• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.1-25
• /
• 2020

This study analyzed key success factors of Korean car-sharing enterprises, Socar and Greencar, and the responsive strategies of Korean car-manufacturing company, Hyundai Motor Group, in the face of emerging sharing economy under the specific economic and regulatory system in Korea. The outcomes of the analysis are as follows. 'Timely market entry' in early startup phase and 'use of external resources' in early growth phase were key success factors common to both Socar and Greencar. However, the differences in the eventual business directions of the two companies also resulted in different key success factors in the expansion phase of their business. For Socar which focused on maintaining its independence and the external growth of B2C business, customer relation marketing and sufficient capital raising were key success factors. For Greencar which became a part of a business group and focused on improving the efficiency of business operations, timely market entry (B2B market) was key success factor. The use of external resources and cooperation with large corporations emerged as key success factors common to both companies in the rapid growth phase. The responsive strategies of the Hyundai Motor Group were collaboration, investment and direct management of DeliveryCar. The short-term goal of the responsive strategy was the operation of test-bed in collaboration with car-sharing company while the mid/long term goal was planning new mobility services by utilizing collected data. Securing opportunities for early market dominance for autonomous car industry was also found to be an important goal.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.269-281
• /
• 2018

Unlike its archetype predecessor such as the Highway Capacity Manual of the United States, the Korean Highway Capacity Manual of 2013 provides the analytical models for estimating the saturation flow rates for the lane-occupying work-zones in the proximity of the signalized intersections. Direct application of the revised saturation flow rates into the classic control delay models, however, appears to produce unreasonable delay amount as traffic demand approaches lane-group capacities and surpasses them, which is common phenomena in the work-zones. Complex interaction among vehicles, lane-dropping work-zone geometry and signal operations were never accounted in the traditional control delay models, and considerable differences between the delay model outcomes and field observations are repeatedly experienced. This paper proposes the modified approaches to the delay models in the manual, exerted on all three elements of control delay, and particularly focuses on the temporal and spatial boundary expansion in comparing the simulated results to the estimated ones. Extensive microscopic simulation work and calibration effort supports the modified approaches well enough to use them in the work-zone planning and evaluation.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.286-294
• /
• 2013

Increasing concern for the health, well-being, and income of the people has expectedly brought continuous increase in the industrial value of medicinal plants in recent years as these are also used in foods and cosmetics. However, Korea's increased import of these products from China due to the FTA contract causes negative effects on its industrial value. In this regard, various measures for medicinal crop seed development and production, organization and expansion of circulation and forest land use deregulation are needed to promote the agricultural food industry including medicinal plants. As a measure, first, a database of medicinal plants should be built that can help to promote the national medicinal industry and the seed management system. Second, agricultural productivity should be enhanced via the development and supply of varieties of high quality medicinal plants. Third, there should be a good practice of the system maintenance for the production and supply of medicinal crop seeds. Fourth, production and distribution system of medicinal plants should be established by standardization of high quality seeds. Nowadays, the consumption pattern of medicinal crops is changing from direct ingestion to cosmetics, drugs, and food and this is expected to increase continuously. Consequently, the increased production of medicinal crops will support the development policy and the institutional improvement in response to this trend of the positive change of industrialization.

• Korea journal of population studies
• /
• v.29 no.1
• /
• pp.25-56
• /
• 2006

This study attempts to review the increasing trend in international marriage of Koreans since 1990 and explore the pattern of socio-demographic characteristics of the married couples. This paper develops a conceptual scheme for changing pattern of nuptiality including an increase in international marriage. As the key forces behind the recent increase in international marriage of Koreans, the effects of rapid decline in fertility, rise in sex ratio at birth, urbanward migration of young women, expansion of gender-equity norms, and globalization are stressed. Micro-data from the marriage registration for the period $1990{\sim}2004$ and the divorce registration for the period $2000{\sim}2004$ are utilized. This study focuses on analyzing age at marriage, previous marital experience, education, occupation, and residence of the married couples. Attention is also focused on demographic characteristics of the divorced couples. Results of analyses reveal that there exists a great deal of diversity in international marriage of Koreans. A notable aspect is the profound differences between Korean men and women in the characteristics of their foreign spouses and themselves as well. Another prominent factor emphasized in the analysis is the nationality of foreign spouse. It is indicated that the stereotype of international marriage facilitated by marriage squeeze can be mainly applied to marriages between Korean men and foreign wives from China, southeast Asian countries and the CIS of the old Soviet Union. On the other hand, direct effects of value transformation and globalization are emphasized in the explanation of marriages between Korean men and foreign wives from more developed countries as well as marriages between Korean women and foreign husbands.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.207-231
• /
• 2017

Printmaking is a field of fine arts and is placed on a vague boundary that is perceived as a commercial product with a popular character due to the speciality of editions. Advances of modern science and technology has developed a new technique of printmaking, and the fusion of printmaking and computer has shown the possibility of reproduction art. Reproduction printmaking has been heavily influenced by photography and extended areas, and the various forms of printing have brought about many changes and attempts by stimulating the possibilities of indirect art at various angles. As the history of printmaking and technology closely relate, the development of computer makes widespread expansion of plural artistry, technological and artistic change. A new conceptual shape can be created on the copied image simply by placing the material of the print on the smoothly flat surface expressed in digital form. The process and the result of such work show the area of unique work which is different from the value of the $\grave{a}$ la carte art or the characteristics of the material given by the print. The deprecated perception of reproducibility evaluated the value of the work in a direct sense of printmaking. It is undeniable that it is devalued by a bundle of works regardless of the value of each edition. However, the physical properties of the prints on the paper are brought up with hand drawings drawn on the canvas by hand. And it becomes an opportunity to show new aspect and change through the process of combining digital print information on paper. The diversity of media is sometimes a controversy of identity between art and technology. In the future, it should be discussed how the limit of the media which can be enjoyed in the field of art can be set as a standard.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.359-370
• /
• 2000

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow), three conventional hybrid(Z-100, Z-250, P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear modulus (G'), loss shear modulus(G"), loss tangent(tan ${\delta}$) and complex viscosity(${\eta}^*$) of the resin composites as a function of frequency - dynamic frequency sweep test from 0.01 to 100 rad/s at $25^{\circ}C$ - by using Advanced Rheometric Expansion System(ARES). To investigate the effect on the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1. The complex viscosity ${\eta}^*$ of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity ${\eta}^*$ of condensable resins was higher than that of hybrid resins. The order of complex viscosity ${\eta}^*$ at ${\omega}$=10 rad/s was as follows, Surefil, Synergy compact, P-60, Z-250, Z-100, Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04~0.56 but Surefil was 30.4 times higher than that of Z-100. 2. The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan ${\delta}$, of resin composites with increasing frequency were significantly different between brands. The phase angles, ${\delta}$, ranged from $30.2{\sim}78.1^{\circ}$ at ${\omega}$=10 rad/s. 3. All composite resins represent pseudoplastic nature with increasing shear rate. 4. The complex shear modulus $G^*$ and the phase angle ${\delta}$ was represented by the frequency domain phasor form, $G^*({\omega})=G^*e^{i{\delta}}=G^*{\angle}{\delta}$. The locus of frequency domain phasor plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5. There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.157-165
• /
• 2015

At the end of the 19th and in the early 20th centuries, Japan, Korea, and Manchuria, and areas throughout East Asia, suffered a number of cycles of growth and development, for which the railway was a very important development tool and was closely associated with national policy. East Asian affairs, especially at the time, seemed very important to the continent, and their influence on the advance of this remarkable era was especially prominent in Japan. In the midst of this period, the national railway may have evolved under national policy and railway policy and under a variety of organizations and persons of influence. In this paper, we have tried to find the similarities and differences among the three countries that built the East Asia Railway; we consider the characteristics of the East Asia Railway from the perspectives of these three countries. Comparing the characteristics of the three country's railways, first, Japan had the motives of continental expansion and modernization in its pursuit of the railway; in Korea, the railway played the role of a continental rail link; and in Manchuria there was a tendency to pursue direct domination of the railway. Second, the Japanese applied their railway model to Korea; the Korean railway may have been in operation, but it was an extension of the railway of Japan. The railway in Manchuria showed a similar pattern to that which can be found in the state of Asian domination of Europe ; Japan showed aspects of dominance over the railway because it had experience running a private railway.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.83-92
• /
• 2016

In this paper, we introduce the results of the testing and observation systems for performance wideband expansion in the Korean VLBI Network(KVN). The KVN performs VLBI observations to 1024 Mbps data rate, and 8192 Mbps observing for four simultaneous observation is now evaluating for normal operation. The VLBI stations in several world countries developed their own wideband observing systems to observe the celestial objects with high precision and high resolution or are working with several countries. The KVN is planning to introduce a high-speed sampler, OCTAD, for sampling directly up to 2048 MHz bandwidth for RF signal of K/Q/W/D band in the frequency band without conversion. Therefore, as a preliminary study for the performance scalability of the KVN then through the close cooperation with National Astronomical Observatory of Japan (NAOJ), the OCTAD high-speed sampler and OCTADISK2 high-speed recorder were installed in the KVN Yonsei station, and verify the performance through a wideband.

• Environmental and Resource Economics Review
• /
• v.27 no.1
• /
• pp.139-160
• /
• 2018

Using survey data of selected 1,349 individuals nationwide in Korea, we measure the influencing factors for the acceptance of nuclear power and estimates the probability of acceptance under several scenarios with different percentages of monetary compensation. Results of panel probit demonstrate that nuclear risk aversion tendency was found to be higher in case of female, younger age, past experience of extreme event such as an earthquake. However, the residents' residency nearby the nuclear power plant was not related to the risk-aversion tendency. In addition, we found that the nuclear acceptance is improved when the monetary compensation rate is increased. Although the policy demand intended to reduce GHG emissions in South Korea, the expansion of nuclear power is not be easy due to the occurrence of recent strong earthquakes because the risk attitude of an individual is influenced by subjective assessments formed through direct and indirect experiences of natural disasters such as an earthquake. Our results suggest that the opposition to construction of nuclear power plant is expected to be further intensified especially when combined with the experiences of threatening earthquakes. As a result, the debate and policy conflicts of nuclear power plants will consistently continue and large social costs are apparent for the acceptance of nuclear power plant.

• International Area Studies Review
• /
• v.21 no.2
• /
• pp.71-96
• /
• 2017

This study analyzes the process of overcoming the impoverishment due to the failure of North Korea planned economy through marketization. Recognizing the economic policy presented by the convergence of market and planned economy system as a economy system and focusing on the 7.1 Economic Management Measures and the 6.28 New Economic Management Measures. The marketization is classified the indigenous marketization (1990-2001), the marketization focusing on central distribution (2002-2011), the marketization focusing on production (2012-2017). The major events, the economic circular structure and the economic behavior were analyzed. Results showed as following: First, through the process of marketization starting from the expansion of farmers' market and the marketization focusing on distribution, the marketization focusing on production to the marketization focusing on finance. And as the evolution of it continues, to some extent a poverty has been overcomed. Second, corporate institutions, agricultural institutions, financial institutions and progress in becoming a market economy direction. A series of privatization starting from small one to large-scale one have been progressing. Third, in order to overcome the impoverishment completely. Through foreign investment the industrialization covering a wide range of industries are urgently needed, Domestic agricultural reform, enterprise reform, price reform, financial reform, financial reform, trade and direct investment, reform, reform, distribution, etc are needed. The economic reforms across almost all sectors are needed to be combined in a global economy Expanding employment, the acquisition of foreign currencies and the acquisition of technology in the process should also be realized. The direction of change of this series of economic structures has turned Public sector and centralized into Private sector and Decentralization.