• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.525-529
• /
• 2016

바이오매스 혼소는 신재생 에너지의 비중을 늘리면서 석탄화력발전에서의 $CO_2$ 배출을 저감할 수 있는 단중기적으로 가장 효과적인 방법이다. 본 논문에서는 이 중 기존 화력발전소에 가장 적은 초기투자비로 적용할 수 있는 직접 혼소법에 대하여 주로 고찰을 수행하고, 국내외 현황 및 전망에 대해 기술하였다. 직접 혼소법은 바이오매스 전용 미분기를 사용하여 혼소율을 늘리는 방법과 저 혼소율에서 초기투자비를 최소화하는 기존 석탄 미분기 사용 바이오매스 혼소법으로 나눌 수 있다. 유럽 및 미국에서는 혼소율을 높이기 위해 많은 상용발전소에서 바이오매스 전용 미분기를 사용하여 10~20% 가량의 혼소율(열량 기준)로 운전을 수행하고 있으나, 국내의 경우에는 RPS 대응을 위해 3~5% 가량의 혼소율에서 기존 석탄 미분기를 그대로 사용하여 바이오매스 혼소를 수행하고 있다. 신기후체제가 시작되고 석탄화력발전에서의 $CO_2$ 저감 요구가 점점 더 증대될 것으로 예상되는 바, 향후 바이오매스 고혼소율이 수행될 수 있는 기술적/저책적 방안이 모색되어야 하며, 이 경우 발생할 수 있는 설비에의 악영향을 면밀히 고려한 연료 표준화 및 전처리 기술이 개발되어야 한다.

• 한국국방경영분석학회지
• /
• 제17권2호
• /
• pp.44-53
• /
• 1991

This paper is aimed to develop a Lanchester type combat model for the direct-fire engagement. This model incorporates number of combatants, inter-firing time, detection time by movement, detection probability by the signature of fire, where the inter-firing time and the detection time are assumed to follow a negative exponential distribution. The approach to modeling is as follows : in the process of an engagement, a combatant takes one of the states('observing' state or 'firing' state), a combatant is initially in the observing state, if the combatant detects a target, he changes his state from 'observing' to 'firing' and will cause attrition to the opposing forces. Thus this transition mechanism is embodied into the differential equation form with each transition rate. A limited examination of the validity has been conducted by comparison with the Monte-Carlo simulation model 'BAGSIM', and with a traditional Deterministic Lanchester model.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.159-164
• /
• 2015

We manufacture artificial lightweight aggregates (ALWAs) using bottom-ash as the primary raw material. We coat the ALWA surfaces with low-melting point materials in order to enable them to bloat, which is essential to reduce the bulk density of the aggregate. Then, we sinter the prepared aggregates at 1000, 1100, and $1200^{\circ}C$ using either the direct or two-step firing schedules. Finally, we evaluate the properties of the fired samples through analyzing their bulk density, water absorption, and microstructure. The surface-modified samples result in a reduction of their bulk density by $0.3{\sim}0.4g/cm^3$ regardless of the firing method used. Based on these results, we conclude that this approach could provide a viable method for the mass-production of ALWAs from industrial waste such as bottom-ash.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1007-1012
• /
• 2016

Induction motors are used widely in driving load of a fluid, such as a pump or a fan in the industry. Induction motor has been generated the voltage drop by the occurrence of a high current during startup. In addition, high start-up current can act as a mechanical stress on the shaft of the motor. So there is need a way to reduce the starting current. Soft start method is one of the many ways to reduce the starting current. This method uses silicon-controlled rectifiers(SCRs) for varying value of the voltage applied to the motor. There is a case for fixing or changing the thyristor firing angle to adjust the magnitude of the voltage. Starting power factor of induction motor is very low compared to the normal operation. Soft starting with the firing angle fixed needs to be considered a low power factor at startup. In this study, we compared the direct start characteristics and soft start characteristics considering the low power factor at the time of start-up. It was possible to confirm that the starting current and the voltage drop is present differently according to the firing angle.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.31-38
• /
• 1991

A direct digital control technique of a current source using the phase-controlled rectifier is presented. A digital firing technique without sensing the line voltage is proposed. This scheme generates firing pulses directly from error signal between command and output voltage. Thus the phase detection transformers filters and zero-crossing detector are unnecessary. The synchronism is modeled and analized. Also a software synchronization algorithm is presented without a look up table and controls the system in real time with fast dynamic characteristics. Using the single-chip microprocessor 8097BH, the direct digital control is implemented with minimal hardware structure. Using the time-weighted performance index, the optimal discrete IPM control technique is also proposed to control the current of the PCR.

• 한국국방경영분석학회지
• /
• 제16권1호
• /
• pp.67-93
• /
• 1990

The Lanchester equations are widely used for modelling the direct-fire land battle. However, it is recognized that the Lanchester based models are less applicable to direct-fire land combat when the battle size is small, the forces are near parity or the inter-firing times of the combatants do not follw a negative exponential distribution. A comprehensive investigation has been conducted to establish the circumstances under which the Lanchester based models are applicable.

• The Korean Journal of Physiology and Pharmacology
• /
• 제15권3호
• /
• pp.163-169
• /
• 2011

Corticosterone is known to modulate GABAergic synaptic transmission in the hypothalamic paraventricular nucleus. However, the underlying receptor mechanisms are largely unknown. In the anterior hypothalamic area (AHA), the sympathoinhibitory center that project GABAergic neurons onto the PVN, we examined the expression of glucocorticoid receptor (GR) and mineralocorticoid receptor (MR) of GABAergic neurons using intact GAD65-eGFP transgenic mice, and the effects of corticosterone on the burst firing using adrenalectomized transgenic mice. GR or MR immunoreactivity was detected from the subpopulations of GABAergic neurons in the AHA. The AHA GABAergic neurons expressed mRNA of GR (42%), MR (38%) or both (8%). In addition, in brain slices incubated with corticosterone together with RU486 (MR-dominant group), the proportion of neurons showing a burst firing pattern was significantly higher than those in the slices incubated with vehicle, corticosterone, or corticosterone with spironolactone (GR-dominant group; 64 vs. 11~14%, p<0.01 by $x^2$-test). Taken together, the results show that the corticosteroid receptors are expressed on the GABAergic neurons in the AHA, and can mediate the corticosteroid-induced plasticity in the firing pattern of these neurons. This study newly provides the experimental evidence for the direct glucocorticoid modulation of GABAergic neurons in the AHA in the vicinity of the PVN.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.574-577
• /
• 2012

추력 측정은 액체로켓엔진 개발시험 시, 특히 연소기 개발시험 시에 성능 판단을 위한 매우 중요한 항목이다. 측정하기 어려운 경우에는 연소압을 통해 간접적으로 유추하는 방법을 쓰기도 하나 스탠드의 능력이 된다면 직접 측정하는 것이 필요하며 보다 더 정확하게 측정하기 위한 여러 가지 방안을 고려하게 된다. 본 논문에서는 국내 최초로 시도하는 액체로켓엔진 연소기의 수직형 연소시험설비에서 도입한 추력 측정 시스템에 대한 기본설계안을 소개한다.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.544-551
• /
• 2006

The sealing technique between a glass tube and a copper heat pipe in an evacuated tube solar collector is studied. In this study two different sealing techniques, such as flame method and furnace firing, are examined. After the sealing of a copper to a glass, the oxidation state of the copper and its bonding morphology were examined by SEM and XRD. Its oxidation was retarded by coating of borate solution on the copper, and $Cu_2O(cuprite)$ turned into CuO(tenorite) with increase in a firing temperature and firing time. Porous structure was found in the oxide layer when CuO formed. The best sealing morphology was observed when the thickness of the oxidation layer was less than $20{\mu}m$. The sealing technique performed in a furnace was promising and the satisfactory result was obtained when the sample was fired at $950^{\circ}C$ for 5 min under $N_2$ atmosphere. Annealing procedure is recommended to remove the stress left at the bonding zone.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.49-56
• /
• 2020

소총 사격 중 발생하는 고온의 열은 총기의 성능을 저하시킬 뿐 아니라 사용자의 원활한 운용에 제한을 가져온다. 본 연구에서는 인간공학 설계 기준을 참조하여 사격에 따른 총열덮개의 온도변화를 측정하고 재질에 따른 운용성을 검토하였다. 인간공학 설계 기준은 피부에 직접적으로 닿을 경우 단열재를 필요로 하는 것을 명시하고 있다. 이에 따라 사격시험을 위하여 총열덮개의 재질별로 대한민국 제식소총 3종과 해외 모델 1종을 선정하였으며, 접촉식 온도 측정기를 이용하여 사격시험을 실시하였다. 시험결과 열전도도가 낮은 플라스틱 총열덮개를 사용하는 소총과 열전도도가 높은 알루미늄 총열덮개를 사용하는 소총 모두 낮은 온도에서 100발 이상 사격에도 맨손으로 운용이 가능하였다. 그러나 평균 대기온도에서 약 60발 이상 사격 시 알루미늄 총열덮개는 맨손으로 운용이 제한되며, 다량으로 빠른 시간에 사격이 이뤄질 경우 덮개 재질에 관계없이 총열덮개의 운용이 제한되었다. 소총의 발열에 의한 운용제한 해소를 위해서는 장갑 또는 손잡이, 덮개 등을 활용하여 피부와 직접적인 접촉 차단이 필요하다. 본 연구를 통해 소총의 열 위험에 대한 운용성을 파악할 수 있었으며, 타 소총 및 군수품의 인간공학적 설계를 위한 기초자료로 활용 될 수 있을 것으로 기대된다.