• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.203-207
• /
• 2009

Neyman-Scott Rectangular Pulse 모형(NSRPM)은 Poisson process에 기초를 둔 모형으로 수자원분야에서는 강수자료를 생성하는데 널리 쓰이고 있다. NSRPM을 구축하기 위해서는 기존에 관측된 강수 자료를 이용하여 NSRPM의 매개변수를 추정하여야 한다. NSRPM의 매개변수를 추정 시 강수자료의 모멘트와 매개변수로 구성된 모멘트식을 비교하여 매개변수를 추정한다. 기존에 사용된 모멘트를 이용한 NSRPM의 매개변수 추정방법의 경우 매개변수로 구성된 모멘트식을 증명하여야지만 NSRPM의 매개변수를 추정할 수 있다. 또한 증명된 모멘트식이 없는 모멘트 값의 경우 매개변수 추정 시 사용하지 못하는 단점이 있다. 이런 한계점으로 인하여 NSRPM 의 수정 및 추정이 어려워 NSRPM은 널리 사용되지 못하고 있다. 본 연구에서는 매개변수 추정방법의 따른 한계점을 극복하고자 직접적인 매개변수 추정방법을 제안하였다. 직접적인 매개변수 추정방법은 모멘트 식을 이용하지 않고 생성된 자료를 이용하여 직접적으로 매개변수를 추정하는 방법이다. 본 연구의 대상지점은 금강유역의 대전으로 선정하였으며, 사용된 자료는 기상청에서 운영하는 대전 지상관측소 강수자료를 사용하였다. 총 39년의 자료를 이용하여 각 방법을 이용하여 매개변수를 추정하였다. 실험결과 직접적인 추정방법이 기존 매개변수 추정방법보다 더 정확한 매개변수를 추정하는 것을 확인 할 수 있었다.

• The KIPS Transactions:PartD
• /
• v.10D no.5
• /
• pp.837-844
• /
• 2003

The software reliability have to be improved as one major method to enhance the quality of developed software, and its defect is detected and modified through testing as a direct way to meet the purpose before releasing. Once its reliability grows up to the target and it is released to public. there nay be operational reliability problem. The operational software reliability trend nay be different depending on the condition whether it is universal or dedicated. And its reliability estimation is changed based on the condition if it follows uniform testing efforts or Weibull testing efforts. I study the operational reliability trend of dedicated software, applying two case testing efforts for the released item.

• Health Policy and Management
• /
• v.20 no.1
• /
• pp.1-18
• /
• 2010

This article examines social determinants of population health in OECD countries, where life years, infant mortality, and PYLL are used as proxy variables of health. The unit of analysis is a country which is the OECD affiliate. A panel regression estimation is chosen as a method, using OECD Health Data. The results are: the increasing national health expenditure affected positively to improve population health. Education was rather a significant determinant of health than income level. The government direct investment for public health did not contribute positively to enhance population health. The expansion of health care coverage was working positively for improving health, but with a time lag. The supply of doctors was a most influential determinant of health. In case of Korea, the coverage expansion of health care was the most important determinant of health. The supply of doctors was, however, not a positive factor for better health, which is different result with the case of OECD countries.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.274-278
• /
• 2004

This paper presents a strategy to drive built in-type spindle induction motor which is used as CNC (Computer Numerical Control) in the industrial world. The direct vector control which is robust to the changed machine parameters in the high speed range is used in this motor control method. And electrical model of induction motor presents the basic idea based on observer structure, which is composed of voltage model and current model. But the former has the defects in low speed range, the latter has the defects of sensitivity to motor parameter. Thus Gopinath model flux estimator which is the closed loop flux observer based on two models for the rotor flut estimation is used in this paper. Moreover this paper presents to drive the spindle motor in the high speed range by using the flux weakening control.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1567-1576
• /
• 2015

Offline inductance identification of a permanent magnet synchronous motor (PMSM) is essential for the design of the closed-loop controller and position observer in sensorless vector controlled drives. On the base of the offline inductance identification method combining direct current (DC) offset and high frequency (HF) voltage injection which is fulfilled at standstill, this paper investigates the inverter nonlinearity effects on the inductance identification while considering harmonics in the induced HF current. The negative effects on d-q axis inductance identifications using HF signal injection are analyzed after self-learning of the inverter nonlinearity characteristics. Then, both the voltage error and the harmonic current can be described. In addition, different cases of voltage error distribution with different injection conditions are classified. The effects of inverter nonlinearities on the offline inductance identification using HF injection are validated on a 2.2 kW interior PMSM drive.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.160-166
• /
• 2009

We estimated site productivity for unstocked land based on the relationship between site index (i.e., average height of dominant trees at fixed age) and soil physico-chemical properties of Pinus densiflora stands. Site index relates to a direct method of determining a tree's response to a specific environment such as forest soil and climate conditions. We selected 78 sites in 22 P. densiflora stands of central temperate forest zone, and sampled soils for physicochemical analyzing. And 13 properties of soils were statistically treated by stepwise regression. In the degree of contribution of the variables to site index, the highly effective variables in A horizon were OM, clay content, sand content, available $P_2O_5$, and Exch. $Ca^{{+}{+}}$ inorder, and in B horizon T.N., O.M., Soil pH, cation exchange capacity(C.E.C.), and sand content in order. In both A and B horizon of the soil for P. densiflora stands, the variables commonly contributed to the site index were sand content and OM. These results may be useful to provide not only important criteria for establishment of Pinus densiflora stand sespecially in unstocked land but also aguidance for reforestation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.843-846
• /
• 2004

Cavity tone is generated due to the feedback between flow and acoustic wave. It is recognized that the period is determined by the time required for the flow convection in one direction, the time required for the acoustic propagation in the other direction and the time for phase shift depending on the flows and mode. Most of the phenomena have been investigated by experiments and a simple but fundamental theory. But the cause of the phase shift and the correctness of the theory have not been clearly explained so far. In this paper, the phenomena are calculated numerically to obtain detail information of flow and acoustic wave to explain the mechanism including the phase. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. The data are reduced using cross correlation function in space and time and cross spectral density function which has phase information. Abrupt change in pressure near corner in cavity is observed and is relate to phase variation. The time required for the feedback between the flow and acoustic wave is calculated after the numerical simulation f3r various modes. The periods based on the time calculated using the above method and direct observation from the acoustic waves generated and propagated in the numerical simulation are compared. It is found that no phase shift is required if we examine the time required carefully. Rossiter's formula for the cavity tone used for quick estimation needs to be modified far some modes.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.681-690
• /
• 2008

The software reliability have to be improved as one major method to enhance the quality of developed software, and its defect is detected and modified through testing as a direct way to meet the purpose before releasing. Once its reliability grows up to the target and it is released to public. there may be operational reliability problem. The operational software reliability trend may be different depending on the condition whether it is universal or dedicated. And its reliability estimation is changed based on the condition if it follows uniform testing efforts or Weibull testing efforts. I study the operational reliability trend of dedicated software, applying two case testing efforts for the released item.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.373-382
• /
• 2015

Purpose: In this paper, we developed a reliability index (RI) to efficiently compare reliability of products based on the design, development and production information such as reliability tests, quality, product life-cycle management. RI also can be applied to reliability prediction of a novel product as well as comparison evaluation among existing products. Methods: For evaluating RI, we proposed evaluation process which is composed of five steps. Target modules are selected based on warranty data and correlation analysis. Scores of selected target modules are calculated by scoring function. Finally, weights of RI model are determined by optimization method. Results: This paper presented an empirical analysis based on failure data of mobile devices. In this case study, we demonstrated that there is a direct correlation between evaluated RI and field failure probability of each product. Conclusion: We proposed the index for comprehensive and effective assessment of product reliability level. From the procedure of this study, we expected to be applied for reliability estimation of novel products and deduction of field failure-related factors.

• Journal of Radiation Protection and Research
• /
• v.30 no.3
• /
• pp.107-112
• /
• 2005

Cascade summing occurs when two gamma-rays emitted in the decay of a single nucleus both deposit energy in a detector. The effect may cause systematic errors that can reach levels of more than ten percent for some radionuclides. A method for estimation of the effect of these coincidences was developed. It is based on direct computation of the effect by means of peak to total ratio measured for the place around the detector. It has been shown that the P/T ratio for the given energy in the working space around the detector may not be a constant value and must use its mean value. Some results from a peak to total calibration study in the presence of scattering materials are also given.