogen bonds related by two-fold axis.

• Coupled systems mechanics
• /
• v.6 no.3
• /
• pp.351-367
• /
• 2017

In this article, the multiphysics response of magneto-electro-elastic (MEE) cantilever beam subjected to thermo-mechanical loading is analysed. The equilibrium equations of the system are obtained with the aid of the principle of total potential energy. The constitutive equations of a MEE material accounting the thermal fields are used for analysis. The corresponding finite element (FE) formulation is derived and model of the beam is generated using an eight noded 3D brick element. The 3D FE formulation developed enables the representation of governing equations in all three axes, achieving accurate results. Also, geometric, constitutive and loading assumptions required to dimensionality reduction can be avoided. Numerical evaluation is performed on the basis of the derived formulation and the influence of various mechanical loading profiles and volume fractions on the direct quantities and stresses is evaluated. In addition, an attempt has been made to compare the individual effect of thermal and mechanical loading with the combined effect. It is believed that the numerical results obtained helps in accurate design and development of sensors and actuators.

• Journal of Korea Port Economic Association
• /
• v.19 no.1
• /
• pp.139-159
• /
• 2003

This study deals sith some problems of foreign direct investment and seeks for the ways of activating foreign direct investment (hereafter F.D.I.) by analyzing the Korean economic structure that is faced with the neo-protectivism and nationalism of the advanced or foreign countries currently. During a transformational process in the transitional period of world trade environment, it is necessary for Korea not only to learn the higher technology for advanced countries, but also to apply techonology to their economic structure in order to enter into competition with the advanced countries. Based on the experiences and accomplishments from their investments, Korean enterprises should turn their business into F.D.I. and act appropriately in order to keep the balance between indoor and outdoor investment. Looking through the ways to activate F.D.I., we may make conclusions as follows: 1. Government policy transparency 2. Prudential Macro Economic policy 3. International policy coorperation system 4. Solidification of Foreign Commercial intercourse to Developing countries 5. Globalixation base of domestic coorperation 6. High efficiency- low cost of business coorperation enterprise 7. Attacktive investiestment strategies on conclusive competive advantage 8. Multilateral investment Area 9. New recognixation on marketing investment etc. F.D.I. strategies

• Journal of Magnetics
• /
• v.15 no.2
• /
• pp.64-69
• /
• 2010

This paper describes the development of a novel transverse flux linear motor (TFLM) excited by permanent magnets (PMs). It combines the advantage of two different TFLMs and produces high thrust with reduced normal force. The magnetic field is analyzed by combining the three-dimensional (3D) equivalent magnetic circuit network (EMCN) method with 2D finite element analysis. The experimental findings of the prototype motors are in good agreements with the analysis results, and demonstrate the potential of the proposed motor as a direct drive requiring relatively long displacement of a mover.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1464-1469
• /
• 2008

A CMOS Gm-C filter with variable cutoff frequency applicable for using in the direct conversion receiver is designed. The designed filter comprises the CMOS differential transconductors, and the gm of the transconductor is controlled by the bias voltage. This configuration can compensate variant of the cutoff frequency which could be generated by external noises, and also be used in multiband receiver. As a results of HSPICE simulation, the control range of the cutoff frequency is $1.5MHz{\sim}3.5MHz$ and the gain control range is $-2.8dB{\sim}2.6dB$. The layout of the designed 5th-order Elliptic low-pass filter is performed to fabricate a chip using $2.5V-0.25{\mu}m$ CMOS processing parameter.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.110-114
• /
• 2007

In this paper we present 3-D Navigation View, a three-dimensional visualization of indoor environment which serves as an intuitive and unified user interface for our developed indoor location tracking system via Virtual Reality Modeling Language (VRML) in web environment. The extracted user's spatial information from indoor location tracking system was further processed to facilitate the location indication in virtual 3-D indoor environment based on his location in physical world. External Authoring Interface (EAI) provided by VRML enables the integration of interactive 3-D graphics into web and direct communication with the encapsulated Java applet to update position and viewpoint of user periodically in 3-D indoor environment. As any web browser with VRML viewer plug-in is able to run the platform independent 3-D Navigation View, specialized and expensive hardware or software can be disregarded.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.253-258
• /
• 2015

The 3D printing is any of various processes for making a three dimensional object of almost any shape from a 3D model. Recently, a rapidly expanding hobbyist and home-use market has become established with the inauguration of the open-source RepRap and Fab@Home projects. However, this causes problems regarding copyright protection and usage of illegal 3D data. In this paper, we developed a 3D printing open-market system, which guarantees copyright protection using the remote 3D printing without direct distribution of 3D design data. Because most of the home-use 3D printers are FFF (Fused Filament Fabrication) based on NC code system, open-market system uses FFF 3D printers. Also, open-market system inspects the uploaded 3D model data, so the system can prevent distribution of illegal model data such as weapons, etc.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.595-604
• /
• 2016

Utilizing a standard 130-nm CMOS process, a RF frontend is designed at 24 GHz for automotive collision avoidance radar application. Single IF direct conversion receiver (DCR) architecture is adopted to achieve high integration level and to alleviate the DCR problem. The proposed frontend is composed of a two-stage LNA and downconversion mixers. To save power consumption, and to enhance gain and linearity, stacked NMOS-PMOS $g_m$-boosting technique is employed in the design of LNA as the first stage. The switch transistors in the mixing stage are biased in subthreshold region to achieve low power consumption. The single balanced mixer is designed in PMOS transistors and is also realized based on the well-known folded architecture to increase voltage headroom. This frontend circuit features enhancement in gain, linearity, and power dissipation. The proposed circuit showed a maximum conversion gain of 19.6 dB and noise figure of 3 dB at the operation frequency. It also showed input and output return losses of less than -10 dB within bandwidth. Furthermore, the port-to-port isolation illustrated excellent characteristic between two ports. This frontend showed the third-order input intercept point (IIP3) of 3 dBm for the whole circuit with power dissipation of 6.5 mW from a 1.5 V supply.

• Biomolecules & Therapeutics
• /
• v.9 no.3
• /
• pp.209-217
• /
• 2001

This study was attempted to investigate on renal effect of ($\pm$)6-chloro-7,8-dihydroxy-1-phenol 2,3,4,5-tetrahydro-lH-3 benzazepine (SKF 81297), dopamine $D_1$ receptor agonist, in dog. SKF 81297, when gluten intravenously, produced diuretic action along with the increases of renal plasma flow (RPF), glomerular filtration rate (GFR), amounts of N $a^{+}$ and $K^{+}$ excreted into urine ( $E_{Na}$ , $E_{K}$) and osmolar clearance ( $C_{osm}$). It also decreased the reabsorption rates of N $a^{+}$ and $K^{+}$ in renal tubule ( $R_{Na}$ , $R_{K}$) and free water clearance ( $C_{H2O}$), whereas ratios of $K^{+}$ agonist N $a^{+}$ in urine and filtration fraction (FF) was not changed. SKF 81297, when administered into a renal artery, elicited diuresis both in experimental kidney given the SKF 81297 and control kidney not given, while the effect was more remarkable in experimental kidney than those exhibited in control kidney. SKF 81297 given into carotid artery also exhibited diuresis, the potency at this time, compared to those induced by intravenous SKF 81297, was magnusgreat. Above results suggest that SKF 81297 produces diuresis by both indirect action through changes of central function and direct action being induced in kidney. Central diuretic action is mediated by improvement of renal hemodynamics, but direct action by inhibition of electrolytes reabsorption in renal tubule.enal tubule. tubule.